Condition Monitoring

Condition Monitoring Stroboscope PCE-DSX 100
US$ 156.00
ex. VAT, ex. delivery costs
The condition monitoring is a handy device for measuring the rotational speed of objects with a measuring range of 60 to 20,000 rpm. The condition monitoring is suitable for inspecting objects with periodic movements and for detecting faults.

- Measuring range: 60 ... 20000 RPM
- Coarse adjustment: +10, +100 RPM
- Fine adjustment: +0.1, +1 RPM
- Accuracy: 0.05 %
- 2.1" LC display with illumination
- Data storage function up to 10 values
Manifold PCE-HVAC 10
US$ 315.00
ex. VAT, ex. delivery costs
The manifold is a robust measuring instrument designed for daily use in refrigeration systems and heat pumps to determine pressure and temperature. Measurement with the manifold is carried out using supplied refrigerant hoses and 2 NTC clamp-on temperature sensors. The 83 preloaded refrigerants can be quickly selected and are visible on the measurement screen.

- Measurement Range: -1 ... +60 bar
- Resolution: 0.01 bar
- Accuracy: ±0.5% F.S. (Full Scale)
- 83 refrigerants stored in the device
- 2-way valve block with 3 connectors 7/16" – UNF
- Includes 2 NTC clamp-on temperature sensors
- Temperature measurement -10 ... +200 °C
Condition Monitoring Stroboscope PCE-DSX 100-ICA incl. ISO-calibrartion-certificate
US$ 342.00
ex. VAT, ex. delivery costs
ISO Calibration
The condition monitoring is a handy device for measuring the rotational speed of objects with a measuring range of 60 to 20,000 rpm. The condition monitoring is suitable for inspecting objects with periodic movements and for detecting faults.

- Measuring range: 60 ... 20000 RPM
- Coarse adjustment: +10, +100 RPM
- Fine adjustment: +0.1, +1 RPM
- Accuracy: 0.05 %
- 2.1" LC display with illumination
- Data storage function up to 10 values
incl. ISO-calibrartion-certificate
Condition Monitoring Vibration Meter PCE-VT 1100S
US$ 376.00
ex. VAT, ex. delivery costs

 

The condition monitoring vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this condition monitoring vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

 

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Portable and battery operated
- Needle probe: 45mm / 1.77"

Fixed Mount Infrared Thermometer PCE-IR10
US$ 567.00
ex. VAT, ex. delivery costs

Infrared Thermometer with LCD for continuous measurement of surface temperature of all solid materials, designed for fixed installation.


- Temperature range: -40 ... 600 °C / -40 ... 1112 °F
- Accuracy: ± 1% or ± 1°C / 1.8°F
- Optical resolution: 15:1
- Storage conditions: -40 ... 85°C / -40 ... 185°F
- Spectral range: 8.0 ... 14 µm
- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001
- Outputs: analogue, USB, RS-232, RS-485, relay

Condition Monitoring Vibration Meter PCE-VT 1100S-ICA incl. Certificate
US$ 615.00
ex. VAT, ex. delivery costs
ISO Calibration
The condition monitoring vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this condition monitoring vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.


- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Portable and battery operated
- Needle probe: 45mm / 1.77"
incl. ISO Calibration Certificate
Condition Monitoring Human Vibration Meter with Hand-Arm Sensor PCE-VM 31-HA
US$ 4,600.00
ex. VAT, ex. delivery costs

The PCE-VM 31-HA Condition Monitoring Human Vibration Meter is designed for measuring human vibration at the workplace. The Condition Monitoring Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold separately (see
  accessories)

 

Condition Monitoring Human Vibration Meter with Whole-Body Sensor PCE-VM 31-WB
US$ 4,877.00
ex. VAT, ex. delivery costs

The PCE-VM 31-WB Condition Monitoring Human Vibration Meter or Analyzer is designed for measuring human vibration at the workplace. The Condition Monitoring Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes whole-body sensor only - hand-arm sensor sold separately (see   
  accessories)

 

