- Measuring range: ± 13.8 kPa / ± 2 psi / ± 0.14 bar
- Measurement accuracy: ± 0.006 psi (0 ... 0.2 psi)
- Resolution: 6.9 Pa / 0.001 psi / 0.000069 bar
- Android and iOS app
- Bluetooth interface
- 11 different units

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface

The digital multimeter PCE-DC 50-ICA is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the digital multimeter can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
- incl. ISO Calibration Certificate

Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement

- Temperature range from -50 ... 1850°C / -58 ... 3362°F
- Adjustable emissivity
- Short response time of 150 ms
- With thermocouple input
- Bluetooth interface

PCE-CT 100 is a dry film thickness measuring instrument used to quickly and easily determine coating thicknesses on ferrous (Fe) and non-ferrous (nFe) metals. This compact handheld coating thickness gauge uses magnetic induction (ISO 2178) and eddy current (ISO 2360) coating thickness measurement methods to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum.

- Measuring range: Depends on choice of sensor probe - sold separately
- Resolution: 0.1 μm or < 0.2% of measured value
- Saves up to 100,000 measurements to memory
- Interfaces: USB 2.0, Bluetooth 4.0
- Displays measuring units in μm, mm or mils

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface

The electrical tester PCE-DC 50-ICA is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the electrical tester can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
- incl. ISO Calibration Certificate

Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement

With the environmental meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental meter. The environmental meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function

With the environmental meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental meter. The environmental meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function
- incl. sinter filter

- Air flow: 1 ... 25 m / s
- Temperature: 0 ... 50°C / 32 ... 122°F
- iOS and Android app
- Bluetooth

- Measuring range: ± 13.8 kPa / ± 2 psi / ± 0.14 bar
- Measurement accuracy: ± 0.006 psi (0 ... 0.2 psi)
- Resolution: 6.9 Pa / 0.001 psi / 0.000069 bar
- Android and iOS app
- Bluetooth interface
- 11 different units

With the table-top environmental meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the environmental meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

- pH measuring range: -2.000 ... +19.999 pH
- Resolution: 0.1 / 0.01 pH
- Measuring range mV: -1999.9 ... +1999.9 mV
- Resolution: 1 mV
- Temperature measuring range: -10 ... +110 °C / 14 ... 230 °F
- Resolution: 0.1 °C
- USB and Bluetooth interface
- Memory for 300 measured values
- Live viewing software
- 3 point calibration

With the environmental meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the environmental meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

- pH measuring range: -2.000 ... +19.999 pH
- Resolution: 0.1 / 0.01 pH
- Measuring range mV: -1999.9 ... +1999.9 mV
- Resolution: 1 mV
- Temperature measuring range: -10 ... +110 °C / 14 ... 230 °F
- Resolution: 0.1 °C
- USB and Bluetooth interface
- Memory for 300 measured values
- Live viewing software
- 3 point calibration
- incl. ISO Calibration Certificate

The environmental meter can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the environmental meter.

Measuring range:
- pH, mV, TDS
- Temperature, conductivity
- Salinity, resistance
- Large 7" touchscreen
- Bluetooth and USB interfaces
- 3 point calibration

The table-top environmental meter can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the environmental meter.

Measuring range:
- pH, mV, TDS
- Temperature, conductivity
- Salinity, resistance
- Large 7" touchscreen
- Bluetooth and USB interfaces
- 3 point calibration
- incl. ISO Calibration Certificate (for PH value only)

With the environmental tester it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental tester. The environmental tester can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function

With the environmental tester it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental tester. The environmental tester can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function
- incl. sinter filter

- Air flow: 1 ... 25 m / s
- Temperature: 0 ... 50°C / 32 ... 122°F
- iOS and Android app
- Bluetooth