Measuring range | |
Rockwell A B C | 61 … 85.6 HRA, 41 … 100 HRB, 20.3 … 68 HRC |
Brinell | 85 … 650 HB |
Vickers | 50 … 999 HV |
Tensile strength | 255 … 2180 N/mm² |
Accuracy | |
Rockwell | ± 1.5 HR |
Brinell | ± 3% HB |
Vickers | ± 3% HV |
General specifications | |
Measurement method | Ultrasonic contact impedance (UCI) per ASTM A1038 |
Direction of measurement | 360° |
Measurement time | 2 seconds |
Hardness units | HRA, HRB, HRC, HB, HV, MPa |
Display | LCD with backlight |
Minimum material thickness | 2 mm |
Data memory | Up
to 2000 measurement groups Up to 20 calibration sets |
Measurement probe | 20 N (standard) |
Probe cable length | 1.5 m / .06 in |
Functions | Single value, min / max, average value |
Power supply | 4.2V rechargeable battery, 4800-mAh |
Battery life | Approx. 10 hrs of operation at full charge (without backlight) |
Dimensions | 162 x 81 x 31 mm / 6.38 x 3.19 x 1.22 in |
Operating conditions | -10 ... 40°C / 14 ... 104°F, ≤ 85% RH |
Storage conditions | -20 ... 60°C / -4 ... 140°F, ≤ 85% RH |
Weight | Approx. 755 g / 1.67 lb (including probe) |
The PCE-5000-STAND test stand for the PCE-5000 hardness tester is used to support the automatic test probes. The test stand allows automated measurements, with a higher reproducibility of tubes and round material.
- Measuring stand for PCE-5000 hardness tester
- Support of automatic test probes
Automatic test probes and meter not included.
ex. VAT, ex. delivery costs
Automatic motorized test probe for the PCE-5000 hardness tester with a test force of 8N. The motorized test probe can be used in conjunction with the test rig for the hardness testing of chromium-plated or copper-coated printer rolls.
- Automatic 8N probe
- For use in the test stand or in manual operation
ex. VAT, ex. delivery costs
Automatic motorized test probe for the PCE-5000 hardness tester with a test force of 5N. The motorized test probe can be used in conjunction with the test rig for the hardness testing of chromium-plated or copper-coated printer rolls.
- Automatic 5N probe
- For use in the test stand or in manual operation
ex. VAT, ex. delivery costs
Automatic motorized test probe for the PCE-5000 hardness tester with a test force of 3N. The motorized test probe can be used in conjunction with the test rig for the hardness testing of chromium-plated or copper-coated printer rolls.
- Automatic 3N probe
- For use in the test stand or in manual operation
ex. VAT, ex. delivery costs
Automatic motorized test probe for the PCE-5000 hardness tester with a test force of 10N. The motorized test probe can be used in conjunction with the test rig for the hardness testing of chromium-plated or copper-coated printer rolls.
- Automatic 10N probe
- For use in the test stand or in manual operation
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs