Description

Performance indicator for compliance with ISO 50001 / measures up to 63 A direct /

measurement and display of current, voltage, power and frequency

The power indicator measures current up to 63 A directly. This makes it possible to connect the power display directly to the main distribution. The power indicator measures all relevant network parameters such as current, voltage, power and frequency. The power indicator is ideally suited for measurement purposes in order to comply with the ISO 50001 energy management standard. The measured values can be passed via Modbus interface. Furthermore, the power indicator can be equipped with two alarm relays or an alarm relay and an analog output.

Highlights

Measures up to 63 A directly
Measuring about 1A / 5A transducer possible
Measurement of U, I, f, P
DIN rail
For compliance with the ISO 50001
Alarm relay
Measurable switchable
Modbus interface
Easy operation
OLED display
Simple configuration via software
Analog output selectable

Specification

Technical specification
Entrance	Display	Measuring range	Accuracy
U.N	5 ... 120V AC 20 ... 480V	0.01 ... 1.2 x Un	± 0.5% of measuring range.
In	1 A / 5 A 32 A / 63 A AC	0.01 ... 1.2 x In	± 0.5% of measuring range.
Voltage frequency		2 ... 500 Hz	± 0.02% of the meas.
Current frequency		45 ... 500 Hz	± 0.02% of the meas.
Wealth		-31.5 to 31.5 kW	± 1% of the measured value.
General technical specification for performance indication
Display		OLED
Digit height		8.5 mm
Color		yellow
Output (selectable)		2 Alarm relay 250 V / 500 mA AC 1 alarm relay, 1 x 4 ... 20 mA
Interface		RS485 Modbus
Dimensions		53 x 110 x 60 mm / 2 x 4.3 x 2.3 in
Display frames		45 x 53 mm / 1.7 x 2 in
mass		Approx. 250 g / 8,8 oz
Assembly		To 35 mm DIN rail
Environmental conditions		-10 ... 55 °C / 14 ... 131 °F / <95% rh
Degree of protection		CAT III 300 V / CAT II 600 V

Delivery Scope

1 x Power indicator PCE-N27P
1 x User manual