Condition Monitoring Vibration Meter Hand-Arm, Whole-Body Sensors PCE-VM 31-HAWB
US$ 6,730.00
ex. VAT, ex. delivery costs

The PCE-VM 31-HAWB Condition Monitoring Human Vibration Meter is designed for measuring human vibration at the workplace. The Condition Monitoring Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Meter that captures acceleration, velocity, and displacement measurements.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support

 

Condition Monitoring Sound Level Meter PCE-428-Kit-N with Sound Calibrator
US$ 1,617.00
ex. VAT, ex. delivery costs
The condition monitoring sound level meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The condition monitoring sound level meter is a class 2 device and is equipped with an octave band frequency filter. The sound level meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Including class II sound calibrator
Condition Monitoring Sound Level Meter PCE-428-Kit-N-ICA + Calibrator + Cal Cert
US$ 1,847.00
ex. VAT, ex. delivery costs
ISO Calibration
The condition monitoring sound level meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The condition monitoring sound level meter is a class 2 device and is equipped with an octave band frequency filter. The condition monitoring sound level meter can optionally be upgraded with a 1/3 octave band filter.

- Accuracy class 2
- 1/1 octave band included
- 1/3 octave band optional
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- Including class II sound calibrator
- Including calibration certificate for sound level meter
- Including calibration certificate for sound calibrator
Outdoor Condition Monitoring Sound Level Meter PCE-428-EKIT
US$ 5,379.00
ex. VAT, ex. delivery costs

The class 2 outdoor condition monitoring sound level meter PCE-428-EKIT, from the field of environmental measurement technology, is an optimal condition monitoring sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The outdoor condition monitoring sound level meter is equipped with an octave band frequency filter. Optionally, the outdoor sound level meter PCE-428-EKIT can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with a sound level meter over a long period of time, even in the rain.

 

- Accuracy class 2 
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- incl. outdoor noise level meter kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise

Outdoor Condition Monitoring Sound Level Meter PCE-428-EKIT-ICA inc ISO Cal Cert
US$ 5,478.00
ex. VAT, ex. delivery costs
ISO Calibration

The class 2 outdoor condition monitoring sound level meter PCE-428-EKIT-ICA, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The outdoor condition monitoring sound level meter is equipped with an octave band frequency filter. Optionally, the outdoor condition monitoring sound level meter can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with a sound level meter over a long period of time, even in the rain.

 

- Accuracy class 2 
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- incl. outdoor noise level meter kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise
- incl. ISO calibration certificate

Condition Monitoring Sound Level Meter PCE-322A
US$ 251.00
ex. VAT, ex. delivery costs
Topseller

The condition monitoring sound level meter is a handheld, portable, professional Class II sound pressure level (SPL) meter or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, the condition monitoring sound level meter is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.


- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option

Condition Monitoring Sound Level Meter with Calibrator PCE-322-SC43
US$ 351.00
ex. VAT, ex. delivery costs
The condition monitoring sound level meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The condition monitoring sound level meter has a logger function, which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II
Condition Monitoring Tachometer PCE-T237
US$ 125.00
ex. VAT, ex. delivery costs

The condition monitoring tachometer can be used contactless or with mechanical contact. The PCE-T237 condition monitoring tachometer is particularly suitable for recording rotational speeds and speeds on rotating machines and systems (on conveyor belts, motors, belt drives, etc.).


- Contact measurement of rpm via cone adapter
- Contact measurement of m / min via surface wheel
- Robust ABS plastic housing
- Meter count: 0.1 ... 199,999 m

 

Condition Monitoring Sound Level Meter PCE-322A-ICA incl calibration certificate
US$ 391.00
ex. VAT, ex. delivery costs
ISO Calibration

The condition monitoring sound level meter is a handheld, portable, professional Class II noise meter, sound meter or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, the condition monitoring sound level meter is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.


- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option
- Incl. calibration certificate

Condition Monitoring Tachometer PCE-T 260
US$ 500.00
ex. VAT, ex. delivery costs
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the condition monitoring tachometer-stroboscope also has the option of removing the rotational contacts and measuring temperatures.

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared