Moisture Meter

Order no.: PCE-WP24

PCE-WP24 is a wood moisture meter used to perform noninvasive, nondestructive moisture measurements of wood, timber and other construction or building materials. An ideal tool for assessing everything from lumber to floors and more, this moisture meter uses electromagnetic waves that penetrate approximately 50 mm / 1.96 inches to 60 mm / 2.36 inches deep (depending on substrate) to return a mean-value moisture content percentage.


- Moisture content measuring range: 4% ... 60% wood, 0% ... 10% building
  materials
- Resolution: 0.1%
- Accuracy: ±0.7%

Manufacturer: PCE Instruments
US$ 568.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PEL 20

The pellets moisture meter PCE-PEL 20 was designed in collaboration with biomass power plant operators. Since the heating value of pellets depends strongly on its moisture the pellets moisture meter ensures high efficiency. The pellets moisture Analyzer performs a resistance moisture detection.


- Measuring range from 10 to 20 %
- Resolution 0.1 %
- 1000 mm measuring sensor

Manufacturer: PCE Instruments
US$ 673.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WM1

PCE-WM1 is a multi-function air moisture meter used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.


- Temperature range: -20 ... 80°C 
- Relative humidity range: 10 ... 95% RH
- Absolute humidity range: 0.5 ... 74.4 g/m³

 

Manufacturer: PCE Instruments
US$ 741.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is a halogen moisture meter or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.1 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.01 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles
- RS-232 interface or port

Manufacturer: PCE Instruments
US$ 1,044.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DPM 3
The moisture meter PCE-DPM 3 is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This moisture meter measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar.

- Dew point, H2O, temperature, humidity measurement
- Data memory for approx. 50,000 measurement data
- CSV data export
- With G1 / 2" connection thread
- For inline measurement of pressure pipes
- Sensor protected with a cap
- Left connection has NO function
Manufacturer: PCE Instruments
US$ 1,081.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 110-ICA

PCE-MA 110 is a halogen moisture meter or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.1 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.01 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles
- RS-232 interface or port
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 1,192.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 200

The moisture meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The moisture meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g 
- Adjustable drying temperature and time
Accuracy to 0.01 %

Manufacturer: PCE Instruments
US$ 1,329.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MA 50X
The moisture meter PCE-MA 50X is an innovative solution for the fast and highly accurate determination of moisture in a wide variety of materials. The precision weighing scale uses weighing technology from the moisture meter range and is operated in combination with a drying chamber.

- Weighing range: 50 g / 0.11 lbs
- Readability: 0.1 mg = 0.0001 g / 0.0001%
- Especially for very dry samples such as ABS / PET etc.
- Drying temperature max. 160°C / 320°F
- Database with drying parameters for eg ABS, Crastin, Aramid...
- Stores the measurement data of the last 5,000 drying cycles
- Automatic chamber opens and closes without contact
- Non-contact control thanks to IR sensors
- Quickly import and export stored data using a USB flash drive
Manufacturer: PCE Instruments
US$ 1,978.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PM5

PM5 is a portable handheld paper moisture meter used to take accurate nondestructive measurements of the moisture content or water content and temperature of cardboard and paper products. Ideal for stacks and rolls of paper products and warm running rolls and stationary cold rolls. Infrared temp sensor and optional bluetooth for data transfer.


- Moisture content range: 1 ... 25%
- Temperature range: 0 ... +80 °C / +32 ... +176 °F
- Accuracy: ±1 %, ±1 °C
- Measuring depth to 50 mm
- Large internal memory stores up to 10,000 values

Manufacturer: Messtechnik Schaller GmbH
US$ 2,386.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 210

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)
- Questionnaire starts evaluation process

Manufacturer: PCE Instruments
US$ 3,885.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 230

VHF-Band Moisture Meter Crushed Stone, Gravel, Ore (conveyor). The device is resistant to corrosion (stainless steel and dielectric materials) and can operate in the conditions deviating from the norm, for example, at temperatures of 145 °C. The moisture meter probe can be mounted on the walls in the hoppers, in pipelines or on trays in conveyors. Due to pluggable design this version of the moisture meter can also be used for soil moisture control.

- Measurement range: 0 ... 100 %
- Limits of error: <0.5% below 10% moisture
- Range of working temperatures:
  0 ... +90 °C (industrial version)
  0 ... +115 °C (extended temperature range) 
  0 ... +250 °C (drying kilns)

Manufacturer: PCE Instruments
US$ 4,882.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 300P

For industrial continuous production of wood pellets, chips, sawdust and similar materials when on-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 300P moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: -40 ... +150 °C  (-40 ... +302 °F)
- Current consumption: 200 mA
- Power supply : 24 (18 ... 36) VDC
- Questionnaire starts evaluation process
- Application: pellets, wood chips

Manufacturer: PCE Instruments
US$ 5,253.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 200

The moisture meter is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture meter is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).


- Readability mass fraction of water: 0 ... 100%
- Moisture measurement range: ± 0.1 ... 100% (water mass fraction)
- Maximum permissible absolute error moisture measurement: Varies by material, lab test required
- Temperature range: +5 ... +80 °C

Manufacturer: PCE Instruments
US$ 5,308.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 240-A

Designed specifically for use in humidity measurement of bulk materials, this humidity sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output
Manufacturer: PCE Instruments
US$ 6,169.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 240-B

Suitable for determining the humidity of bulk substances, this in-process moisture meter for bulk materials can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
US$ 6,674.40

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture meter for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture meter for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Limits of permissible absolute error of the measurements: Δ= 0,035 +0,05·W
- Temperature measurement range: -40 ... +150 °C

Manufacturer: PCE Instruments
US$ 7,230.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: FMW-B

The Moisture Meter FMW-B determines moisture content by means of the capacitive method. With the Moisture Meter an electromagnetic field quickly determines capacitance of wood. This moisture meter is very easy to use as well as very robust.


- Measurement range: 2 ... 30% H2O wood / 0 ... 60% building materials
- Resolution: 0.1%
- Accuracy: ±0.5% of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement

Manufacturer: Brookhuis Applied Technologies B.V.
US$ 484.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... 60°C / 14 ... 140°F, and dew point from -55 ... 60°C / -67 ... 140°F. Affording a large graphic display and multi-language menu, the easy-to-use RH5.


- Measuring range 0...100% rH, -10 ... 60°C / 14 ... 140°F
- Offers an accuracy of ± 1.5% r.h. and ± 0.1%°C / 0.3°F
- Supplied with a 295 mm / 11.6 in aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
US$ 699.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: FMC

The Moisture Meter FMC can accurately measure absolute humidity in diverse building materials. To detect humidity, the Moisture Meter has a connection for external sensors which can either be inserted into the building material or placed on it.


- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 %
- Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials

Manufacturer: Brookhuis Applied Technologies B.V.
US$ 724.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: FME

FME is a handheld multifunction moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%

Manufacturer: Brookhuis Applied Technologies B.V.
US$ 847.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer