Data Logger / Data Logging Instrument

Order no.: PCE-KD3-Serie

The data logger PCE-KD3 was developed to measure and record measured values ​​of standard analog signals or temperature sensors. In addition, the data logger PCE-KD3 can visualize the measured values ​​graphically. The PCE-KD3 is optionally equipped with 1, 4 or 8 measuring channels.

- Analog inputs: 4 ... 20-mA / 0 ... 10V, RTD / TC (selectable)
- Digital input: 24V DC
- Resolution: 12 bits
- Measuring channels: Maximum 8 (selectable)

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SDD

PCE-SDD is a food-grade data logger with internal sensor for monitoring high temperature processes carried out from -20 ... +140 °C / -4 ... +284 °F. These logging instruments are manufacturer calibrated - an ISO calibration certificate is available as an option. Ideal for use in sterilizers, pasteurizers, autoclaves, incubators, dryers and dishwashers, this high temperature data logger:


- Features a food-safe, stainless steel housing (AISI 316L + PEEK)
- Boasts an IP68 dust- and water-resistance rating
- Repower pressure-tight up to 10 bar
- Memory for 20,000 readings from 1-sec interval

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDR 10

PCE-VDR 10 is a single-axis accelerometer or vibration data logger monitor with real-time measurement and data logging capabilities. This vibration data logger records acceleration (m/s, g, ft/s) as well as velocity (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory. There is also an analog output, which makes this vibration data logger compatlble to control systems.

- Acceleration measuring range: 
  0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Velocity measuring ranges: 
  0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LOC 20
The current/voltage data logger PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the current/voltage data logger to be used to set process displays, data loggers, paperless recorders, etc.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TTC 30
The temperature data logger PCE-TTC 30 can be used to simulate different thermocouples as well as mV. Thus, the temperature data logger can be used for many thermometers and temperature displays with thermocouple connection.

- Simulation and measurement mode for thermocouples E, J, K, T, B, R, S, N, mV
- 24V supply for current loops
- HART compatible
- continuity test
- Data logger function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SDD 10

PCE-SDD 10 is a food-grade data logger with a 10 mm / 0.39" external sensor for monitoring high temperature processes carried out from -20 ... +140 °C / -4 ... +284 °F. These logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option. Ideal for use in sterilizers, pasteurizers, autoclaves, incubators, dryers and dishwashers, this high temperature data logger:


- Features a food-safe, stainless steel housing
  (AISI 316L + PEEK)
- Boasts an IP68 dust- and water-resistance rating
- Repower pressure-tight up to 10 bar
- Memory for 20,000 readings from 1-sec interval

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SDD 100

PCE-SDD 100 is a food-grade data logger with a 100 mm / 3.94" external sensor for monitoring high temperature processes carried out from -20 ... +140 ° C / -4 ... +284 ° F. The logging instruments are manufacturer calibrated an ISO calibration certificate can be bought optionally. Ideal for use in sterilizers, pasteurizers, autoclaves, incubators, dryers and dishwashers, this high temperature data logger:


- Features a food-safe, stainless steel housing (AISI 316L + PEEK)
- Boasts an IP68 dust- and water-resistance rating
- Repower pressure-tight up to 10 bar

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SDD 150

PCE-SDD 150 is a food-grade data logger with a 150 mm / 5.91" external sensor for monitoring high temperature processes carried out from -20 ... +140 ° C / -4 ... +284 ° F. The logging instruents are manufacturer calibrated and can be equipped with an ISO calibration certificate aditionally. Ideal for use in sterilizers, pasteurizers, autoclaves, incubators, dryers and dishwashers, this high temperature data logger:


- Features a food-safe, stainless steel housing (AISI 316L + PEEK)
- Boasts an IP68 dust- and water-resistance rating
- Repower pressure-tight up to 10 bar
- Memory for 20,000 readings from 1-sec interval

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SDD 20

PCE-SDD 20 is a food-grade data logger with a 20 mm / 0.79" external sensor for monitoring high temperature processes carried out from -20 ... +140 ° C / -4 ... +284 ° F. The logging instruments are delivered manufacturer calibrated. An ISO calibration certificate is an option. Ideal for use in sterilizers, pasteurizers, autoclaves, incubators, dryers and dishwashers, this high temperature data logger:


