PCE-CPT 20 is a Adhesion Tester, or surface coating flexibility testing device, used for testing the formability, ductility, adhesion and elongation of paints, lacquers, varnishes, powder and protective coatings on sheet metal. Used in manufacturing production, paint shop and quality control applications, the Adhesion Tester aids in determining coating strength, durability and elasticity.
- Tests surface coatings on metal sheets 0.3 to 1.25 mm thick - Provides a maximum depression force of 2500 N - Offers a display resolution of 0.01 mm
The Adhesion Tester PCE-CRC 10 is designed to determine the quality of the adhesion of coatings. The Adhesion Tester is suitable for thin, thick or tough coatings on all surfaces. Since the adherence of paintings and other coatings is a crucial product and quality characteristic for their protective effect, adhesion testers are used in a wide range of industries.
- Evaluation of adhesion - For thin, thick or tough coatings - Large, non-slip grip - Various blades selectable
The simple design and an absolutely straightforward operation make it possible for the practitioner to use the adhesion tester as an instrument for daily adhesion tests. Using adhesive with rapid curing, the tests can be performed by the user in the shortest possible time.
- Breakout force: 200 kg - Diameter of base dolly, mm: 15.1 (№ 1) and 19.5 (№ 2) - Specific breakout force, MPa: Dolly №1 up to 10 MPa (100) Dolly №2 up to 6 MPa (60)
Flexible compensation cable, type K (NiCr-Ni). The compensating cable is used for the cost-effective extension of type K thermocouples. The single strands are made of PTFE and twisted.
- Ø1.2 mm - Permissible ambient temperature: -60 ... + 260 °C - Cable type: PTFE twisted - Type K thermocouples
Flexible compensation cable, type K (NiCr-Ni). The compensating cable is used for the cost-effective extension of type K thermocouples. The individual thermal strands are sheathed with fiberglass
- Ø1.5 mm - Permissible ambient temperature: -25 ... + 400 °C - Cable type: fiberglass - Type K thermocouples
Flexible compensation cable, type K (NiCr-Ni). Type K compensation cable for flexible extension of sensors. This compensating wire can also be used for installation.
- Ø7 mm - Permissible ambient temperature: -50 ... + 90 °C - Cable Type: PVC - Type K thermocouples
The Air and Temperature Meter PCE-EM 890 is an instrument for measuring environmental conditions.
Thus, this air and temperature meter is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.
The Air and Temperature Meter PCE-VA 11 is an extensively used measuring instrument. This temperature meter offers the opportunity to determine air speeds, air temperature and infrared temperature. The illuminated LCD allows comfortable readings and facilitates use in dimly lit areas.
- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph - Air flow range: 0 ... 9999 CFM / CMM - Air temperature range: -10 ... 60°C / 14 ... 140°F - IR temperature range: -50 ... 500°C / -58 ... 932°F
The Air and Temperature Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.
- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph - Air flow range: 0 ... 9999 CFM / CMM - Air temperature range: -10 ... 60°C / 14 ... 140°F - IR temperature range: -50 ... 500°C / -58 ... 932°F
- USB interface - Incl. ISO Calibration Certificate
The air flow / temperature / humidity data logger determines the wind speed via an impeller with a diameter of 65 mm. The air flow / temperature / humidity data logger can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.
- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s - Velocity and volume flow measurement - Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“ - Impeller opening of 65 mm / 2.5" - Interface: Micro USB - Data memory: 960 measured values
The air flow / temperature / humidity data logger determines the wind speed via an impeller with a diameter of 65 mm. The data logger can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.
- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s - Velocity and volume flow measurement - Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“ - Impeller opening of 65 mm / 2.5" - Interface: Micro USB - Data memory: 960 measured values - incl. ISO Calibration Certificate
The air flow / temperature data logger measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the air flow / temperature data logger can measure the volume flow and the ambient temperature.
- Measuring range: 0.3 ... 30.0 m/s / 0.98 ... 98.4 ft/s - Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1" - Probe diameter: Ø0.8 ... 1.2 mm / 0.031 x 0.047" - Data memory for 960 measured values - Wind speed - Volume flow - Temperature measurement
The air flow / temperature data logger measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the air flow / temperature data logger can measure the volume flow and the ambient temperature.
- Measuring range: 0.3 ... 30.0 m/s / 0.98 ... 98.4 ft/s - Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1" - Probe diameter: Ø0.8 ... 1.2 mm / 0.031 x 0.047" - Data memory for 960 measured values - Wind speed - Volume flow - Temperature measurement - incl. ISO Calibration Certificate (wind speed function only)
PCE-WSAC 50 is an air flow meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This air flow meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.
- Pre-alarm and full alarm with visual and audible warnings - Optional RS-485 modbus interface for data communication - Measuring range: 0 ... 50 m/s or 0 ... 110 mph - Incl. ISO calibration certificate
Air flow meter with 4 ... 20 mA output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the air flow meter is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.
- Measuring range: 0 ... 50 m/s - Output signal: 4 ... 20 mA - Mounting: Pipe mounting / mounting via PG screw connection - Heating: yes
Air flow meter with 4 ... 20 mA output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the air flow meter is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.
- Measuring range: 0 ... 50 m/s - Output signal: 4 ... 20 mA - Mounting: Pipe mounting / mounting via PG screw connection - Heating: yes
Air flow meter with 0 ... 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.
- Measuring range: 0 ... 50 m/s - Output signal: 0 ... 10 V - Mounting: Pipe mounting / mounting via PG screw connection - Heating: yes
Air flow meter with 0 ... 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.
- Measuring range: 0 ... 50 m/s - Output signal: 0 ... 10 V - Mounting: Pipe mounting / mounting via PG screw connection - Heating: yes
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
