Condition Monitoring

Class 1 Data Logging SPL Meter w/GPS PCE-432-ICA incl. ISO Cal. Cert.
US$ 3,163.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-432-ICA is a class 1 data logging SPL meter that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy SPL meter is equipped with GPS functionality, allowing measured values to be assigned to a precise geographic location. The SPL meter calculates the equivalent continuous sound level Leq (LXeq).

- Measuring range: 22 ... 136 db(A)
- LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
- Frequency weighting: A, B, C and Z
- Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
- GPS receiver for location determination
- Adjustable data-recording interval from 1 s ... 24 h
- 1/1 octave band filter (optional 1/3 octave band filter upgrade)
- incl. ISO Calibration Certificate

Condition Monitoring Rotation Meter PCE-T236
US$ 197.00
ex. VAT, ex. delivery costs

PCE-T236 is a digital handheld tachometer or rotation meter for both contact and non-contact measurement. This condition monitoring tachometer measures rotation speed as well as linear or surface speed, displaying units in rpm, m/min or ft/min. A unique feature of this tachometer is that the orientation of the 5-digit LCD screen automatically rotates 180° to accommodate either contact or non-contact measurement.


- Optical laser measurement range: 5 ... 99999 rpm
- Contact measurement range: 0.05 ... 19999 rpm
- Accuracy: Less than 60000 rpm = ±0.05% fs , Greater than 60000 rpm = ±0.15%
  fs

 

Condition Monitoring Tachometer PCE-T236-ICA Incl. ISO Calibration Certificate
US$ 338.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-T236 is a digital handheld tachometer or rotation meter for both contact and non-contact measurement. This condition monitoring tachometer measures rotation speed as well as linear or surface speed, displaying units in rpm, m/min or ft/min. A unique feature of this tachometer is that the orientation of the 5-digit LCD screen automatically rotates 180° to accommodate either contact or non-contact measurement.


- Optical laser measurement range: 5 ... 99999 rpm
- Contact measurement range: 0.05 ... 19999 rpm
- Accuracy: Less than 60000 rpm = ±0.05% fs , Greater than 60000 rpm = ±0.15% fs
- Incl. ISO calibration certificate

 

Condition Monitoring Infrared Thermometer PCE-890U
US$ 380.00
ex. VAT, ex. delivery costs

With the PCE-890U Condition Monitoring Infrared Thermometer, measurements of surface temperatures can be carried out quickly and easily. Since the infrared thermometer uses infrared radiation for temperature measurement, no direct contact with the measuring object is required. The infrared thermometer makes it easy to measure objects from a distance that are difficult to access.

 

- Measuring range: -50 ... 1150 °C / -58 ... 2102 °F
- Accuracy: ± 1.5% ± 2 °C / 3.6 °F (0 ... 500 °C / 32 ... 932 °F)
- Resolution: 0.1°C / 0.18°F (<1000 °C / 1832 °F)
- Emission level: 0.1 ... 1

Condition Monitoring Infrared Thermometer PCE-779N
US$ 251.00
ex. VAT, ex. delivery costs

The Condition Monitoring Thermometer PCE-779N measures temperatures quickly and without contact. The infrared thermometer can be used for almost all surfaces. The emissivity of the infrared thermometer is adjustable over the range of 0.1 ... 1.0. The infrared thermometer has various measurement functions such as max, min and average measurement.


- OLED-Display
- Measuring range: -60 ... 760°C / -76 ... 1400°F
- Additional thermocouple measurement -64 ... 1400°C / -83.2 ... 2552°F
- Dual Laser
- Resolution: 0.1°C / 0.18°F at -83.2 ... 999.9°C (-117.8 ... 1831.8°F), otherwise 1°C / 1.8°F

Condition Monitoring Vibration Meter PCE-VM 22
US$ 3,545.00
ex. VAT, ex. delivery costs
The condition monitoring vibration meter has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the condition monitoring vibration meter can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Acceleration
- Velocity
- Displacement
- Frequency
- Tachometer    
- Infrared temperature measurement   
- 4 GB data memory
- FFT analysis and wave view of the vibration
Condition Monitoring Vibration Meter PCE-VM 22-ICA incl ISO Calibration Cert.
US$ 3,758.00
ex. VAT, ex. delivery costs
ISO Calibration
The condition monitoring vibration meter has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the condition monitoring vibration meter can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Acceleration
- Velocity
- Displacement
- Frequency
- Tachometer    
- Infrared temperature measurement   
- 4 GB data memory
- FFT analysis and wave view of the vibration
- incl. ISO Calibration Certificate
Condition Monitoring Vibration Meter PCE-VD 3
US$ 206.00
ex. VAT, ex. delivery costs

The PCE-VD 3 Vibration Meter is a miniaturized universal Vibration Meter with an included built-in three-axes acceleration sensor (X, Y, Z axis). The internal sensor of the PCE-VD 3 Vibration Meter measures acceleration force along the X, Y, and Z axes with a measurement range of ±16 g per axis. Especially made for use in machine condition monitoring.


- 3-axis vibration data logging
- Software included -USB port
- Light weight
- Stand included
- Storage capacity: 8 Mbit (168042 records)
- Magnetic wall mount

 

Accelerometer PCE-VDR 10-ICA incl. ISO Calibration Certificate
US$ 1,262.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-VDR 10-ICA is a single-axis accelerometer or vibration recorder with real-time measurement and data logging capabilities. This accelerometer records acceleration (m/s, g, ft/s) as well as velocity (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory. There is also an analog output, which makes this accelerometer compatible with control systems.

