Laboratory Technology

US$ 3,023.00

ex. VAT, ex. delivery costs

The paint testing equipment is used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

Measures the whiteness degree of blue light (Wb = R457)
Meets ISO 2470 and ISO 3688 standards
Compact, lightweight and user-friendly
Resolution: 0.1
Repeat accuracy : ±0.1

Paint Roughness Tester PCE-RT 1200-ICA Incl. ISO Calibration Cert.

US$ 3,041.00

ex. VAT, ex. delivery costs

The Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
Induction method with Diamond sensor
Accuracy < ± 10% and Repeatability < 6%
Saves up to 20 Data points
Micro-USB interface
Built-in rechargeable li-ion battery
Incl. ISO calibration certificate

Paint Roughness Tester PCE-RT 2300

US$ 3,079.00

ex. VAT, ex. delivery costs

The roughness tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 roughness tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

Large measuring range: Rz: 0.02 μm … 320 μm; Ra, Rq: 0.005 μm … 32 μm
Accuracy of ± 10% and repeat accuracy of ± 6%
Touchscreen configuration and Android/printer bluetooth connectivity
Sensor has diamond test head with 90-degree cone angle
Optional sensors and extension rod for small holes and curved surfaces

Air Sampler PCE-CPC 50

US$ 3,091.00

ex. VAT, ex. delivery costs

The state-of-the-art air samplerenables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the air sampler is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Dust Monitor PCE-CPC 50

US$ 3,091.00

ex. VAT, ex. delivery costs

The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the dust monitor is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Paint Roughness Tester PCE-RT 2000BT-ICA incl. ISO Calibration Certificate

US$ 3,123.00

ex. VAT, ex. delivery costs

The roughness tester PCE-RT 2000BT-ICA is used for accurate measurement of surface roughness. The roughness tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
Measurement accuracy: <± 10%
Micro USB interface
Bluetooth
3 different cut-off wavelengths
Download free app from the Google Play Store
incl. ISO Calibration Certificate

Paint Roughness Tester PCE-RT 2200-ICA Incl. ISO Calibration Certificate

US$ 3,168.00

ex. VAT, ex. delivery costs

The portable and easy-to-use roughness tester with an OLED display is particularly suitable for quick and accurate measurements in the workshop or laboratory. The roughness tester uses a DSP chip for control and data processing at high speed and low energy consumption.

21 measurement parameters: Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc, Rmax, Ry (JIS), Rz (JIS), RP (ASME), Rpm (ASME), Rv (ASME), R3z, R3zmax, Rz1max, Rmr (c), Rdc, Rmr
Large graphic OLED display
Memory: 20 measurement histories with all parameters
USB interface
Incl. ISO calibration certificate

Paint Test Equipment PCE-CSM 1-ICA incl. ISO-Calibration Certificate

US$ 3,170.00

ex. VAT, ex. delivery costs

The Paint Test Equipment PCE-CSM 1 was developed for quality control and offers a very high accuracy. When using the Paint Test Equipment, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the Paint Test Equipment, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference values easily. 6 mm aperture for sample scanning.

CIE L*a*b*C*h, L*a*b* and XYZ
Automatic white and black calibration
8°/d geometry diffused illumination integrating sphere system
Rechargable Li-ion battery
incl. ISO-Calibration Certificate

Paint Gloss Tester PCE-IGM 100

US$ 3,211.00

ex. VAT, ex. delivery costs

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.

Measuring geometries: 20° / 60° / 85°
Measuring range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU
Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
Light source: D65
Wave length: 400-700 nm