Digital Thermometer PCE-670-ICA Incl. ISO Calibration Certificate
US$ 317.00
ex. VAT, ex. delivery costs
ISO Calibration
Digital thermometer PCE-670-ICA incl. ISO calibration certificate for non-contact measurement of surface temperature. The PCE-670 digital thermometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
- Incl. ISO calibration certificate
Food Thermometer PCE-670-ICA Incl. ISO Calibration Certificate
US$ 317.00
ex. VAT, ex. delivery costs
ISO Calibration
Food thermometer PCE-670-ICA incl. ISO calibration certificate for non-contact measurement of surface temperature. The PCE-670 food thermometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
- Incl. ISO calibration certificate
Pyrometer PCE-670-ICA Incl. ISO Calibration Certificate
US$ 317.00
ex. VAT, ex. delivery costs
ISO Calibration
Pyrometer PCE-670-ICA incl. ISO calibration certificate for non-contact measurement of surface temperature. The PCE-670 pyrometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
- Incl. ISO calibration certificate
Temperature Meter PCE-670-ICA Incl. ISO Calibration Certificate
US$ 317.00
ex. VAT, ex. delivery costs
ISO Calibration
Temperature meter PCE-670-ICA incl. ISO calibration certificate for non-contact measurement of surface temperature. The PCE-670 temperature meter has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
- Incl. ISO calibration certificate
Thermometer PCE-670-ICA Incl. ISO Calibration Certificate
US$ 317.00
ex. VAT, ex. delivery costs
ISO Calibration
Thermometer PCE-670-ICA incl. ISO calibration certificate for non-contact measurement of surface temperature. The PCE-670 thermometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
- Incl. ISO calibration certificate
Infrared Thermometer PCE-670-ICA Incl. ISO Calibration Certificate
US$ 317.00
ex. VAT, ex. delivery costs
ISO Calibration
Infrared thermometer PCE-670-ICA incl. ISO calibration certificate for non-contact measurement of surface temperature. The PCE-670 infrared thermometer has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
- Incl. ISO calibration certificate
HVAC Meter PCE-670-ICA Incl. ISO Calibration Certificate
US$ 317.00
ex. VAT, ex. delivery costs
ISO Calibration
HVAC meter PCE-670-ICA incl. ISO calibration certificate for non-contact measurement of surface temperature. The PCE-670 HVAC meter has a display of the current temperature during the measurement. Within one second you get the surface temperature - the non-contact measuring method even from hot, dangerous or difficult to reach objects.

- IR temperature measuring range: -33 ... 500°C / -27.4 ... 932°F
- Accuracy: ± 2% of v. Mw. or ± 2°C / 3.6°F
- Measured value display optionally in °C or °F
- Measurement spot ratio 9: 1
- Incl. ISO calibration certificate
IoT Meter PCE-432-EKIT-ICA incl ISO Calibration Certificate
US$ 6,917.00
ex. VAT, ex. delivery costs
ISO Calibration

The Class 1 IoT meter can be used, e.g., for sound measurement of street noise, aircraft and train noise, event noise, noise coming from construction sites, ports, factories involving heavy machinery, airport/bus stations, stadiums, horse/motor racing tracks etc. The weather conditions do not matter, and hail, snow, rain and similar are no problem for this system for outdoor noise monitoring. The IoT meter is equipped with a GPS receiver which allows the user to assign the measured values to an exact position.

 

- Accuracy class 1
- GPS function
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise
Incl. ISO calibration certificate

Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
US$ 7,959.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Surface Testing - Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Cal.
US$ 7,959.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive surface testing - conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

NDT Test Instruments PCE-COM 20-ICA incl. ISO Calibration Certificate
US$ 7,959.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
US$ 7,959.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Suspended Scale PCE-CSI 30-ICA incl. ISO Calibration Certificate
US$ 5,478.00
ex. VAT, ex. delivery costs
ISO Calibration
The suspended scale for in-house weighing of up to 30 t. The suspended scale has a large shackle on the top and a rotatable hook with a safety catch on the underside. The suspended scale is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate
Weighing Hook PCE-CSI 30-ICA incl. ISO Calibration Certificate
US$ 5,478.00
ex. VAT, ex. delivery costs
ISO Calibration
The weighing hook for in-house weighing of up to 30 t. The weighing hook has a large shackle on the top and a rotatable hook with a safety catch on the underside. The weighing hook is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate
Force Gage PCE-CSI 30-ICA incl. ISO Calibration Certificate
US$ 5,478.00
ex. VAT, ex. delivery costs
ISO Calibration
The force gage for in-house weighing of up to 30 t. The force gage has a large shackle on the top and a rotatable hook with a safety catch on the underside. The force gage is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate
Hanging Scale PCE-CSI 30-ICA incl. ISO Calibration Certificate
US$ 5,478.00
ex. VAT, ex. delivery costs
ISO Calibration
The hanging scale for in-house weighing of up to 30 t. The hanging scale have a large shackle on the top and a rotatable hook with a safety catch on the underside. The hanging scale are operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate
Force Gauge PCE-CSI 30-ICA incl. ISO Calibration Certificate
US$ 5,478.00
ex. VAT, ex. delivery costs
ISO Calibration
The force gauge for in-house weighing of up to 30 t. The force gauge has a large shackle on the top and a rotatable hook with a safety catch on the underside. The force gauge is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate
Crane Scale PCE-CSI 30-ICA incl. ISO Calibration Certificate
US$ 5,478.00
ex. VAT, ex. delivery costs
ISO Calibration
The crane scale for in-house weighing of up to 30 t. The crane scale has a large shackle on the top and a rotatable hook with a safety catch on the underside. The crane scale is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate