Thickness Meter

Choose from a variety of thickness meter, mil gage or paint meter products used for the non-destructive measurement of nonmagnetic coating, insulating layer and dry film thickness (DFT) on ferrous and / or non-ferrous metal substrates such as steel and aluminum. Explore PCE Instruments' selection of accurate, affordable thickness meter, coating thickness gauge, surface testing and film gauge devices used for automotive paint inspection, material testing and manufacturing quality control applications.

A thickness meter is an essential quality assurance tool when anodizing, galvanizing and applying zinc coating to metallic surfaces. A thickness meter also is used to measure body paint thickness and uniformity on pre-owned cars, revealing repainted spots, identifying hidden damages and exposing undisclosed accidents. This information is important when determining the actual value of a used car. In addition, certain types of thickness gauges can measure wall thickness and determine the hardness of metals, plastics and glass.

For measuring powder coating thickness, a good rule of thumb is to use a magnetic or eddy current thickness gauge on powder-coated metal substrates. Use an ultrasonic thickness gauge on powder-coated non-metal substrates like plastic and wood.

If you have any questions, please contact us at or +1 (561) 320-9162.

Thickness Meter PCE-TG 75A

US$ 528.00

ex. VAT, ex. delivery costs

The thickness meter can measure material thicknesses of up to 225 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the thickness meter.

Measuring range: 1.00 … 225.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 500 measured values
Calibration reference on housing

Thickness Meter PCE-TG 75A-ICA incl. ISO calibration certificate

US$ 686.00

ex. VAT, ex. delivery costs

Measuring range: 1.00 … 225.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Coating Thickness Meter PCE-CT 21BT

US$ 404.00

ex. VAT, ex. delivery costs

With this Coating Thickness Meter, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Meter has a measuring range of 1500 µm. This means that the Coating Thickness Meter is used, for example, in a paint shop, for incoming goods inspection or for an expert.

- Measuring range up to 1500 µm

- Measurable substrates: Fe

- Probe: external

- Micro USB and Bluetooth interface

- Data storage for up to 600 measured values

Thickness Meter PCE-UFD 50

US$ 3,545.00

ex. VAT, ex. delivery costs

The thickness meter is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the thickness meter considerably easier.

Test range: 0 … 10000 mm
Pulse shift: -20 … +3400 µs
Single or dual probe measurement
AVG and DAC evaluation methods
Speed of sound 1000 … 15000 m/s
USB interface and software
Memory for up to 100 data records

Thickness Meter PCE-CT 80-FN0D5

US$ 913.00

ex. VAT, ex. delivery costs

The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Coating Thickness Meter PCE-CT 22BT

US$ 490.00

ex. VAT, ex. delivery costs

Measuring range up to 1500 µm
Measurable substrates: Fe, NFe
Probe: internal
Micro USB and Bluetooth interface
Data storage for up to 600 measured values

Thickness Meter PCE-CT 80-FN1D5

US$ 1,132.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Coating Thickness Meter PCE-CT 25FN

US$ 193.00

ex. VAT, ex. delivery costs

The coating thickness meter is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness meters, this coating thickness meter does not have to differentiate between ferrous and non-ferrous metal.

Measuring range: 0 … 1500 µm
Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
Measuring accuracy: ± (3% + 1 µm)
Resolution: 0.1 µm in the measuring range 0 … 100 µm 1 µm in the measuring range> 100 µm

Thickness Meter PCE-CT 26FN

US$ 272.00

ex. VAT, ex. delivery costs

The PCE-CT 26FN thickness meter can measure non-destructive coatings (paints, plastics …) on steel / iron and non-ferrous metals. The PCE-CT 26FN thickness meter is ideally suited to immediately detect, for example, accident damage to the vehicle.

Measuring range: 0 … 1250 μm / 0 … 49.2 mils
Resolution: 1 μm / 0.039 mils
Accuracy: ± (3% + 2 μm / 0.079 mils)
Wear-resistant sensor
V-groove for measurement on pipes