Clamp-on Tester PCE-PCM 3
US$ 303.00
ex. VAT, ex. delivery costs
With the clamp-on tester AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the clamp-on tester. 

Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement
Climate Meter PCE-555BT
US$ 144.00
ex. VAT, ex. delivery costs
With the climate meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the climate meter. The climate meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function
Climate Meter PCE-555BTS
US$ 182.00
ex. VAT, ex. delivery costs
With the climate meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the climate meter. The climate meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function
- incl. sinter filter
Climate Meter PCE-HWA 20BT
US$ 297.00
ex. VAT, ex. delivery costs
The climate meter has a measuring range of 0 ... 30 m / s. In addition to the air flow, the climate meter can also measure the ambient temperature between -20 ... 60°C / -4 ... 140°F and the ambient humidity between 0 ... 100% RH.

- Wind speed measuring range: 0.00 ... 30.00 m / s
- Temperature measuring range: -20 ... 60°C / -4 ... 140° F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm
- 390 mm / 15.4 in telescopic pole
- Bluetooth 4.0 interface
Climate Meter PCE-THT 10
US$ 298.00
ex. VAT, ex. delivery costs
The climate meter has a temperature measuring range of -20 ... 60 °C and a humidity measuring range of 0 ... 99.9% RH. The readings from the climate meter can be read directly on the 2.3" color display.

Temperature measurement
- Measuring range: -20 ... 60 °C / -4 ... 140 °F
Humidity measurement
- Measuring range: 0 ... 99.9% RH
- Data memory for 12800 measuring points
- For mounting on the wall
- WiFi interface
Closing Force Measuring Device BIA 600 BT for rail vehicle doors, sliding steps
US$ 5,947.00
ex. VAT, ex. delivery costs
ISO Calibration
The closing force measuring device is a wireless, electronic measuring device for rail vehicle doors and sliding steps. The closing force measuring device is a further development of the tried and tested BIA 600 measuring device.

- Measuring range: 0 ... 700 N
- Accuracy: +/- 3 N (0-100 N), +/- 3 % (>100 N)
- User guidance and evaluation according to EN 14752:2015,
   EN 14752:2005 (optional)

- Interface: Bluetooth
- App downloadable from Google Play Store
- incl. ISO calibration certificate
Closing Force Measuring Device FM100-BT for Doors and Gates
US$ 1,650.00
ex. VAT, ex. delivery costs
ISO Calibration
The closing force measuring device is a wireless, electronic measuring device for externally powered doors and gates. Typical use is the final inspection of new systems as well as regular inspections.

- Measuring range: 0 ... 2000 N
- Stiffness: 500 N/mm
- Accuracy: +/- 3N or 3% of reading
- Wireless
- App Force Meter available for download
- PC evaluation software PinchPilot
User guidance and evaluation according to:
- ASR 1.7
- DIN EN 12453:2017
- DIN EN 16005:2012
- DIN 18650-1:2010
- DHF-TS-011:2018
- 2006/42/EC Machinery Directive
- incl. ISO calibration certificate

Closing Force Transducer BIA-1 BT for Bus and Train Doors and Sliding Steps
US$ 4,422.00
ex. VAT, ex. delivery costs
ISO Calibration Topseller
The BIA-1 BT closing force transducer is a wireless, electronic closing force measuring device for rail vehicle and bus doors and sliding steps. The closing force transducer is a further development of the tried and tested closing force measuring device Original BIA Class 1.

- Measuring range: 25 ... 310 N
- Stiffness: 10 N/mm
- Accuracy: +/- 3N or 3% of reading
- PC evaluation software PinchPilot
- Force Meter App (downloadable from Google Play Store)
-Wireless
Norms:
-EN14752:2005
- VDV 111
- VDV 157
- 2001/85/EC
- § 35 E, paragraph 5 StVZO

- ISO calibration certificate
Closing Force Transducer FM300 BT for elevator doors, machine protection devices
US$ 2,097.48
ex. VAT, ex. delivery costs
ISO Calibration
The closing force transducer is a wireless, electronic closing force measuring device for automatic elevator doors and machine protection devices. The closing force transducer is a further development of the tried and tested FM 300 closing force measuring device.

- Measuring range: 0 ... 750 N
- Stiffness: 25 N/mm
- Accuracy: +/- 3N or 3% of reading
- Memory for 100 measurements
- App downloadable in Google Play Store
- Bluetooth interface
- Wireless
- Standards - EN 81-1, EN 81-2, EN 81-20:2014, EN 81-50:2015, EN 14120
- incl. ISO calibration certificate
Coating Thickness Gauge PCE-CT 100N
US$ 2,019.00
ex. VAT, ex. delivery costs
The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
Coating Thickness Gauge PCE-CT 21BT
US$ 395.00
ex. VAT, ex. delivery costs

With this Coating Thickness Gauge, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Gauge has a measuring range of 1500 µm. This means that the Coating Thickness Gauge is used, for example, in a paint shop, for incoming goods inspection or for an expert.


- Measuring range up to 1500 µm
- Measurable substrates: Fe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

Coating Thickness Gauge PCE-CT 22BT
US$ 480.00
ex. VAT, ex. delivery costs

With this coating thickness gauge, layer thicknesses on metallic surfaces can be reliably determined. The coating thickness gauge has a measuring range of 1500 µm. This means that the coating thickness gauge is used, for example, in a paint shop, for incoming goods inspection or for an expert.


- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

Coating Thickness Measuring Device PCE-CT 21BT
US$ 395.00
ex. VAT, ex. delivery costs
With this Coating Thickness Measuring Device, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Measuring Device has a measuring range of 1500 µm. This means that the Coating Thickness Measuring Device is used, for example, in a paint shop, for incoming goods inspection or for an expert.

- Measuring range up to 1500 µm
- Measurable substrates: Fe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

Coating Thickness Measuring Device PCE-CT 22BT
US$ 480.00
ex. VAT, ex. delivery costs
With this Coating Thickness Measuring Device, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Measuring Device has a measuring range of 1500 µm. This means that the Coating Thickness Measuring Device is used, for example, in a paint shop, for incoming goods inspection or for an expert.

- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
Coating Thickness Meter PCE-CT 21BT
US$ 395.00
ex. VAT, ex. delivery costs

With this Coating Thickness Meter, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Meter has a measuring range of 1500 µm. This means that the Coating Thickness Meter is used, for example, in a paint shop, for incoming goods inspection or for an expert.


- Measuring range up to 1500 µm
- Measurable substrates: Fe
- Probe: external
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

Coating Thickness Meter PCE-CT 22BT
US$ 480.00
ex. VAT, ex. delivery costs
With this Coating Thickness Meter, layer thicknesses on metallic surfaces can be reliably determined. The Coating Thickness Meter has a measuring range of 1500 µm. This means that the Coating Thickness Meter is used, for example, in a paint shop, for incoming goods inspection or for an expert.

- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
Color Meter PCE-CSM 20
US$ 6,963.00
ex. VAT, ex. delivery costs
PCE-CSM 20 is a handheld color meter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the color meter offers a long battery life, 4-color lamp and an easy-to-use portable design. The color meter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
Color Meter PCE-CSM 21
US$ 5,979.00
ex. VAT, ex. delivery costs
PCE-CSM 21 is a handheld color meter used for high-quality color measurement. Featuring a custom 4 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the color meter offers a long battery life, a 9-color lamp and an easy-to-use portable design. The color meter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- Bluetooth 4.0 and USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Light sources: D65, A, C, D50, D55, D75, F2, F7, F11
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB