Ordering Hotline

Call to Order
 Ordering hotline

Monday - Friday
9:00 a.m. - 5:00 p.m. ET

(561) 320-9162

Technical Support

Technical advice

Monday - Friday
9:00 a.m. - 5:00 p.m. ET

(561) 320-9162

  1. You are here:
  2. Home
  3. Measuring Instruments
  4. Anemometer
  5. Anemometer PCE-WSAC 50W 24-ICA Incl. ISO Calibration Certificate

Anemometer PCE-WSAC 50W 24-ICA Incl. ISO Calibration Certificate

Order no.: PCE-WSAC 50W 24-ICA
ISO Calibration
US$ 1,742.00
PCE-WSAC 50W 24-ICA
ex. VAT, ex. delivery costs
Available in: 10 - 14 days
 PCE-WSAC 50W 24-ICA Anemometer incl. ISO calibration certificate
Radio Wind Warning System / Wind Monitoring on Construction Cranes / 4 ... 20-mA analog output / Power supply 110 ... 230V AC or +24V DC 

The anemometer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The anemometer PCE-WSAC 50W is equipped with alarm relay for a pre-alarm or main alarm. 

Due to the high measuring range of up to 50 m / s of the anemometer, stormy gusts can also be monitored. The radio range of the anemometer is in the open field up to 750 m / 2500 ft in the free frequency band of 2.4 GHz. When installing the display of the wind alarm PCE-WSAC 50W in buildings, a range of up to 60 m / 200 ft can be achieved for the wind sensor. Due to the integrated 4 ... 20-mA analogue output of the wind alarm display, the measured data can also be transferred to other controllers for evaluation.

- Robust plastic housing
- Units: km / h, mph, m / s
- 4 ... 20-mA analog output
- 128 x 64 pixel LC display
- Alarm relay
- Measuring range up to 180 km / h
- Durable stainless steel ball bearings
- Ambient temperature -20 ... 70°C /  -4 ... 158°F
- Radio transmission
- Incl. ISO calibration certificate
Display of anemometer PCE-WSAC 50W 24
EntrancePulse, analog (4 ... 20-mA) or radio
RadioIEEE 802.15.4 ISM 2.4 GHz
Units km / h, mph, m / s
Power supply for sensors+15V DC
Analog output4 ... 20-mA
Maximum input impedance 500 Ω
Resolution of the analog output10 bits
Accuracy of the analog output± 1.5%
Alarm relayMax. 250V AC, 8 A
Display Backlit 128 x 64 pixel LC display
CasingRobust plastic housing
Protection classIP65
Dimensions145 x 95 x 125 mm / 5.7 x 3.7 x 4.9 in
Weight 650 g / 1.4 lbs
   
Sensor of anemometer PCE-WSAC 50W
Measuring range 4 ... 180 km / h
Minimum start speed 8 km / h
Accuracy ± 1 km / h in the range 4 ... 15 km / h
  ± 3% in the range 16 ... 180 km / h
Power supply Battery mono cell D 1.5V DC
Power consumption Approx. 0.3 W with 1.5V DC power supply
Housing material PA + FG
Ball-bearing Stainless steel X65Cr13
Holder Stainless steel AISI 304
Weight (with standard bracket) About 680 g / 1.5 lbs
Weight with self-leveling bracket About 900 g / 2 lbs
Dimensions 320 x 110 x 100 mm / 12.6 x 4.3 x 3.9 in
Storage temperature -35 ... 70°C / -31 ... 158°F
Ambient temperature -20 ... 70°C / -4 ... 158°F
Protection IP65
   


1 x Display of anemometer PCE-WSAC 50W 24-ICA
1 x Wind sensor of the anemometer
1 x Self-leveling additional bracket
1 x Radio antenna
1 x Battery Monocell D 1.5V DC
1 x User manual
1 x ISO calibration certificate


Accessories

Order no.: PCE-WS V
Air Flow Meter PCE-WS V No-Shopping
The Air Flow Meter impresses with its compact design and various output signals. The air flow meter can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output: 0 ... 10 V
- IP 65 protection 
- mA, V, pulse or Modbus output
Catalogue: Measuring Instruments / Test Meters / Airflow Meter
US$ 218.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WS RS485
Air Flow Meter PCE-WS RS485
The Air Flow Meter impresses with its compact design and various output signals. The air flow meter can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output: Modbus RTU
- IP 65 protection 
- mA, V, pulse or Modbus output
Catalogue: Measuring Instruments / Test Meters / Airflow Meter
US$ 548.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WS P
Air Flow Meter PCE-WS P
The Air Flow Meter impresses with its compact design and various output signals. The air flow meter can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output: pulses (reed contact)
- IP 65 protection 
- mA, V, pulse or Modbus output
Catalogue: Measuring Instruments / Test Meters / Airflow Meter
US$ 152.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WS A
Air Flow Meter PCE-WS A
The Air Flow Meter impresses with its compact design and various output signals. The Air Flow Meter can be used for applications in warning technology, building automation and home technology. 

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output:  4 ... 20 mA (passive)
- IP 65 protection 
- mA, V, pulse or Modbus output
Catalogue: Measuring Instruments / Test Meters / Airflow Meter
US$ 218.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSAC 50-SC05
Sensor cable PCE-WSAC 50-SC05 (5 m / 16 ft)
5 m / 16 ft sensor cable to connect the wind sensors PCE-FST-200-201 to the wind detector PCE-WSAC 50. 

- 5 m / 16 ft sensor cable
- M12 coupling sensor side
- M12 connector on the device side
Catalogue: Measuring Instruments / Test Meters / Wind Speed Alarm / Wind Alarm Controller
US$ 131.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSAC 50-SC15
Sensor cable PCE-WSAC 50-SC15 (15 m / 49 ft)
15 m / 49 ft sensor cable to connect the wind sensors PCE-FST-200-201 to the wind detector PCE-WSAC 50.

- 15 m / 49 ft sensor cable
- M12 coupling sensor side
- M12 connector on the device side
Catalogue: Measuring Instruments / Test Meters / Wind Speed Alarm / Wind Alarm Controller
US$ 154.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSAC 50-SC50
Sensor cable PCE-WSAC 50-SC50 (50 m / 164 ft)
50 m / 164 ft sensor cable to connect the wind sensors PCE-FST-200-201 to the wind detector PCE-WSAC 50. 

 

- 50 m / 164 ft sensor cable
- M12 coupling sensor side
- M12 connector on the device side

Catalogue: Measuring Instruments / Test Meters / Wind Speed Alarm / Wind Alarm Controller
US$ 197.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-FST-200-201-I
Wind Speed Alarm / Wind Alarm Controller PCE-FST-200-201-I

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.


- Output signal: 4 … 20-mA
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

 

Catalogue: Measuring Instruments / Test Meters / Wind Speed Alarm / Wind Alarm Controller
US$ 249.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSAC 50-SC25
Sensor cable PCE-WSAC 50-SC25 (25m)
25 m Sensor cable for connecting the wind sensors PCE-FST-200-201 to the wind sensor PCE-WSAC 50.

- 25 m sensor cable
- M12 coupling on the sensor side
- M12 connector on the device side
US$ 145.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer