Gas Detector / Gas Detection Instrument

Order no.: TCgard-CO2

Single-Gas Gas Detector warning for gases (for Carbon Dioxide CO2), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).


- Stationary
- For Carbon Dioxide CO2
- Additional display and alarm station
- ATEX approved

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,510.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: Xgard-1-PH3

The Xgard-1-PH3 is a single-gas Gassensor used to warn for gases (Phosphine, PH3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,514.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TXgard-IS+O3

The TXgard-IS+O3 is a single-gas Gas detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,741.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TXgard-IS+PH3

The TXgard-IS+PH3 is a single-gas Gas detector used to warn for gases (Phosphine, PH3, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Phosphine, PH3, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,741.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TXgard-Plus-O2

The TXgard-Plus-O2 is a single-gas Gas detector used to warn for gases  (Oxygen, O2, 0 ... 25 % vol), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Oxygen, O2, 0 ... 25 % vol)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 1,928.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: TXgard-Plus-H2S

The TXgard-Plus-H2S is a single-gas Gas detector used to warn for gases (Hydrogen Sulfide, H2S, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Hydrogen Sulfide, H2S, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
US$ 2,026.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-200

Gas Detector AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Battery operation
- Different sensor heads can be selected!

 

Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
US$ 494.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-200 Set EOZ

Gas Detector AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)

 

Manufacturer: Aeroqual
US$ 988.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-200 Set OZU

Gas Detector AQ-200 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)

 

Manufacturer: Aeroqual
US$ 1,075.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-300

Gas Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Battery operation
- Alarm function

 

Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
US$ 869.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-300 Set EOZ

Gas Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)
- Alarm function

Manufacturer: Aeroqual
US$ 1,358.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-300 Set OZL

Gas Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZL included in delivery (0-0.5 ppm)
- Alarm function

Manufacturer: Aeroqual
US$ 1,359.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-300 Set OZU

Gas Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery  (Ozone 0-0.15 ppm)
- Alarm function

Manufacturer: Aeroqual
US$ 1,448.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-500

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.

- High accuracy and functionality
- Battery operation
- Alarm function
- Data logger

 

Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
US$ 1,433.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-500 Set OZL

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZL included in delivery (0-0.5 ppm)
- Alarm function
- Data logger

 

Manufacturer: Aeroqual
US$ 1,921.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-500 Set OZU

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)
- Alarm function
- Data logger

 

Manufacturer: Aeroqual
US$ 2,014.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: AQ-FM S900

The fixed gas detector base AQ-FM S900 for AQ-sensor heads can communicate with a variety of hardware systems. The transmitter can also be used as switching relays with user-set values, as 4-20 mA gas transmitter and it can communicate with a network via the RS485 interface. Changing sensor heads is quick and easy, no configuration changes required. Calibration certificate included. Wall mounting kit.


- Analog Output: 4-20 mA (optional isolated), 10... 30V
- External control signal: Min Max. Alarm, control and diagnostics
- Power supply: 12V DC 1A power supply is required but not supplied
- Interface: RS485


Attention! No AQ sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
US$ 309.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer