Condition Monitoring

Order no.: PCE-779N

The Condition Monitoring Thermometer PCE-779N measures temperatures quickly and without contact. The PCE-779N can be used for almost all surfaces. The emissivity of the infrared thermometer is adjustable over the range of 0.1 ... 1.0. The infrared thermometer has various measurement functions such as max, min and average measurement.


- OLED-Display
- Measuring range: -60 ... 760°C / -76 ... 1400°F
- Additional thermocouple measurement -64 ... 1400°C / -83.2 ... 2552°F
- Dual Laser
- Resolution: 0.1°C / 0.18°F at -83.2 ... 999.9°C (-117.8 ... 1831.8°F), otherwise 1°C / 1.8°F 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VD 3

The PCE-VD 3 Vibration Meter is a miniaturized universal Vibration Meter with an included built-in three-axes acceleration sensor (X, Y, Z axis). The internal sensor of the PCE-VD 3 Vibration Meter measures acceleration force along the X, Y, and Z axes with a measurement range of ±18 g per axis. Especially made for use in machine condition monitoring.


- 3-axis vibration data logging
- Software included -USB port
- Light weight
- Stand included
- Storage capacity: 4 Mbit (85764 records)
- Magnetic wall mount

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A-ICA

The PCE-313A condition monitoring thermometer measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A condition monitoring thermometer can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the condition monitoring thermometer to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SDL 1

PCE-SDL 1 is a condition monitoring class 2 (type 2) data-logging sound level meter, sound pressure level (SPL) meter, noise meter or decibel (dB) meter used for long-term acoustic measurements.


- Measuring range: 30 ... 130 dB
- Accuracy: ± 1.4 dB
- Frequency: 31.5 Hz ... 8 kHz
- Frequency weighting: A and C
- Memory: Stores up to 129,920 data sets or 36 hours at 1-sec interval
- Includes USB interface and Windows-compatible software for data transfer to PC

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SDL 1-ICA

PCE-SDL 1 is a condition monitoring class 2 (type 2) data logging sound level meter, sound pressure level (SPL) meter, noise meter or decibel (dB) meter used for long-term acoustic measurements. The instrument is equipped with a USB interface for download the logged data to a PCE or portable.

- Class 2
- Measuring range: 30 ... 130 dB
- Accuracy: ± 1.4 dB
- Frequency: 31.5 Hz ... 8 kHz
- Frequency weighting: A and C
- Memory: Stores up to 129,920 data sets or 36 hours at 1-sec interval
- Includes USB interface and PC-compatible software for data transfer
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-USC 20

PCE-USC 20 is a portable or benchtop condition monitoring ultrasonic tester or ultrasonic thickness gauge with a 5.7" TFT color LCD screen. This ultrasound-based thickness meter uses one or two contact transducers (four different probes included; 90 °, 70 °, 60 °, 45 °) to measure material or wall thickness, detect flaws or defects in welds, and monitor the effects of corrosion on pipes and tanks.


- Measurement range: 0.5 ... 9999 mm (steel; longitudinal wave)
- Operating frequency range: 0.5 ... 20 MHz
- Sound velocity: 1000 ... 15000 m/s (continuously adjustable)
- AVG and DAC evaluation methods, display and probes delay, damping and
  reinforcing functions, export and reporting functions 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-353

PCE-353 is a condition monitoring class 2 sound level meter, sound pressure level (SPL) meter, decibel (dB) meter, noise meter or noise dose meter used for acoustic measurements. With this condition monitoring meter, you are able to measure sound exposure level (SEL) as well as equivalent continuous sound level (Leq), measurements commonly used in assessing industrial noise.


- Class 2
- Measuring range: 30 ... 130 dB
- Measurement parameters: Lp, Lmax, Leq, LN
- Resolution: 0.1 dB
- Accuracy: ±1 dB
- Frequency: 20 Hz ... 12.5 kHz
- Frequency weighting: A, C, F (Flat)
- Memory: Stores up to 30 groups with measuring conditions 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-353-ICA

The class 2 Condition Monitoring Sound Meter PCE-353 is indispensable for professionals to take measurements to determine the noise pollution at workplaces. The PCE-353 condition monitoring sound meter has the Leq function which allows measurement of integrated sound level (Leq). With an internal memory this  condition monitoring sound meter is ideal for measurements over long periods of time.


- Class 2
- Measuring range: 30 ... 130 dB
- Measurement parameters: Lp, Lmax, Leq, LN
- Resolution: 0.1 dB
- Accuracy: ±1 dB
- Frequency: 20 Hz ... 12.5 kHz
- Frequency weighting: A, C, F (Flat)
- Memory: Stores up to 30 groups with measuring conditions 
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-AT 5

The PCE-AT 5 condition monitoring rotation meter is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The PCE-AT 5 handheld automotive tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.


