Data Logger / Data Logging Instrument

Temperature Data Logger PCE-T 330-ICA incl. ISO Calibration Certificate
£ 272.00
Price excl. VAT &. delivery
ISO Calibration

The temperature data logger has two measuring inputs. Each measuring input from the temperature data logger can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the temperature data logger shows rapid temperature fluctuations.

  • Measuring range dependent on sensor: -200 … 1370 °C / -328 … 2498 °F
  • Resolution: 0.01 °C
  • Two-channel temperature data logger
  • For thermocouples type K, T and J
  • Data storage for 20,000 measuring points
  • incl. ISO Calibration Certificate

Accelerometer Data Logger PCE-VDL 24I 3-Axis
£ 273.00
Price excl. VAT &. delivery
For this data logger PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

  • 3-Axis acceleration up to 1600 Hz and ±16 g
  • Evaluation software
  • 32 GB SD memory card
  • Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Pressure Data Logger PCE-PDR 10
£ 278.00
Price excl. VAT &. delivery
The PCE-PDR 10 pressure data logger is a pressure measurement gauge. Up to three pressure sensors can be connected to this pressure data logger and synchronously read out and logged. Thanks to the 4 … 20-mA input signal, many different pressure sensors can be connected. 

  • 4 … 20-mA measuring signal
  • Intelligent storage system
  • Connection to a PC via RS232
  • Wall mounting for permanent installation
  • SD card slot for up to 16GB
  • Measurement of three pressure sensors simultaneously
  • Sensors must be selected as an option!
Air Velocity / Temperature Data Logger PCE-007
£ 286.00
Price excl. VAT &. delivery

This Data Logger meter is very economical. With this Data Logger meter you can measure wind speed and air temperature. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

  • Speed measurement up to 45 m/s or 100 mph
  • Wind speed: 0.01 m/s, accuracy ±3% ±0.1
  • Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
  • Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

Data Logging Sound Level Meter PCE-SDL 1-ICA incl. ISO-Calibration Certificate
£ 289.00
Price excl. VAT &. delivery
ISO Calibration

PCE-SDL 1 is a class 2 (type 2) data logging sound level meter, sound pressure level (SPL) meter, noise meter or decibel (dB) meter used for long-term acoustic measurements. The instrument is equipped with a USB interface for download the logged data to a PCE or portable.

  • Class 2
  • Measuring range: 30 … 130 dB
  • Accuracy: ± 1.4 dB
  • Frequency: 31.5 Hz … 8 kHz
  • Frequency weighting: A and C
  • Memory: Stores up to 129,920 data sets or 36 hours at 1-sec interval
  • Includes USB interface and PC-compatible software for data transfer
  • incl. ISO Calibration Certificate

Three-Channel Current Data Logger PCE-CR 10
£ 291.00
Price excl. VAT &. delivery
The current data logger PCE-CR 10 is used to record up to three 0/4 … 20-mA signals. The current data logger saves the measured process streams on an SD card in Excel format. 

  • Measuring range: 0/4 … 20-mA
  • Resolution: 0.01-mA
  • Accuracy: ± (0.5% + 0.02-mA)
  • Memory on SD card
  • 3 measuring channels
Data Logger PCE-SM61
£ 292.00
Price excl. VAT &. delivery

The Data Logger PCE-SM61 allows you to quickly and easily query your process data via the Internet. Any device with RS485 interface can be connected to data logger. The data is retrieved via a web browser and can be carried out simultaneously by the PC, smartphone, tablet, etc., and by several users. In addition to the data query, the data logger can trigger alarms. The configuration can be done via USB or Ethernet interface.

  • up to 100 devices with 25 registers can be connected
  • Configuration via webbrowser
  • Interface: RS485, Ethernet
  • Memory: 1 GB Flash
  • additional inputs / outputs: digital input or relay output (selectable)

Vibration Data Logger PCE-VD 3-ICA incl. ISO Calibration Certificate
£ 299.00
Price excl. VAT &. delivery
ISO Calibration

PCE-VD 3-ICA is a vibration data logger that measures 3-axis shock/vibration via a built-in accelerometer sensor. This vibration data logger records 3-axis acceleration (X, Y, Z) vibration measurement data for Fast Fourier Transform (FFT) waveform analysis. The vibration data logger connects to your PC via a USB port for configuration and for quick and easy data transfer.


  • Measuring range: ±16 g per axis
  • Frequency range: 0 … 60 Hz
  • Recording interval: Adjustable from 1 sec … 24 hr
  • Logs and stores up to 168,042 records
  • Includes magnetic bracket with wall-mounting screws
  • incl. ISO Calibration Certificate

Humidity / Temperature Data Logger PCE-313A
£ 300.00
Price excl. VAT &. delivery

The PCE-313 A Data Logger measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313 A Data Logger can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Data Logger to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition. The logging meter comes manufacturer calibrated (ISO calibration certificate as an option).


  • Relative humidity: 5 … 95% r.H.
  • Temperature: 0 … 50°C / 32 … 122°F
  • Type K: -50 … 1300°C / -58 … 2372°F
  • Calculated dew point: -25.3 … 48.9°C / -13.5 … 120°F
  • Wet bulb temperature: -21 … 50°C / -5.8 … 122°F
  • Memory: SD card (1 … 16 GB)