- Acceleration measuring range: 
  0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Velocity measuring ranges: 
  0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface
- incl. ISO Calibration Certificate

Data Logging Condition Monitoring Device PCE-NDL 10
US$ 970.00
ex. VAT, ex. delivery costs

The data logging condition monitoring device is used to determine volume. The PCE-NDL 10 data logging condition monitoring device is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data logging condition monitoring device has an SD card slot that enables the use of an SD card as an additional storage medium.


- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement

Condition Monitoring Sound Level Meter PCE-SLT
US$ 726.00
ex. VAT, ex. delivery costs

The condition monitoring sound level meter is a class 2 (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. The condition monitoring sound level meter is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. Powered by AC current.


- Measuring range: 30 ... 130 dB in 3 ranges
- Resolution: 0.1 dB
- Accuracy: ±1.5 dB
- Class 2 and frequency weighting: A
- Output: 4 ... 20-mA and alarm relay output of 5 A / up to 240V AC
- IP 54 ingress protection rating on transmitter
- Includes digital indicator with IP 65 rating

Condition Monitoring Sound Level Meter PCE-SLT-ICA incl. ISO Calibration Cert.
US$ 857.00
ex. VAT, ex. delivery costs
ISO Calibration
The condition monitoring sound level meter meter consists of a measuring microphone with handle and a wall bracket with 1.5 m / 4.9 ft cable, a noise transmitter and a digital display. The main field of application of the noise measuring device is the continuous noise measurement and noise monitoring of factory buildings, production areas and major events such as night clubs, music festivals or karting tracks.

- Range : 30 ... 130dB (A)
- Resolution: 0.1dB
- Accuracy: ± 1.5dB
- Alarm relay: 5A / 240VAC
- Supply: 250V / 50Hz
- Handle and wall mount
- Analogue output signal
- Incl. ISO calibration certificate
Condition Monitoring Sound Level Meter with Sound Calibrator PCE-SLT-KIT-N
US$ 791.00
ex. VAT, ex. delivery costs
The condition monitoring sound level meter consists of a measuring microphone with a handle and a wall bracket on a 1.5 m / 4.9 ft cable, a noise transmitter and a digital display. The main area of application of the condition monitoring sound level meter is the continuous noise measurement and noise monitoring of factory halls, production rooms and at major events (discos, folk festivals, kart tracks, etc.).

- Measuring range: 30...130dB(A)
- Resolution: 0.1 dB
- Accuracy: ±1.5 dB
- Alarm relay: 5A/up to 240VAC
- Input.: 110V or 220V/50Hz or 60HZ
- Including class II sound calibrator
Condition Monitoring Sound Level Meter PCE-SLT-TRM
US$ 449.00
ex. VAT, ex. delivery costs

The class 2 (type 2) condition monitoring sound level meter is a noise meter, sound pressure level (SPL), or decibel (dB) meter with an audible or visual alarm. Used for long-term measurement of occupational noise exposure limits, the condition monitoring sound level meter is an effective device across the industry spectrum. 


- Class 2
- Measuring range: 30 ... 130 dB in 3 ranges
- Resolution: 0.1 dB
- Accuracy: ±1.5 dB
- Frequency weighting: A
- Time weighting: Fast
- Output: 4 ... 20 mA
- IP 54 ingress protection rating on transmitter

Condition Monitoring Thermometer PCE-313A-ICA incl. ISO Calibration Certificate
US$ 594.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-313A condition monitoring thermometer measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A condition monitoring thermometer can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the condition monitoring thermometer to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)
- Incl. ISO Calibration Certificate

Paint Viscosity Tester PCE-RVI 8
US$ 2,705.00
ex. VAT, ex. delivery costs
The paint viscosity tester has a measuring range of 27…. 5250 cp and an accuracy of +1% of the measuring range. The paint viscosity tester is used, for example, in quality control of production processes. In addition, the paint viscosity tester is particularly used in laboratories of all kinds.

- Measuring range: 27 ... 5250 cp
- Rotation speed: 200 RPM
- Volume measuring cup: 600 ml
- Large touch screen for easy operation
- Temperature measuring range: -20 ... 250 °C / -4 ... 482 °F
Condition Monitoring Sound Level Meter PCE-SLT-TRM-ICA incl ISO calibration cert
US$ 565.00
ex. VAT, ex. delivery costs
ISO Calibration
The condition monitoring sound level meter consists of a microphone with handle, a wall bracket with 1.5 m / 4.9 ft cable, and a sound transmitter. The main application area of this sound level meter lies in continuous noise monitoring of factory sites, production lines, as well as in major events such as auto racing and festivals. 

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Relay output and control output
- Handle and wall holder
- Analog output signal
- Incl. ISO calibration
Condition Monitoring Class 2 Sound Level Data Logger PCE-SDL 1
US$ 286.00
ex. VAT, ex. delivery costs

PCE-SDL 1 is a condition monitoring class 2 (type 2) data-logging sound level meter, sound pressure level (SPL) meter, noise meter or decibel (dB) meter used for long-term acoustic measurements.


- Measuring range: 30 ... 130 dB
- Accuracy: ± 1.4 dB
- Frequency: 31.5 Hz ... 8 kHz
- Frequency weighting: A and C
- Memory: Stores up to 129,920 data sets or 36 hours at 1-sec interval
- Includes USB interface and Windows-compatible software for data transfer to PC