Cable Detector PCE-CL 10
US$ 395.00
ex. VAT, ex. delivery costs

PCE-CL 10 is a cable detector that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.


- Operating temperature / humidity: 0 ... +40 ºC or
  +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or
  -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

Cable Locator PCE-CL 10
US$ 395.00
ex. VAT, ex. delivery costs

PCE-CL 10 is a cable locator that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.


- Operating temperature / humidity: 0 ... +40 ºC or
  +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or
  -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

Cable Detector PCE-CL 20
US$ 396.00
ex. VAT, ex. delivery costs

The PCE-CL 20 is a cable detector or locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


  • Output signal: 125 kHz
  • Compatible with one- or two-pole circuits
  • Automatic, manual and UAC measuring modes

Humidity Detector PCE-DPM 10
US$ 5,253.00
ex. VAT, ex. delivery costs
The humidity detector from PCE Instruments enables precise determination of the dew point in pressurised systems. Thanks to its robust design, the device can be used for industrial applications up to 15 bar.

  • Dew point measuring range from -100 … +50 °C
  • Pressure range up to 15 bar differential pressure
  • Data logger for up to 100 million measured values
  • Adjustable alarm limits
  • Touch LC display
Humidity Detector PCE-DPM 10-SFKIT incl. Smart Features
US$ 5,597.00
ex. VAT, ex. delivery costs
The humidity detector from PCE Instruments enables precise determination of the dew point in pressurised systems. Thanks to its robust design, the device can be used for industrial applications up to 15 bar.

  • Dew point measuring range from -100 … +50 °C
  • Pressure range up to 15 bar differential pressure
  • Data logger for up to 100 million measured values
  • Adjustable alarm limits
  • Touch LC display
  • Smart features:
  • Prediction of the final dew point value
  • Camera function
  • PDF report function in accordance with ISO 8573-1
Cable Locator PCE-CL 20
US$ 396.00
ex. VAT, ex. delivery costs

The PCE-CL 20 is a cable locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


  • Output signal: 125 kHz
  • Compatible with one- or two-pole circuits
  • Automatic, manual and UAC measuring modes 

Cable Fault Meter PCE-CL 20
US$ 396.00
ex. VAT, ex. delivery costs

The PCE-CL 20 is a cable fault meter or locator used to detect live and voltage-free electrical wires. This cable fault meter also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


  • Output signal: 125 kHz
  • Compatible with one- or two-pole circuits
  • Automatic, manual and UAC measuring modes 

Cable Detector PCE-MO 2005
US$ 1,161.00
ex. VAT, ex. delivery costs
The Cable Detector with a measurement range from 0 µΩ to 6000 Ω precisely measures the smallest resistances and is used to check critical connections in electronics and electrical engineering. The Cable Detector offers 6 selectable measurement ranges, uses the 4-wire measuring method and can measure both resistance and inductance.

  • measurement range: 0 µΩ to 6000 Ω
  • resolution: 1 µΩ
  • accuracy: ± 0.25 % of Rd + 25 digits
  • test current: 10 A, 1 A, 100 mA, 10 mA, 1 mA
  • pass/fail display
  • calculation of the cable length
Humidity Detector PCE-WAM 60-KIT
US$ 12,342.00
ex. VAT, ex. delivery costs
ISO Calibration
The Humidity Detector enables the simultaneous or separate measurement of water activity on 4 channels. It measures water activity within a range from 0 ... 1 aw and temperature from -10 ... +50 °C. Our meter is equipped with a 7" touchscreen that displays the data in real time and saves it for later analysis. Results, graphs and measurement data can be called up at any time in the Humidity Detector.

  • water activity: 0 ... 1 aw
  • resolution: 0.0001 aw
  • accuracy: ±0.01 aw (10 ... 30 °C)
  • temperature: -10 ... +50 °C
  • external measuring cell
  • up to 4 aw sensors simultaneously
  • integrated printer
  • memory: 65535 data records per channel
  • real-time display of the measurement curve
  • 7" LC touch display
  • incl. software
  • incl. 4 sensors
Humidity Detector PCE-A-315
US$ 9,558.00
ex. VAT, ex. delivery costs

The humidity detector provides exceptionally accurate grain moisture measurement in real time. The humidity detector uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


  • Boasts a measurement range of 5% to 40% for moisture content during  continuous mass flow with an error of just ±0.5% from 5% to 18% grain  moisture
  • Lowers energy costs by enabling shorter drying times and reduces labor costs  by automating the moisture monitoring process
  • Provides nearly maintenance-free operation, delivering consistently accurate  moisture readings over time
  • Analog output of 4 to 20 mA can be converted to digital for dryer control

Radiation Detector PCE-PSM 10
US$ 1,645.00
ex. VAT, ex. delivery costs
The Radiation Detector has a measurement range of 0.1 to 200 kV and an accuracy of ±10 % and is a test device for detecting the electrostatic voltage on the surface of objects. It uses non-contact measurement technology to detect the electrostatic field. In addition, the Radiation Detector has an earth connection to ensure proper earthing and therefore safety during use.

