Electrical Tester
Order no.: PCE-DC 41-ICA
The electrical tester PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the electrical tester, or you can use the integrated clamp mechanism. By using the clamp of the electrical tester, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.
- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Order no.: PCE-BMM 10
This PCE-BMM 10 electrical tester is equipped for mobile as well as stationary operation. The electrical tester PCE-BMM 10 can be used with mains voltage (AC power adapter) as well as in battery mode as supply voltage. A large range of functions of the measuring ranges leaves hardly anything to be desired.
- DC voltage
- AC voltage
- DC
- AC
- Diode test
- Frequency measurement
- Continuity measurement
- Resistance measurement
Manufacturer: PCE Instruments
Order no.: PCE-ITM 20
This digital electrical tester PCE-ITM 20 combines a versatile multimeter with an insulation tester.
In addition to the usual measured quantities such as voltage, current and resistance, this digital electrical tester PCE-ITM 20 is also equipped with a frequency and capacitance measurement.
- Automatic range selection
- Capacitance measurement
- Integrated isolation tester
- Internal memory
- To IEC 1010, CAT III 1000V, CAT IV 600V
- Frequency measurement
Manufacturer: PCE Instruments
Order no.: PCE-IT 120
The electrical tester PCE-IT 120 detects insulation resistance up to max. 8 GΩ (with auxiliary voltages of 250, 500 and 1000V). In addition, this PCE-IT 120 electrical tester offers a measuring function for DC and AC voltages up to max. 950V DC and 700V AC as well as resistors up to max. 2 kΩ.
- DC test voltage: 250/500 / 1000V
- OLED display
- Automatic polarity display
- Automatic range selection
- PI and DAR test
- Degree of protection / standardization: IEC 1010-1, 700V CAT III
Manufacturer: PCE Instruments
Order no.: PCE-GPA 50
The PCE-GPA 50 electrical tester is used to measure the current of 1- or 3-phase loads. This electrical tester PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the electrical tester.
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Manufacturer: PCE Instruments
Order no.: PCE-123
PCE-123 is an electrical tester used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use tester provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the tester useful in a wide range of applications.
- DC current: 4 - 20 mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000 V, 0 - 12.000 V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
Manufacturer: PCE Instruments
Order no.: PCE-123-ICA
PCE-123 is a electrical tester used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use electrical tester provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the electrical tester useful in a wide range of applications.
- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Order no.: PCE-PA 8000
PCE-PA 8000 is a portable handheld power analyzer used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.
- True RMS measurement for ACA, ACV
- True power: W, KW, MW
- VA, KVA, MVA, VAR, KVAR, MVAR
- PF (power factor), phase angle (Φ)
- KWH, KVAH, KVARH, PFH
- Voltage measurement range: 10 ... 600 ACV
- Current measurement range: 0.2 ... 1200 ACA
- Real-time current, voltage and power consumption measurement
- Built-in data recorder with adjustable sample rate: 2 ... 7,200 sec.
Manufacturer: PCE Instruments
Order no.: PCE-PA 8300
The easy-to-use PCE-PA 8300 Electrical Tester is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:
- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage
Manufacturer: PCE Instruments
Order no.: PKT-1260
Electrical Tester PKT-1260 with high-resolution TFT / USB port for real-time data transmission / 20 automatic measurement modes and FFT function.
- Bandwidth: 200 MHz
- Display: 20 cm (8”) TFT with 65536 colors
- Resolution: 800 x 600 Pixel
Manufacturer: Peaktech Prüf- und Meßtechnik GmbH