- Features a food-safe, stainless steel housing (AISI 316L + PEEK)
- Boasts an IP68 dust- and water-resistance rating
- Repower pressure-tight up to 10 bar
- Memory for 20,000 readings from 1-sec interval

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SDD 50

PCE-SDD 50 is a food-grade data logger with a 50 mm / 1.97" external sensor for monitoring high temperature processes carried out from -20 ... +140 °C / -4 ... +284 °F. These logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option. Ideal for use in sterilizers, pasteurizers, autoclaves, incubators, dryers and dishwashers, this high temperature data logger:


- Features a food-safe, stainless steel housing (AISI 316L + PEEK)
- Boasts an IP68 dust- and water-resistance rating
- Repower pressure-tight up to 10 bar
- Memory for 20,000 readings from 1-sec interval

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-KD3-WGH

PCE-KD3-WGH is an eight channel data logger or display recorder designed to record analog measurements of 4 ... 20 mA sensors or RTD (PT100, PT500 and PT1000) temperature sensors. In addition, PCE-KD3-WGH is a multichannel universal indicator that visualizes readings graphically on its LCD screen. The instrument can be mounted on a wall via its IP65-protected housing.


- Analog inputs: 4 ... 20 mA, RTD (selectable)
- Digital input: 24 V DC
- Resolution: 12 bits
- Measuring channels: Maximum 8 (selectable)
- Memory: 8 MB, approx. 2 million readings

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 1200

PCE-T 1200 is a 12-channel temperature data logger that accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel.

- 12-channel data logger for temperature (°C / °F)
- Works with type K, J, T, E, R and S thermocouple sensors
- Adjustable datalogging interval from 1 ... 3600 seconds per channel

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-KD9

The Multi Channel Data Logger PCE-KD9 can be applied to either capture, visualize, save or control measuring data and processes. This multi channel data logger is a device for universal application based on Linux operating systems. Through three slots, each with inputs, the multi channel data logger can be equipped with up to 72 analogue inputs, 72 binary inputs, 36 TC inputs (e.g. type K thermal element), 18 RTD inputs (e.g. PT100 probes), 36 relay / SSR- inputs or 24 analogue outputs.

 

- Max. 72 analogue and binary inputs
- Graphics-capable 5.7" TFT display with touch screen
- Transmitter power supply 24 V DC / 200 mA
- 8 integrated PID controllers
- Interface RS485 / Modbus RTU
- Dimensions: 144 x 144 mm

 

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCA 50
The calibrator data logger PCE-MCA 50 is intended for calibration and maintenance. This calibrator data logger PCE-MCA 50 enables the measurement and simulation of electrical quantities. Due to the battery operation, the calibrator data logger PCE-MCA 50 can be used in different locations.

- Simulation
- Pulse generation
- Pulse count
- Frequency generation
- Frequency measurement
- Extreme value and average measurement
- Continuity test
- USB interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 5000

The 4-channel PCE-VM 5000 Data Logging Instrument performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m long, so the vibration measuring device is able to record vibrations at different points of the component to be tested. These Data Logging Instrument are manufacturer calibrated. An ISO calibration certificate is an option.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously, 2 included
- Data storage on SD card

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-KD7

The multi channel data logger PCE-KD7 can be used as a data logger in measurement and control systems. The application area of ​​this multi channel data logger includes the measurement, visualization, monitoring and storage of process variables in various industrial branches, eg in the pharmaceutical, food or chemical industry. In addition to the analogue standard signals in the form of currents and voltages, this digital multi channel data logger can also process different types of thermocouples and resistance temperature sensors on up to 12 channels. It is also possible to retrieve up to 16 measured values ​​via the digital interfaces Ethernet or RS-485 and also to store them.

 

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PA 8300

The easy-to-use PCE-PA 8300 Three Phase Power Data Logger is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-830-1

The PCE-830 Three Phase Power Data Logger Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Three Phase Power Data Logger Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm / 1.1 in diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-830-1-ICA

The PCE-830 Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Data Logger also measures such parameters as voltage, current, frequency, hrmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-830-2

The PCE-830-2 Three Phase Power Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This Three Phase Power Data Logger also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.1 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Manufacturer: PCE Instruments
Test Instruments manufacturer