  • static charge: 0.1 ... 200 kV
  • resolution: 0.1 kV DC
  • accuracy: ±10 %
  • measuring function: hold
  • earth connection
Humidity Detector PCE-WAM 60
US$ 7,472.00
ex. VAT, ex. delivery costs
The Humidity Detector enables the simultaneous or separate measurement of water activity on 4 channels. It measures water activity within a range from 0 ... 1 aw and temperature from -10 ... +50 °C. Our meter is equipped with a 7" touchscreen that displays the data in real time and saves it for later analysis. Results, graphs and measurement data can be called up at any time in the Humidity Detector.

  • water activity: 0 ... 1 aw
  • resolution: 0.0001 aw
  • accuracy: ±0.01 aw (10 ... 30 °C)
  • temperature: -10 ... +50 °C
  • external measuring cell
  • up to 4 aw sensors simultaneously
  • integrated printer
  • memory: 65535 data records per channel
  • real-time display of the measurement curve
  • 7" LC touch display
  • incl. software
Leak Detector PCE-LDC 20
US$ 6,851.00
ex. VAT, ex. delivery costs
The leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

  • Units: bar, psi, MPa, l/min, m³/h, cfm
  • Leak detection in compressed air, refrigerant  and gas systems
  • Leakage assessment
  • Various attachments
  • Wireless headphones
  • Frequency: 38 . .. 42 kHz
  • Measurement rate: 1 Hz
  • Memory capacity: 1 GB
Gas Detector PCE-LDC 20
US$ 6,851.00
ex. VAT, ex. delivery costs
The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

  • Units: bar, psi, MPa, l/min, m³/h, cfm
  • Leak detection in compressed air, refrigerant  and gas systems
  • Leakage assessment
  • Various attachments
  • Wireless headphones
  • Frequency: 38 . .. 42 kHz
  • Measurement rate: 1 Hz
  • Memory capacity: 1 GB
Electromagnetic Radiation Detector PCE-SFS 10
US$ 1,453.00
ex. VAT, ex. delivery costs

An electrostatic measurement is particularly important to check whether surfaces, components or the human body are electrostatically charged. Such electrostatic charges can be detected with the electromagnetic radiation detector.

  • Measuring range: ±60 kV DC
  • Acoustic signal when the measured value is exceeded
  • Temperature and humidity display
  • Laser for aligning the measuring device

Humidity Detector PCE-UX 3081WQ
US$ 6,528.00
ex. VAT, ex. delivery costs
Our Humidity Detector was specially developed for light and bulky materials. Good Laboratory Practice maximum weighing capacity of 400 g, a sample volume of 360 cm³ and a high measuring resolution of 0.001 g, it guarantees precise and reliable moisture measurements. The Humidity Detector works on the principle of drying with simultaneous weight recording whereas the weight loss is continuously measured and displayed as a percentage of the total mass.

  • weighing range: 0 ...400 g
  • resolution: 0.001 g
  • absolute moisture: 0 ... 100 %
  • resolution: 0.01 %
  • heating temperature: 105 ... 360 °C
  • % moisture
  • % dry matter
  • % moisture bd
  • g residual weight / kg
  • residual weight
  • data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)
Humidity Detector PCE-UX 3081WQ
US$ 6,528.00
ex. VAT, ex. delivery costs
Our Humidity Detector was specially developed for light and bulky materials. Good Laboratory Practice maximum weighing capacity of 400 g, a sample volume of 360 cm³ and a high measuring resolution of 0.001 g, it guarantees precise and reliable moisture measurements. The Humidity Detector works on the principle of drying with simultaneous weight recording, whereby the weight loss is continuously measured and displayed as a percentage of the total mass.

  • Weighing range: 0 ...400 g
  • Resolution: 0.001 g
  • Absolute moisture: 0 ... 100 %
  • Resolution: 0.01 %
  • Heating temperature: 105 ... 360 °C
  • % moisture
  • % dry matter
  • % moisture ATRO
  • g Residual weight / kg
  • Residual weight
  • Data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)
Humidity Detector PCE-UX 3081
US$ 6,528.00
ex. VAT, ex. delivery costs
Our Humidity Detector was specially developed for light and bulky materials. Good Laboratory Practice maximum weighing capacity of 400 g, a sample volume of 360 cm³ and a high measuring resolution of 0.001 g, it guarantees precise and reliable moisture measurements. The Humidity Detector is ideal for applications in the wood, agricultural and plastics industries, e.g. for shavings, animal feed or granulates. It delivers precise results even at very low moisture contents.

  • weighing range: 0 ...400 g
  • resolution: 0.001 g
  • absolute moisture: 0 ... 100 %
  • resolution: 0.01 %
  • heating temperature: 40 ... 220 °C
  • % moisture
  • % dry matter
  • % moisture bd
  • g residual weight / kg
  • residual weight
  • data interface: RS232, USB, V24
  • GLP data management
  • Data Bridge software (optional)