Products for 'Comprobador de material Barcol PCE 1000N '

US$ 1,168.00

ex. VAT, ex. delivery costs

Due to its compact design, the PCE-2550 material tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the material tester PCE-2550 is versatile.

Measurement according to Leeb Rebound method
Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
Accuracy: ± 0.4%, Repeatability: ± 0.6%
Impact Device: Type D
Measuring Direction: 360°
Internal measured value memory

Material Tester PCE-2000N

US$ 1,177.00

ex. VAT, ex. delivery costs

The PCE Instruments PCE-2000N material tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

Measurement according to Leeb Rebound method
Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
External impact device on 1.5 m / 4.9 ft cable
Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
Storage data measurements on a USB stick
Color display, Measurement in different angles possible, Various other impactors as accessories

Material Tester PCE-HT 224E with Digital Display

US$ 1,315.00

ex. VAT, ex. delivery costs

The Material Tester is a measuring tool for testing the strength of concrete. The Material Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the Material Tester. The Material Tester is also suitable for measuring hardness of rolled paper. The Material Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
Digital Display of results
USB interface for connection to a PC
Data storage
Rechargeable battery

Material Thickness Meter PCE-TG 300-NO5

US$ 1,356.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Material Tester PCE-TG 300-NO5

US$ 1,356.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Material Tester PCE-TG 300-NO5/90

US$ 1,328.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Material Thickness Meter PCE-TG 150 HT

US$ 1,254.00

ex. VAT, ex. delivery costs

The material thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the material thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F

Material Thickness Meter PCE-TG 150A HT

US$ 1,263.00

ex. VAT, ex. delivery costs

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C

Material Tester PCE-CT 80-FN3

US$ 1,172.00

ex. VAT, ex. delivery costs

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"