Query results | PCE Instruments

US$ 1,280.00

ex. VAT, ex. delivery costs

The car measuring device can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the car measuring device covers a wide range of measuring tasks.

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads

Gas Detector Xgard Type 1 CL2

US$ 1,276.31

ex. VAT, ex. delivery costs

The Xgard-1-CL2 is a single-gas sas detector used to warn for gases (Chlorine, CL₂, 0 … 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

Stationary
For (Chlorine, CL₂, 0 … 5 ppm)
Additional display and alarm station
ATEX or UL approval

Gas Leak Detector Xgard Type 1 CL2

US$ 1,276.31

ex. VAT, ex. delivery costs

The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL₂, 0 … 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

Stationary
For (Chlorine, CL₂, 0 … 5 ppm)
Additional display and alarm station
ATEX or UL approval

Force Gage PCE-DFG N 500-ICA incl. ISO Calibration Certificate

US$ 1,275.00

ex. VAT, ex. delivery costs

Digital Force Gage PCE-DFG N 500-ICA for tensile force measurement and pressure force measurement up to 500 N. The digital force gage is for precise measurements with a resolution of 0.1 N.

Measuring range: 0 … 500 N
Accuracy: ± 0.1% of the measuring range
Memory for 100 measurements
Pull and pressure force measurement
1600 Hz sampling rate
Interface: USB
6 different measuring tips
Incl. ISO calibration certificate

Force Gauge PCE-DFG N 500-ICA incl. ISO Calibration Certificate

US$ 1,275.00

ex. VAT, ex. delivery costs

Digital force gauge PCE-DFG N 500-ICA for tensile force measurement and pressure force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

Measuring range: 0 … 500 N
Accuracy: ± 0.1% of the measuring range
Memory for 100 measurements
Pull and pressure force measurement
1600 Hz sampling rate
Interface: USB
6 different measuring tips
Incl. ISO calibration certificate

Color Matching Cabinet / Color Matching PCE-CIC 5-LED

US$ 1,268.00

ex. VAT, ex. delivery costs

A Color Matching Cabinet / Color Matching enables the user to make direct visual colour comparisons of products that are to be produced or are already in production. Colour comparisons in a Color Matching Cabinet / Color Matching are important for a company that aims to offer products of high and consistent quality.
Colour assessment with 4 different illuminants

daylight
standard light
store light
domestic light
LED light
meets ASTM D1729 standards

Color Viewing Box PCE-CIC 5-LED

US$ 1,268.00

ex. VAT, ex. delivery costs

A Color Viewing Box enables the user to make direct visual colour comparisons of products that are to be produced or are already in production. Colour comparisons in a Color Viewing Box are important for a company that aims to offer products of high and consistent quality.
Colour assessment with 4 different illuminants

daylight
standard light
store light
domestic light
LED light
meets ASTM D1729 standards

Force Gage PCE-DFG 500 X-ICA incl. ISO-Calibration Certificate

US$ 1,268.00

ex. VAT, ex. delivery costs

The Force Gage records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

Measuring range: 0 ... 500 N
Resolution: 0.1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 500 X-ICA incl. ISO-Calibration Certificate

US$ 1,268.00

ex. VAT, ex. delivery costs

The Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

Measuring range: 0 ... 500 N
Resolution: 0.1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Tensile Tester PCE-DFG 500 X-ICA incl. ISO-Calibration Certificate

US$ 1,268.00

ex. VAT, ex. delivery costs

The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

Measuring range: 0 ... 500 N
Resolution: 0.1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Tension Dynamometer / Tension Load Cell PCE-DFG 500 X-ICA incl. ISO-Calibration Certificate

US$ 1,268.00

ex. VAT, ex. delivery costs

The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

Measuring range: 0 ... 500 N
Resolution: 0.1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Coating Thickness Gauge PCE-CT 80HP-FN1D5

US$ 1,267.00

ex. VAT, ex. delivery costs

The automotive tester can reliably determine the thickness High Accuracy

of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the automotive tester covers a wide range of measuring tasks.

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
Practical V-groove on the measuring heads

1-Phase Power Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 1-phase power meter is used to measure the current of 1- or 3-phase loads. This 1-phase power meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the power meter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Clamp Meter PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 clamp meter is used to measure the current of 1- or 3-phase loads. This clamp meter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp meter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Clamp on Tester PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 clamp on tester is used to measure the current of 1- or 3-phase loads. This clamp on tester is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the clamp on tester.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Current Clamp PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 Current Clamp is used to measure the current of 1- or 3-phase loads. This Current Clamp is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the Current Clamp.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Digital Multimeter PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate

Electrical Tester PCE-GPA 50-ICA incl. ISO Calibration Certificate

US$ 1,264.00

ex. VAT, ex. delivery costs

The PCE-GPA 50 electrical tester is used to measure the current of 1- or 3-phase loads. This electrical tester is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the electrical tester.

Measurement functions

AC voltage AC V
AC AC
Power factor (PF)
Phase angle
Frequency
Active, reactive and apparent power
Harmonic AC V
AC
Harmonic AC V%
Absolute harmonic distortion
Temperature type K thermocouple
incl. ISO Calibration Certificate