Material Tester PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
US$ 1,835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-P5EE is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth
  • incl. ISO calibration certificate

Material Thickness Meter PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
US$ 1,835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-P5EE is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth
  • incl. ISO calibration certificate

IoT Meter PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
US$ 1,835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-P5EE is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth
  • incl. ISO calibration certificate

Thickness Gauge PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
US$ 1,835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-P5EE is a thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. Wall thicknesses under a coating can also be measured with the thickness gauge.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth
  • incl. ISO calibration certificate

Ultrasonic Thickness Tester PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
US$ 1,835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-P5EE is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth
  • incl. ISO calibration certificate

Paint Thickness Tester PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
US$ 1,835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-P5EE is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth
  • incl. ISO calibration certificate

Thickness Meter PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
US$ 1,835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-P5EE is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth
  • incl. ISO calibration certificate

Condition Monitoring Device PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
US$ 1,835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-P5EE is a condition monitoring device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring device. Wall thicknesses under a coating can also be measured with the condition monitoring device.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth
  • incl. ISO calibration certificate

NDT Test Instrument PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
US$ 1,835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-P5EE is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth
  • incl. ISO calibration certificate

Ultrasonic Thickness Gauge PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
US$ 1,835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-P5EE is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth
  • incl. ISO calibration certificate

Wall Thickness Meter PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
US$ 1,835.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-TG 300-P5EE is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the wall thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

  • Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5MHz
  • Bluetooth
  • incl. ISO calibration certificate

Material Tester PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs

The material tester is an analog measuring device to determine concrete strength. The measuring method of the material tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the material tester. The resulting rebound enables the material tester to determine the strength of the concrete.

  • Nominal kinetic energy: 4.5 J
  • For high-strength concrete
  • Simple and quick operation
  • For determining concrete hardness
  • Schmidt principle

Material Tester PCE-RT 11
US$ 1,832.00
ex. VAT, ex. delivery costs

The Material Tester PCE-RT 11 is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device.


  • Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
  • Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
  • Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
  • Robust Piezoelectric sensor
  • Accuracy: ± 15% and Repeatability < 12
  • Built-in rechargeable li-ion battery
Material Tester PCE-CT 90
US$ 1,947.00
ex. VAT, ex. delivery costs
The material tester is a versatile measuring device. This is made possible by the various optional sensors on the material tester. Thanks to the surface temperature sensor, the material tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Material Surface Roughness Tester PCE-RT 1200
US$ 2,017.00
ex. VAT, ex. delivery costs
The Material Surface Roughness Tester PCE-RT 1200 is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The material surface roughness tester PCE-RT 1200 is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  • Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
  • Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
  • Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
  • Induction method with Diamond sensor
  • Accuracy < ± 10% and Repeatability < 6%
  • Saves up to 20 Data points
  • Micro-USB interface
  • Built-in rechargeable li-ion battery

Material Thickness Meter PCE-CT 100N
US$ 2,019.00
ex. VAT, ex. delivery costs
Wireless
The material thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the material thickness meter are used for the non-destructive testing of materials.

  • Measuring range: 0 … 1250 µm
  • Accuracy: ± (1% + 1 µm)
  • Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
  • Measurement data storage for up to 500 data
  • Data transfer via wifi and USB
  • Two different probes for NFe and Fe (included)
Material Hardness Tester for Metal PCE-2600N
US$ 1,897.00
ex. VAT, ex. delivery costs

The Material Hardness Tester for Metal PCE-2600N is used wherever a fast hardness test has to be carried out. It is possible to use the material tester PCE-2600N to determine the surface hardness of many metals. The material tester PCE-2600N is especially suitable for quality or product inspection.

  • Measurement according to Leeb Rebound method
  • Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
  • Accuracy: ± 0.5%, Repeatability: ± 0.8%
  • Impactor: DL
  • Display: 128 x 64 OLED

Material Tester PCE-RT 11-ICA Incl. ISO Calibration Certificate
US$ 2,137.00
ex. VAT, ex. delivery costs
ISO Calibration

The Material Tester PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device.


  • Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
  • Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
  • Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
  • Robust Piezoelectric sensor
  • Accuracy: ± 15% and Repeatability < 12%
  • Built-in rechargeable li-ion battery
  • Inc. ISO Calibration Certificate