PCE Instruments

Environmental Meter

Order no.: PCE-MSL 1
The Environmental Meter PCE-MSL 1 is a simple sound measuring device. The PCE-MSL 1 environmental meter is used to quickly determine the ambient noise level. In addition to the volume measurement, the PCE-MSL 1 environmental meter also has the option of determining the ambient temperature. The measurement of background noise is important in almost every situation today.
 
- Measuring range: 35...135 dB
- Frequency range: 31.5 Hz ... 8 kHz
- Accuracy: ±2 dB
- Frequency rating: A
- Class II
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322ALEQ
The environmental meter PCE-322ALEQ is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322ALEQ environmental meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation


Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 22

The waterproof environmental meter is used for fast and accurate measurement of pH and temperature. Due to the practical double display, both values can be read simultaneously on the environmental meter. The waterproof and robust housing (IP 67) means the environmental meter can be used under difficult conditions.

- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDL 16I
The environmental meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this environmental meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 4 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228HTE

The Environmental Meter PCE-228HTE is a mobile device for measuring pH, mV, °C and °F complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212°F.


- Measurement range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2 digits)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Incl. special pH electrode: for temperatures to 100°C / 212°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228HTE-ICA

The environmental meter PCE-228HTE is a mobile device for measuring pH, mV, °C and °F, complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212°F.


- Measurement range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ±(0.02 pH + 2 digits)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Incl. special pH electrode: for temperatures to 100°C / 212°F
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A-ICA

The PCE-313A environmental meter measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A environmental meter can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the environmental meter to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WL 1

The environmental meter PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the environmental meter for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The environmental meter PCE-WL1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl. 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 50
The environmental meter PCE-HT 50 is suitable for continuous monitoring of the room climate. This is how the environmental meter finds its application in homes or at work. The environmental meter has an internal sensor for air temperature and humidity. 

- Measures temperature and humidity
- With second external cable temperature sensor
- Display of date and time
- With alarm function
- Battery operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-444

PCE-444 is a combination digital hygrometer and digital thermometer used to measure air temperature, relative humidity, dew point temperature and wet bulb temperature. This portable handheld pocket-sized mini thermo-hygrometer allows for the quick and easy determination of indoor ambient environmental conditions.


- Humidity measuring range: 0 ... 100% relative humidity (RH)
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Resolution: 0.1%, °C, °F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MAM 2

PCE-MAM 2 is a lightweight portable handheld pocket-sized mini anemometer, wind speed meter or air velocity measuring device with an impeller wheel sensor that is ideal for determining air or wind speeds inside or out. This mini anemometer allows you to take velocity and temperature measurements quickly and on the spot.


- Velocity measuring range: 0.4 ... 30 m/s (0.9 ... 67 mph)
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Displays velocity measurements in m/s, km/h, mph, knots or ft/min
- Impeller wheel sensor for air or wind speed
- Colour display

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ITF 5
The PCE-ITF 5 environmental meter is used to measure the humidity, temperature and surface temperature simultaneously. This environmental meter PCE-ITF 5 is ideal for detecting heat bridges and incorrect ventilation behavior in homes, houses, etc.

- Infrared temperature : -50 ... 550°C / -58 ... 1022°F
- Air temperature: -45 ... 60°C / -49 ... 140°F
- Humidity: 0 ... 100% rh
- 12: 1 spot size ratio
- Circular laser
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PHM 12
The environmental meter PCE-PHM 12 has been specially developed for the pH measurement in aquariums. The aquarium environmental meter can be attached to any aquarium with the included universal holder. The built-in temperature probe on the aquarium environmental meter is not only used for temperature indication but also for temperature compensation.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.1 pH
- Temperature compensation up to 50°C / 122°F
- Universal mounting bracket
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR 80
The environmental meter PCE-IR 80 is used for quick control of the temperature of food. The environmental meter PCE-IR 80 is used in the area of ​​canteen kitchens, catering services, refrigerated warehouses and non-refrigerated warehouses. The environmental meter PCE-IR 80 has two types of measurement. On the one hand, the environmental meter PCE-IR 80 can measure the temperature of the object without contact via infrared. 

- Infrared measuring range: -35 ... 330°C / -31 ... 626°F
- Type of measurement puncture sensor measuring range: -20 ... 260°C / -4 ... 500°F
- Measurement spot ratio: 4: 1
- For frozen, cold and hot foods
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BDA 10
The Bluetooth Environmental meter PCE-BDA 10 is an optimal measuring device for heating and plant technicians. The Bluetooth Environmental meter is an easy-to-use meter. 

- Air flow: 1 ... 25 m / s
- Temperature: 0 ... 50°C / 32 ... 122°F
- iOS and Android app
- Bluetooth
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BTH 10
The PCE-BTH 10 is a compact and easy-to-use Bluetooth environmental meter. This Bluetooth environmental meter is characterized by its simple one-button operation and integrated interface. The Bluetooth environmental meter PCE-BTH 10 measures the air temperature and humidity.

- Measuring range temperature: -20 ... 60°C / -4 ... 140°F
- Humidity measuring range: 0.01% RH
- Dew point
- Wet bulb temperature
- Bluetooth interface
- iOS and Android compatible
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 71N

The PCE-HT 71N Environmental Meter detects air temperature and humidity and stores readings to its internal memory. This Environmental Meter is compact and has enough memory to store up to 32,000 readings, 16,000 for each parameter, and is used above all as a data logger, in supermarket refrigeration units, refrigerated transport, warehouses and other temperature controlled environments.


- Measurement range: 0 ... 100% RH / -35 ... 80°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 72
The environmental meter PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the environmental meter PCE-HT 72 to use up to several months. The PCE-HT 72 environmental meter is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

- Measuring range Temp.: -30 ... 60°C / -22 ... 140°F
- Measuring range rel. Humidity: 0 ... 100% rh
- Measurement protocol as PDF
- Data export possible as CSV
- Readable without software
- 20,010 sets of measured values can be stored
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 16
The environmental meter PCE-PH 16 is a very easy-to-use measuring device for determining the pH value in a wide variety of liquids. Using the BNC connection of the environmental meter PCE-PH 16, a wide variety of pH electrodes can also be connected to the environmental meter PCE-PH 16.

- Measuring range: 0.00 ... 14.00 pH
- Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
- Resolution: 0.01 pH
- Ideal for school facilities
- Exchangeable electrode through BNC connection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 17
The environmental meter PCE-PH 17 is a environmental meter with a pH electrode made entirely of glass. The fact that the electrode of the environmental meter is made of glass makes cleaning the electrode easier and more thorough. 

- Measuring range: 0.00 ... 14.00 pH
- Accuracy: ± 0.1 pH (at 20°C / 28°F), ± 0.2 pH
- Resolution: 0.01 pH
- Ideal for school facilities
- Exchangeable electrode through BNC connection
- Exchangeable glass electrode
Manufacturer: PCE Instruments
Test Instruments manufacturer