The carbon dioxide meter PCE-CMM 10 is a multi-function meter for measuring the air quality. This carbon dioxide meter measures synchronously the CO2 concentration, the air temperature and the humidity.
The carbon dioxide meter PCE-CMM 5 measures the CO2 content in the air and shows the measured value on a large LCD display. The CO2 content in the air is an important measure for checking the ventilation behavior in offices, classrooms, lecture halls, etc.
- Large CO2 measuring range up to 5000 ppm - Traffic light function for carbon dioxide - Measures temperature and humidity - 5 h graph for long-term monitoring - Battery and power adapter operation - Suitable for classrooms, nurseries/kindergartens, lecture halls
With the carbon dioxide meter you can ensure the right climate in your office. The carbon dioxide meter measures the CO2 content of the air, the relative humidity and the room temperature. The carbon dioxide meter shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.
- Large CO2 measuring range up to 9999 ppm - Traffic light function for carbon dioxide - Measures temperature and humidity - Network operation - Suitable for classrooms, offices, lecture halls
The carbon dioxide meter has a CO² measuring range of 0 ... 9999 ppm. In addition to this measurement, the carbon dioxide meter also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor.
- Carbon monoxide (CO): 0 … 1000 ppm - Carbon dioxide (CO²): 0 … 9999 ppm - Temperature: 0 … 50 °C / 32 … 122 °F - Humidity: 0 … 100% RH - Data memory for 5000 measuring points - Data export CSV - Power supply: rechargeable battery
The carbon dioxide meter is used to measure and store environmental data such as temperature, humidity, illuminance, CO2 content and TVOC concentration. The carbon dioxide meter also calculates the dew point, absolute humidity and the water vapor content in the air. The carbon dioxide meter is used for stationary monitoring of laboratories, greenhouses, medicine and food stores, museums, etc.
The Carbon Dioxide Meter PCE-RCM 16 is ideal for monitoring the air quality in homes, businesses or public buildings where people are staying. The 4.3-inch TFT display on the carbon dioxide meter is dimensioned so that all measured values can be read directly.
The carbon dioxide meter PCE-WMM 100 consists of a main unit and a remote display. The carbon dioxide meter PCE-WMM 100 is used to measure CO2 and oxygen in a fixed location. The carbon dioxide meter PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.
- Measuring range CO2: 0 .... 50000 ppm - Measuring range O2: 0 ... 30 % - Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F - Main and remote unit - Alarm relay - 4 ... 20 mA analog outputs - Acoustic alarm
PCE-WMM 50 is a wall-mounted carbon dioxide meter that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.
- CO2 gas measurement range: 0 ... 50,000 ppm - Temperature measurement range: 0 ... +45 ºC / +32 ... +113 ºF - IP54-rated enclosure on sensor and remote display units - 2 adjustable alarm thresholds - 3- to 4-digit remote display (depends on range)
Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. Intrinsically safe, the Triple Plus+ provides enhanced features for safety and detector fleet managers including:
- Selection of flammable gas correction factors (so one unit can be used in several locations across a site) - Annotation of the data file with user names and site names selected from pre-configured files in the unit
* Call to order or see accessories tab. Must specify sensors (see chart for details) and choose with / without internal pump. Charger and software sold separately.
The Xgard IR Carbon Dioxide Meter is a rugged, explosion-proof gas sensor for hydrocarbons or carbon dioxide. The Xgard IR gas detector is available in different versions, depending on which gases it is to be used for. The gas detector measures the respective gases using a dual wavelength infrared sensor.
- Various finishes available - Explosion-proof construction with ATEX approval - Infrared sensor - 3-wire 4...20 mA output
The Carbon Monoxide Meter Gasman-CO is a unique gas meter which protects against a specific gas, inflammable or toxic. The Carbon Monoxide Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Carbon Monoxide Meter fulfills all the European and international norms, even ATEX and UL standards.
- Non-rechargeable, 1-year battery - For CO (Carbon Monoxide) - Dust and water resistant - IP 65/67 - 0... 500 ppm
The carbon monoxide meter has a CO measuring range of 0 ... 1000 ppm. In addition to the carbon monoxide measurement, the meter also has a carbon dioxide (CO2) sensor with a measuring range of 0 ... 9999 ppm and a temperature and humidity sensor.
- Carbon monoxide (CO): 0 … 1000 ppm - Carbon dioxide (CO²): 0 … 9999 ppm - Temperature: 0 … 50 °C / 32 … 122 °F - Humidity: 0 … 100% RH - Data memory for 5000 measuring points - Data export CSV - Power supply: rechargeable battery
The Xgard-1-CO is a single-gas Carbon Monoxide Meter used to warn for gases (Carbon Monoxide, CO, 0 ... 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary - For (Carbon Monoxide, CO, 0 ... 250 ppm) - Additional display and alarm station - ATEX or UL approval
PCE-LD 1 is a portable handheld gas detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.
- Adjustable high/low sensitivity: 6 g/yr or 30 g/yr for R-22 and R-134a 8 g/yr or 40 g/yr for R404A, R-407C and R-410A
Charging station and interface for Gasman gas warning devices.
Used as a charging station only for all Gasman gas warning devices equipped with a rechargeable battery.
The interface is used for all Gasman N as an interface to a PC (RS-232).
Delivery
1 x charger / interface, 1 x power adapter with country adapter.
PCE-PCS 6 is a checkweighing scale or balance with accurate weighing and piece or part counting functions. Ideal for use in laboratory, office, inventory and miscellaneous industrial applications, this portable scale can be powered by battery or by the included electric power supply. The scale's built-in RS-232 port enables data transfer and printing.
- Weight range: 0.1 ... 6000 g / 6 kg (metric only) - Readability: 0.1 g - Repeatability: ± 0.1 g - TARE range: 100 % - Memory positions for reference weight: 99
The checkweighing scale is a high-precision analytical balance with a measuring range of up to 220 g. A special feature of the checkweighing scale is the large LCD touch screen. Amongst other functions, the checkweighing scale can perform piece counting, percent weighing and density determination.
The checkweighing scale is a high-precision analytical balance with a measuring range of up to 220 g. A special feature of the checkweighing scale is the large LCD touch screen. Amongst other functions, the checkweighing scale can perform piece counting, percent weighing and density determination.
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
