Technical Support

Technical advice

Monday - Friday
9 am - 5 pm ET

(561) 320-9162

2 Years Warrenty 2 Years Warrenty

2-Year Warranty

All PCE-Brand Devices Include a 2-Year Warranty Against Manufacturer Defects

  1. You are here:
  2. Home
  3. Products for 'Vibration Meter PCE VMS 504 '
Vibration Meter PCE-VT 1100S
US$ 376.00
ex. VAT, ex. delivery costs
The vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration
  • Portable and battery operated
  • Needle probe: 45 mm / 1.77 in
Details
Vibration Meter PCE-VT 1100
US$ 376.00
ex. VAT, ex. delivery costs
The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

  • Frequency range: 10 Hz … 1 kHz
  • Holds the reading after each measurement
  • Easy to handle and battery operated
  • Standard probe: 10 mm
Details
Vibration Meter PCE-VDL 16I
US$ 329.00
ex. VAT, ex. delivery costs
The vibration meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this vibration meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Temperature, Humidity, Air pressure,
  Vibration, and Light
Details
Vibration Analyzer PCE-VT 1100
US$ 376.00
ex. VAT, ex. delivery costs

The vibration analyzer is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration analyzer, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units
  • Holds the reading after each measurement
  • Easy to handle and battery operated
  • Standard probe: 10mm

Details
Condition Monitoring Vibration Meter PCE-VT 1100
US$ 376.00
ex. VAT, ex. delivery costs

The condition monitoring vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units
  • Holds the reading after each measurement
  • Easy to handle and battery operated
  • Standard probe: 10mm
Details
Vibration Analyzer PCE-VT 1100S
US$ 376.00
ex. VAT, ex. delivery costs
The vibration analyzer is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration analyzer is used for rapid measurement of imbalance and for checking bearing and gear conditions.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units
  • Holds the reading after each measurement
  • Portable and battery operated
  • Needle probe: 45mm / 1.77"

Details
Condition Monitoring Vibration Meter PCE-VT 1100S
US$ 376.00
ex. VAT, ex. delivery costs
The condition monitoring vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this condition monitoring vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units
  • Holds the reading after each measurement
  • Portable and battery operated
  • Needle probe: 45mm / 1.77"

Details
Condition Monitoring Vibration Meter PCE-VDL 16I
US$ 329.00
ex. VAT, ex. delivery costs
The vibration meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this vibration meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light

Details
Vibration Analyzer PCE-VDL 16I
US$ 329.00
ex. VAT, ex. delivery costs
The vibration analyzer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this vibration analyzer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light
Details
Vibration Recorder PCE-VDL 16I
US$ 329.00
ex. VAT, ex. delivery costs
The vibration recorder PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this vibration recorder is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light

Details
Vibration Test Instrument PCE-VT 1100
US$ 376.00
ex. VAT, ex. delivery costs

The vibration test instrument is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration test instrument, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units only
  • Holds the reading after each measurement
  • Easy to handle and battery operated
  • Standard probe: 10 mm

Details
Vibration Test Instrument PCE-VT 1100S
US$ 376.00
ex. VAT, ex. delivery costs
The vibration test instrument is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration test instrument is used for rapid measurement of imbalance and for checking bearing and gear conditions.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration
  • Holds the reading after each measurement in metric units
  • Portable and battery operated
  • Needle probe: 45 mm / 1.77 in
Details
HVAC Meter PCE-VT 1100
US$ 376.00
ex. VAT, ex. delivery costs

The HVAC Meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this HVAC Meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units
  • Holds the reading after each measurement
  • Easy to handle and battery operated
  • Standard probe: 10mm

Details
Food Thermometer PCE-VDL 16I
US$ 329.00
ex. VAT, ex. delivery costs
The Food Thermometer PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this Food Thermometer is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light

Details
HVAC Meter PCE-VT 1100S
US$ 376.00
ex. VAT, ex. delivery costs
The HVAC meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this HVAC meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units
  • Holds the reading after each measurement
  • Portable and battery operated
  • Needle probe: 45mm / 1.77"

Details
Environmental Meter PCE-VDL 16I
US$ 329.00
ex. VAT, ex. delivery costs
The environmental meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this environmental meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light

Details
Lux Meter PCE-VDL 16I
US$ 329.00
ex. VAT, ex. delivery costs
The lux meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this lux meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- Light Measuring range: 0.045 … 188,000 Lux
- Resolution: 0.045 Lux
- 32 GB SD memory card
- Evaluation software
- Temperature, Humidity, Air pressure, Vibration
- 3-Axis acceleration up to 800 Hz

Details
Temperature Meter PCE-VDL 16I
US$ 329.00
ex. VAT, ex. delivery costs
The temperature meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this temperature meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
- Temperature, Humidity, Air pressure, Vibration, and Light

Details