1. You are here:
  2. Home
  3. Query results
1-Phase-Power Meter PCE-PA6000-ICA incl. ISO Calibration Certificate
1-Phase-Power Meter PCE-PA6000-ICA incl. ISO Calibration Certificate
US$ 1,161.00
ex. VAT, ex. delivery costs
ISO Calibration

The 1-Phase-Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.


  • Performance
  • Power factor
  • AC voltage and current
  • DC voltage and current, resistance and frequency
  • Incl. Data Cable and Test Leads
  • Software available in the accessories tab
  • Incl. ISO Calibration Certificate

Details
Automotive Tester PCE-CT 80-FN2D5
Automotive Tester PCE-CT 80-FN2D5
US$ 1,161.00
ex. VAT, ex. delivery costs
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Cable Detector PCE-MO 2005
Cable Detector PCE-MO 2005
US$ 1,161.00
ex. VAT, ex. delivery costs
The Cable Detector with a measurement range from 0 µΩ to 6000 Ω precisely measures the smallest resistances and is used to check critical connections in electronics and electrical engineering. The Cable Detector offers 6 selectable measurement ranges, uses the 4-wire measuring method and can measure both resistance and inductance.

  • measurement range: 0 µΩ to 6000 Ω
  • resolution: 1 µΩ
  • accuracy: ± 0.25 % of Rd + 25 digits
  • test current: 10 A, 1 A, 100 mA, 10 mA, 1 mA
  • pass/fail display
  • calculation of the cable length
Details
Cable Locator PCE-MO 2005
Cable Locator PCE-MO 2005
US$ 1,161.00
ex. VAT, ex. delivery costs
The Cable Locator with a measurement range from 0 µΩ to 6000 Ω precisely measures the smallest resistances and is used to check critical connections in electronics and electrical engineering. The Cable Locator offers 6 selectable measurement ranges, uses the 4-wire measuring method and can measure both resistance and inductance.

  • measurement range: 0 µΩ to 6000 Ω
  • resolution: 1 µΩ
  • accuracy: ± 0.25 % of Rd + 25 digits
  • test current: 10 A, 1 A, 100 mA, 10 mA, 1 mA
  • pass/fail display
  • calculation of the cable length
Details
Car Measuring Device PCE-CT 80-FN2D5
Car Measuring Device PCE-CT 80-FN2D5
US$ 1,161.00
ex. VAT, ex. delivery costs
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Coating Thickness Gauge PCE-CT 80-FN2D5
Coating Thickness Gauge PCE-CT 80-FN2D5
US$ 1,161.00
ex. VAT, ex. delivery costs
The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Material Tester PCE-CT 80-FN2D5
Material Tester PCE-CT 80-FN2D5
US$ 1,161.00
ex. VAT, ex. delivery costs
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Material Thickness Meter PCE-CT 80-FN2D5
Material Thickness Meter PCE-CT 80-FN2D5
US$ 1,161.00
ex. VAT, ex. delivery costs
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Milliohmmeter PCE-MO 2005
Milliohmmeter PCE-MO 2005
US$ 1,161.00
ex. VAT, ex. delivery costs
The Milliohmmeter with a measurement range from 0 µΩ to 6000 Ω precisely measures the smallest resistances and is used to check critical connections in electronics and electrical engineering. The Milliohmmeter offers 6 selectable measurement ranges, uses the 4-wire measuring method and can measure both resistance and inductance.

  • measurement range: 0 µΩ to 6000 Ω
  • resolution: 1 µΩ
  • accuracy: ± 0.25 % of Rd + 25 digits
  • test current: 10 A, 1 A, 100 mA, 10 mA, 1 mA
  • pass/fail display
  • calculation of the cable length
Details