- Measurement range: 100 ... 20000 rpm
- Resolution: 1 rpm
- Accuracy: ± 10 rpm
- Measurement interval: 0.5 seconds

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR 80
The temperature meter PCE-IR 80 is used for quick control of the temperature of food. The temperature meter PCE-IR 80 is used in the area of ​​canteen kitchens, catering services, refrigerated warehouses and non-refrigerated warehouses. The temperature meter PCE-IR 80 has two types of measurement. On the one hand, the temperature meter PCE-IR 80 can measure the temperature of the object without contact via infrared. 

- Infrared measuring range: -35 ... 330°C / -31 ... 626°F
- Type of measurement puncture sensor measuring range: -20 ... 260°C / -4 ... 500°F
- Measurement spot ratio: 4: 1
- For frozen, cold and hot foods
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-S 40

The PCE-S 40 is a condition monitoring stethoscope which amplifies machine noises. An acoustic stethoscope makes it possible to detect noises in bearings, fan flaps, pumps and similar parts. In mechanical engineering, it is used for preventive maintenance to diagnose potential machine faults before they arise.


- Measuring tip: approx. 16.5 cm
- Earpieces made of soft plastic
- Total length: approx. 1 m
- Tight ear clips

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 50
The condition monitoring borescope PCE-VE 50 is a compact video endoscope for the visual inspection of difficult to access areas. The camera head of the condition monitoring borescope PCE-VE 50 on the semi-rigid cable transmits images directly to the LC display. 

- Camera diameter: 8 mm
- Cable length: 770 mm
- Image sensor: 1/9 ", CMOS
- Effective pixels: 640 x 480 pixels
- Interface: Video connection via 3.5 mm jack
- Protection class: IP67 (camera hose only)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT110

The PCE-HT110 Condition Monitoring Environmental Meter or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 238
The condition monitoring tachometer PCE-T 238 is a battery-powered hand-held device that allows mobile use. The condition monitoring tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The condition monitoring tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

- Continuous data output
- Contactless measurement range: 0 ... 99,999 RPM
- Contact measurement range: 0.5 ... 19,999 RPM
- Surface measurement range: 0.05 ... 1,999.9 m/min
- Measuring distance without contact: 5 ... 150 cm / 1.9" ... 4.9 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T390

The PCE-T390 Condition Monitoring Thermometer is a digital device with four input channels for type K and type J temperature sensors and two input channels for PT100 temperature sensors. The PCE-T390 Condition Monitoring Thermometer has a SD card slot (from 1 ... 16 GB) for storing the measured data. The data is stored in xls format on the SD card of the contact thermometer so that no additional software is needed for further analysis.


- 4 input channels for type-K, J temperature sensors
- 2 input channels for Pt100 temperature sensors
- 2 x type-K TF-500 temperature sensors are included in the package
- SD card memory (1 ... 16 GB)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SLM 10
The condition monitoring sound level meter PCE-SLM 10 is suitable for the continuous measurement and visualization of the sound pressure level. The condition monitoring sound level meter PCE-SLM 10 is used in schools, open-plan offices, bars, clubs and other event rooms.

- 75 mm / 3 in digit height
- 30 ... 130 dBA measuring range
- 0.1 dB or 1 dB resolution
- For offices, schools, event rooms
- Memory for 657,000 readings
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100

The condition monitoring vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this condition monitoring vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

 

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Easy to handle and battery operated
- Standard probe: 10mm

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A

The PCE-313 A Thermometer measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313 A Thermometer can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Thermometer to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition. The meter comes manufacturer calibrated (ISO or as an option).


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SLD 10
The condition monitoring device PCE-SLD 10 is used for permanent monitoring of the sound level. In addition to storing the measured values, the PCE-SLD 10 condition monitoring device is able to display the measured values ​​on a display and output them as a 4 ... 20-mA analog value.

- Measuring range: 30 ... 130 dB
- Measurement accuracy: Based on class 2 according to IEC61672
- Resolution: 0.1 dB
- LC display
- SD card memory up to 16 GB
- external microphone
- Analog output with 4 ... 20-mA
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-OM 15

PCE-OM 15 is a condition monitoring strobe rotation meter or handheld strobe tachometer with trigger functionality. This easy-to-use portable digital stroboscope gun features high / low range selection and push-button rate control to scale the flash rate slower (x½) and faster (x2). In addition, two knobs allow coarse and fine adjustment of the flash rate.


- Measuring range: 50 ... 30000 rpm
- Bright 6500K xenon light bulb
- 10 mm / 0.4 in 5-digit LCD

 

Manufacturer: PCE Instruments
Test Instruments manufacturer