Thermometer PCE-780-ICA incl. ISO Calibration Certificate

Order no.: PCE-780-ICA

Question / Callback

Available in: 10 - 14 days

PCE-780-ICA Thermometer
Infrared thermometer scanner for the display of temperature, humidity and dew point temperature / Optical alarm / Backlight / Automatic shutdown / Incl. ISO Calibration Certificate

The PCE-780 consists of an infrared thermometer and an integrated humidity meter. With the two sensors, it can record values to determine the dew point. If this dew point is reached or undershot, there is a risk of moisture settling and mold growing. The dew point, which is calculated by the PCE-780, is displayed on the high-contrast LCD display. The control buttons can be used to set alarm values. If the surface temperatures are exceeded or undercut, the PCE-780 emits a warning tone and displays either a LOW or a HIGH alarm.

The PCE-780 also has a relative value measuring function. Thus, in the structural analysis, a temperature can be stored as a reference in the instrument by a measuring point. If further measurements are subsequently carried out, a good / bad evaluation by the PCE-780 is carried out via a colored bar graph. Furthermore, the PCE-780 offers the possibility to determine the maximum, minimum and average value of the infrared temperature.

- Infrared temperature measurement
- Air temperature and humidity measurement
- Calculation of dew point
- High contrast LCD display
- Adjustable high and low alarm
- Max, Min, Average measurement
- External temperature sensor can be connected
- Adjustable degree of emission
- Incl. ISO Calibration Certificate

***ATTENTION*** Our temperature sensors are designed for industrial and laboratory surface temperature measurement ONLY. They are not designed or certified for body temperature measurement or for medical use.

Measuring range	Infrared: -76 ... 932°F / -60 ... 500°C Type K thermocouple: -83 ... 2552°F / -64... 1400°C Air temperature: -4 ... 149°F / -20 ... 65°C Wet bulb temperature: -4 ... 149°F / -20 ... 65°C Dew point: -58 ... 122°F / -50 ... 50°C Humidity: 1... 99% rh
Accuracy (at 68... 78°F / 20... 26°C ambient temperature)	Infrared 59... 95°F / 15... 35°C: ± 1.0°C / 1.8°F -22 ... 932°F / -33... 500°C: ± 2% of rdg. or ± 2°C / 3.6°F Thermocouple type K ± 1% of rdg. or ± 1.0°C / 1.8°F Air temperature: ± 2.5°C / 4.5°F Wet bulb temperature: ± 2.5°C / 4.5°F Dew point 20... 30% RH: ± 2.5°C / 4.5°F 31... 40% RH: ± 2.0°C / 3.6°F 41... 95% RH: 1.5°C / 2.7°F Air humidity: 20... 80%: ± 3% Balance: ± 5%
Resolution	0.1°C / 0.18°F 1.0°C / 1.8°F
Emissivity	0.1 ... 1
Response time	1 second
Optical resolution	12: 1
Power supply	2 x 1.5V AAA battery
Battery life (without laser & display lighting)	Approx. 180 minutes Approx. 140 minutes (continuous operation)
Weight	< 1 lb / 240 g
Dimensions	1.8 x 5.6 x 7.3 in / 46 x 143 x 184.8 mm

1 x PCE-780 thermometer
1 x Type K thermocouple
2 x 1.5V AAA batteries
1 x User manual
1 x ISO Calibration Certificate

Datasheet

Accessories

ISO Calibration Certificate for Infrared Thermometer

Order no.: CAL-IR

ISO Calibration Certificate for Infrared Thermometer

ISO calibration certificate, e.g. to comply with your DIN ISO 9000. For this purpose, we give the measuring device to our in-house calibration laboratory. As the client, the measured values and the serial number are recorded in this ISO calibration certificate.

- 4 measuring points evenly distributed over the measuring range
- Calibration range: 30 ... 500 °C
- Calibration applies to infrared sensors only

N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.

Catalogue: Measuring Instruments / Test Meters / Infrared Thermometer

US$ 160.00

ex. VAT, ex. delivery costs

Order no.: TF-108

Air Sensor TF-108

Stainless steel air sensor with handle and 1 m cable for air and gases with fast response time

- Tmax.: 600 °C / 1112 °F
- Accuracy: ± 1.5 °C
- Diameter: Ø 6 mm
- Length: 130 mm
- Thermocouple Type K

Catalogue: Measuring Instruments / Test Meters / Temperature Sensor

US$ 63.00

ex. VAT, ex. delivery costs

Order no.: TF-106

Penetration / Immersion Sensor TF-106

Stainless steel penetration / immersion sensor with handle and 1m spiral cable for liquids, semi-solid media and air

- Tmax: 600 °C / 1112 °F
- Accuracy: ± 1.5 °C
- Diameter: Ø 3.0 mm
- Length: 130 mm
- Thermocouple Type K

Catalogue: Measuring Instruments / Test Meters / Temperature Sensor

US$ 66.00

ex. VAT, ex. delivery costs

Insulated Surface Temperature Sensor TF-102A

Order no.: TF-102A

Insulated Surface Temperature Sensor TF-102A

Electrically insulated probe for measuring live surfaces

- Tmax.: 200 °C / 392 °F
- Accuracy: ± 1.5 °C
- Diameter: Ø 3.5 mm
- Length: 130 mm
- Type K thermocouple

Catalogue: Measuring Instruments / Test Meters / Temperature Sensor

US$ 73.00

ex. VAT, ex. delivery costs

Order no.: TF-101

Temperature Sensor TF-101

Temperature sensor with resilient plate tip and 1m cable

- Ø3 mm
- Length: 120 mm
- Temperature Max: 450 °C / 842 °F
- Accuracy: ±1.5 °C
- Thermo couple: Type K

Catalogue: Measuring Instruments / Test Meters / Temperature Sensor

US$ 90.00

ex. VAT, ex. delivery costs

Order no.: PCE-MS 25

PCE-MS 25 Measuring Point Sticker

Measuring point stickers for pyrometers with measuring surface for E = 0.95 (25 pieces)

US$ 20.00

ex. VAT, ex. delivery costs