Environmental Tester

An electrostatic measurement is particularly important to check whether surfaces, components or the human body are electrostatically charged. Such electrostatic charges can be detected with the environmental tester.

• Measuring range: ±60 kV DC
• Acoustic signal when the measured value is exceeded
• Temperature and humidity display
• Laser for aligning the measuring device

The temperature / humidity environmental tester is a data logger has a memory of 20,010 sets of measurements and allows use of up to several months. The temperature / humidity environmental tester is particularly suitable for measuring tasks where it is not possible for the user to install software for reading the measured values.

• Measuring range temp.: -30 … 60 °C / -22 … 140 °F
• Measuring range rel. humidity: 0 … 100% RH
• Measurement protocol as PDF
• Data export possible as CSV
• Readable without software
• 20,010 sets of measured values can be stored
• incl. ISO Calibration Certificate

The PCE-228 environmental tester is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface.

• Measuring range: 0.00 … 14.00 pH
• Resolution: 0.01 pH
• Accuracy: ± (0.02 pH + 2d)
• Memory: flexible via SD card memory 1 … 16 GB
• Interface: RS-232

The Environmental Tester PCE-228HTE is a mobile device for measuring pH, mV, °C and °F, complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212°F.

• Measurement range: 0.00 … 14.00 pH
• Resolution: 0.01 pH
• Accuracy: ± (0.02 pH + 2 digits)
• Memory: flexible via SD card memory 1 … 16 GB
• Interface: RS-232
• Incl. special pH electrode: for temperatures to 100°C / 212°F

The environmental tester PCE-228HTE is a mobile device for measuring pH, mV, °C and °F, complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212°F.

• Measurement range: 0.00 … 14.00 pH
• Resolution: 0.01 pH
• Accuracy: ±(0.02 pH + 2 digits)
• Memory: flexible via SD card memory 1 … 16 GB
• Interface: RS-232
• Incl. special pH electrode: for temperatures to 100°C / 212°F
• Incl. ISO Calibration Certificate

The PCE-228WINE environmental tester is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface.

• Measuring range: 0.00 … 14.00 pH
• Resolution: 0.01 pH
• Accuracy: ± (0.02 pH + 2d)
• Memory: flexible via SD card memory 1 … 16 GB
• Interface: RS-232
• Especially for wine, beer and other solutions with low conductivity

The environmental tester with microprocessor is a high precision 1-channel temperature gauge. The environmental tester with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.

• 1 channel temperature recorder
• Automatic shutdown
• High accuracy of ± 2 % r.H.
• Sampling rate of 2 / sec
• Memory size: 5,000 values

PCE-HVAC 2 is an environmental tester with a pitot tube. This portable environmental tester can be used to determine air speed, air pressure, air flow, differential pressure and ambient temperature. The pitot tube allows access through tiny openings to take measurements in small pipe systems and other confined spaces.

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter

The environmental tester with a pitot tube that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile environmental tester. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter
• Includes ISO calibration certificate

An environmental tester to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of environmental tester is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.

- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m³/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

PCE-VA 20 is a environmental tester for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This environmental tester features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1

The multifunction environmental tester PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the wind speed, the environmental tester measures the temperature, humidity, dew point, the wet bulb temperature and the air volume. Average wind speed values can be determined with the anemometer from the 20 preset points.

- Temperature measuring range: -15 ... 50°C / 5 ... 122°F
- Humidity range: 5 ... 95% RH
- Air speed: 0.4 ... 35 m / s
- Air flow: 0 ... 9.999 m³ / s
- Incl. ISO Calibration Certificate

The environmental tester including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This environmental tester incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• Incl. ISO Calibration Certificate