pH Electrode for pH Meter PE-21
US$ 108.00
ex. VAT, ex. delivery costs
Features Professional and heavy-duty pH electrode for industrial use, available for on-site pH monitoring.

  • Professional pH electrode
  • Measuring range: 0 ... 14 pH
  • Diameter: 26.5 mm
  • Temperature range: 0 ... 95 °C
  • Shaft / sensor material: PPS
  • Connection: BNC
  • Application: Water treatment, aquariums etc.
Automotive Tester / Car Battery Tester PCE-CBA 20
US$ 107.00
ex. VAT, ex. delivery costs
No-Shopping

The Automotive Tester tests 12V and 24V starter batteries. The vehicle battery tester checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling. 

  • Measurement object:  12V / 24V starter batteries

  • Battery standards: DIN, JIS, EN, SAE

  • Power supply: 9 … 35V DC via test voltage

Car Measuring Device / Car Battery Tester PCE-CBA 20
US$ 107.00
ex. VAT, ex. delivery costs
No-Shopping

The Car Measuring Device tests 12V and 24V starter batteries. The vehicle battery tester checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling. 

  • Measurement object:  12V / 24V starter batteries

  • Battery standards: DIN, JIS, EN, SAE

  • Power supply: 9 … 35V DC via test voltage

Electrical Tester PCE-CBA 20
US$ 107.00
ex. VAT, ex. delivery costs
No-Shopping

The Electrical Tester tests 12V and 24V starter batteries. The vehicle battery tester checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling. 

  • Measurement object:  12V / 24V starter batteries

  • Battery standards: DIN, JIS, EN, SAE

  • Power supply: 9 … 35V DC via test voltage

Voltmeter PCE-CBA 20
US$ 107.00
ex. VAT, ex. delivery costs
No-Shopping

The Voltmeter tests 12V and 24V starter batteries. The voltmeter checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling. 

  • Measurement object:  12V / 24V starter batteries

  • Battery standards: DIN, JIS, EN, SAE

  • Power supply: 9 … 35V DC via test voltage

Clamp Meter PCE-CM 7
US$ 106.00
ex. VAT, ex. delivery costs
The Clamp Meter is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Clamp Meter is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

  • direct voltage: 0.1 mV ... 1000 V
  • alternating voltage: 0.1 mV ... 750 V
  • direct current: 0.1 A ... 1000 A
  • alternating current: 0.1 ... 1000 A
  • resistance: 0.1 Ω ... 60 MΩ
  • capacitance: 1 nF ... 100 mF
  • frequency: 0 Hz ... 10 MHz
  • temperature sensor: -20 ... +1000 °C
  • non-contact voltage detection (NCV)
  • automatic and manual measurement range selection
Clamp on Tester PCE-CM 7
US$ 106.00
ex. VAT, ex. delivery costs
The Clamp on Tester is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Clamp on Tester is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

  • direct voltage: 0.1 mV ... 1000 V
  • alternating voltage: 0.1 mV ... 750 V
  • direct current: 0.1 A ... 1000 A
  • alternating current: 0.1 ... 1000 A
  • resistance: 0.1 Ω ... 60 MΩ
  • capacitance: 1 nF ... 100 mF
  • frequency: 0 Hz ... 10 MHz
  • temperature sensor: -20 ... +1000 °C
  • non-contact voltage detection (NCV)
  • automatic and manual measurement range selection
Current Clamp PCE-CM 7
US$ 106.00
ex. VAT, ex. delivery costs
The Current Clamp is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Current Clamp is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

  • direct voltage: 0.1 mV ... 1000 V
  • alternating voltage: 0.1 mV ... 750 V
  • direct current: 0.1 A ... 1000 A
  • alternating current: 0.1 ... 1000 A
  • resistance: 0.1 Ω ... 60 MΩ
  • capacitance: 1 nF ... 100 mF
  • frequency: 0 Hz ... 10 MHz
  • temperature sensor: -20 ... +1000 °C
  • non-contact voltage detection (NCV)
  • automatic and manual measurement range selection
Digital Multimeter PCE-CM 7
US$ 106.00
ex. VAT, ex. delivery costs
The Digital Multimeter is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Digital Multimeter is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

  • direct voltage: 0.1 mV ... 1000 V
  • alternating voltage: 0.1 mV ... 750 V
  • direct current: 0.1 A ... 1000 A
  • alternating current: 0.1 ... 1000 A
  • resistance: 0.1 Ω ... 60 MΩ
  • capacitance: 1 nF ... 100 mF
  • frequency: 0 Hz ... 10 MHz
  • temperature sensor: -20 ... +1000 °C
  • non-contact voltage detection (NCV)
  • automatic and manual measurement range selection