PCE-IVE 300 is an automotive tester or video borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the automotive tester captures both picture and video and saves the files to an SD card memory (included).

• Telescopic pole extends up to 1 m / 3.3 ft
• Gooseneck camera head diameter of 28 mm / 1.11 in
• Waterproof and dustproof IP68 ingress protection rating

PCE-IVE 300 is a car measuring device or video borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the car measuring device captures both picture and video and saves the files to an SD card memory (included).

• Telescopic pole extends up to 1 m / 3.3 ft
• Gooseneck camera head diameter of 28 mm / 1.11 in
• Waterproof and dustproof IP68 ingress protection rating

PCE-IVE 300 is an industrial endoscope or borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the endoscope camera captures both picture and video and saves the files to an SD card memory (included).

• Telescopic pole extends up to 1 m (3.28')
• Gooseneck camera head diameter of 28 mm (1.11")
• Waterproof and dustproof IP68 ingress protection rating

PCE-IVE 300 is a HVAC meter or video borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the HVAC meter captures both picture and video and saves the files to an SD card memory (included).

• Telescopic pole extends up to 1 m / 3.3 ft
• Gooseneck camera head diameter of 28 mm / 1.11 in
• Waterproof and dustproof IP68 ingress protection rating

PCE-IVE 300 is an industrial borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28 ft) in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the borescope camera captures both picture and video and saves the files to an SD card memory (included).

• Telescopic pole extends up to 1 m / 3.3 ft
• Gooseneck camera head diameter of 28 mm / 1.11 in
• Waterproof and dustproof IP68 ingress protection rating

PCE-IVE 300 is a borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the borescope camera captures both picture and video and saves the files to an SD card memory (included).

• Telescopic pole extends up to 1 m / 3.3 ft
• Gooseneck camera head diameter of 28 mm / 1.11 in
• Waterproof and dustproof IP68 ingress protection rating

PCE-IVE 300 is an NDT test instrument or video borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the NDT test instrument captures both picture and video and saves the files to an SD card memory (included).

• Telescopic pole extends up to 1 m / 3.3 ft
• Gooseneck camera head diameter of 28 mm / 1.11 in
• Waterproof and dustproof IP68 ingress protection rating

PCE-IVE 300 is a snake camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the snake camera captures both picture and video and saves the files to an SD card memory (included).

• Telescopic pole extends up to 1 m / 3.3 ft
• Gooseneck camera head diameter of 28 mm / 1.11 in
• Waterproof and dustproof IP68 ingress protection rating

PCE-IVE 300 is a surface testing - inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the surface testing - inspection camera captures both picture and video and saves the files to an SD card memory (included).

• Telescopic pole extends up to 1 m / 3.3 ft
• Gooseneck camera head diameter of 28 mm / 1.11 in
• Waterproof and dustproof IP68 ingress protection rating

PCE-IVE 300 is a videoscope or video borescope inspection camera that comes with a rigid telescoping pole that extends up to 1 m (3.28') in length. Ideal for inspecting gutters, chimneys and structures as well as for inspecting parts and under vehicles, the borescope camera captures both picture and video and saves the files to an SD card memory (included).

• Telescopic pole extends up to 1 m / 3.3 ft
• Gooseneck camera head diameter of 28 mm / 1.11 in
• Waterproof and dustproof IP68 ingress protection rating

The Electromagnetic Field Meter is used in the laboratory and quality assurance to measure the strength of magnetic fields. The Electromagnetic Field Meter is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

• Tabletop device with 2 sensors

              General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

              Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

• For static and changing magnetic fields

• Highly accurate Transverse Hall sensor

• Different units selectable  (mG / µT)

• Data storage on SD memory card

  - Incl. ISO calibration certificate

The gauss meter PCE-MFM 4000 is used in the laboratory and quality assurance to measure the strength of magnetic fields. The gauss meter is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

• Tabletop device with 2 sensors

              General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

              Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

• For static and changing magnetic fields

• Highly accurate Transverse Hall sensor

• Different units selectable  (mG / µT)

• Data storage on SD memory card

  - Incl. ISO calibration certificate

The magnetometer is used in the laboratory and quality assurance to measure the strength of magnetic fields. The magnetometer is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

• Tabletop device with 2 sensors

              General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

              Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

• For static and changing magnetic fields

• Highly accurate Transverse Hall sensor

• Different units selectable  (mG / µT)

• Data storage on SD memory card

  - Incl. ISO calibration certificate

The Electromagnetic Radiation Detector is used in the laboratory and quality assurance to measure the strength of magnetic fields. The Electromagnetic Radiation Detector is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

• Tabletop device with 2 sensors

              General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

              Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

• For static and changing magnetic fields

• Highly accurate Transverse Hall sensor

• Different units selectable  (mG / µT)

• Data storage on SD memory card

  - Incl. ISO calibration certificate

The radioactivity meter is used in the laboratory and quality assurance to measure the strength of magnetic fields. The radioactivity meter is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

• Tabletop device with 2 sensors

              General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

              Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

• For static and changing magnetic fields

• Highly accurate Transverse Hall sensor

• Different units selectable  (mG / µT)

• Data storage on SD memory card

  - Incl. ISO calibration certificate