Electrical Tester

Electrical Tester to test leakage / RMS measurement / continuity and resistance test.

• Measures current up to 100 A
• Measures voltage up to 600 V
• Measures resistance up to 400 O
• Test cables are included

The electrical tester has a measuring range of 0 … 1000 A AC/DC. The current is measured inductively using the clamp on the measuring device. Live supply lines with a diameter of up to 32 mm (1.2") can be connected to the electrical tester.

• Measuring range: 0 … 1000 A AC/DC
• Bluetooth interface
• Inrush current measurement
• LC color display
• Not Connected Voltage function

PCE-PCM 1 is a multipurpose electrical tester or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

• Voltage (50 … 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
• Internal memory: Stores up to 99 measurement values
• Includes USB cable and PC software
• Three-phase power measurement
• True RMS

The electrical tester PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the electrical tester, or you can use the integrated clamp mechanism. By using the clamp of the electrical tester, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.

• Voltage: 600 V AC/DC
• Current: 600 A AC/DC
• Electrical Resistance: 1000 Ω
• Clamp mechanism

Electrical Tester for insulation resistance up to 2000 MΩ

• Measuring ranges AC voltage: 0 … 750V
• Resolution AC voltage: 1V
• Accuracy AC voltage: ± 1.2% ± 10 dgts
• Complies with IEC1010-1, CAT III 1000V
• Large display with backlight
• Individual measurement and duration measurement

Electrical tester for measuring AC/DC current, AC voltage and resistance. This electrical tester is designed to indirectly detect AC/DC current and ohms. The electrical tester has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The electrical tester comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
• Incl. ISO Calibration Certificate

This electrical tester was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this electrical tester.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function
• Incl. ISO Calibration Certificate

The electrical tester PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the electrical tester, or you can use the integrated clamp mechanism. By using the clamp of the electrical tester, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.

• Voltage: 600 V AC/DC
• Current: 600 A AC/DC
• Electrical Resistance: 1000 Ω
• Clamp mechanism
• Incl. ISO Calibration Certificate

The electrical tester PCE-DC 50-ICA is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the electrical tester can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.

• Current measurement up to 1000 A
• Cover of the measuring sockets
• Voltage measurement up to 600V
• Temperature measurement via 2 thermocouples
• Bluetooth interface
• incl. ISO Calibration Certificate