Gas Detector PCE-GA 12
US$ 286.00
ex. VAT, ex. delivery costs
The gas detector PCE-GA 12 is a very easy-to-use measuring device. This gas detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the gas detector. 

  • Measuring range up to 10000 ppm
  • Audible alarm with 85 dB
  • Rechargeable battery for mobile use
  • Automatic calibration
  • For the detection of combustible gases
Gas Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

  • Units: bar, psi, MPa, l/min, m³/h, cfm
  • Leak detection in compressed air, refrigerant  and gas systems
  • Leakage assessment
  • Various attachments
  • Wireless headphones
  • Frequency: 38 . .. 42 kHz
  • Measurement rate: 1 Hz
  • Memory capacity: 1 GB
Gas Leak Detector PCE-GA 12
US$ 286.00
ex. VAT, ex. delivery costs
The gas leak detector PCE-GA 12 is a very easy-to-use measuring device. This gas leak detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the gas leak detector. 

  • Measuring range up to 10000 ppm
  • Audible alarm with 85 dB
  • Rechargeable battery for mobile use
  • Automatic calibration
  • For the detection of combustible gases
Gas Leak Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

  • Units: bar, psi, MPa, l/min, m³/h, cfm
  • Leak detection in compressed air, refrigerant  and gas systems
  • Leakage assessment
  • Various attachments
  • Wireless headphones
  • Frequency: 38 . .. 42 kHz
  • Measurement rate: 1 Hz
  • Memory capacity: 1 GB
Gas Detector PCE-LDC 15
US$ 4,353.00
ex. VAT, ex. delivery costs

The gas detector is used in various areas of industry. For example, the gas detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

  • Working frequency: 40 kHz (± 2 kHz)
  • Operating time: >10 hours
  • Various attachments
  • Color display: 3.5" touch panel TFT
  • Soundproof headphones

HVAC Meter PCE-GA 12
US$ 286.00
ex. VAT, ex. delivery costs
The HVAC meter PCE-GA 12 is a very easy-to-use measuring device. This HVAC meter detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the HVAC meter. 

  • Measuring range up to 10000 ppm
  • Audible alarm with 85 dB
  • Rechargeable battery for mobile use
  • Automatic calibration
  • For the detection of combustible gases
Leak Detector PCE-GA 12
US$ 286.00
ex. VAT, ex. delivery costs
The leak detector PCE-GA 12 is a very easy-to-use measuring device. This leak detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the leak detector. 

  • Measuring range up to 10000 ppm
  • Audible alarm with 85 dB
  • Rechargeable battery for mobile use
  • Automatic calibration
  • For the detection of combustible gases
Leak Detector PCE-GA 12
US$ 286.00
ex. VAT, ex. delivery costs
The leak detector PCE-GA 12 is a very easy-to-use measuring device. This leak detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the leak detector. 

  • Measuring range up to 10000 ppm
  • Audible alarm with 85 dB
  • Rechargeable battery for mobile use
  • Automatic calibration
  • For the detection of combustible gases
Environmental Meter PCE-GA 12
US$ 286.00
ex. VAT, ex. delivery costs
The environmental meter PCE-GA 12 is a very easy-to-use measuring device. This environmental meter detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the environmental meter. 

  • Measuring range up to 10000 ppm
  • Audible alarm with 85 dB
  • Rechargeable battery for mobile use
  • Automatic calibration
  • For the detection of combustible gases
Environmental Tester PCE-GA 12
US$ 286.00
ex. VAT, ex. delivery costs
The environmental tester PCE-GA 12 is a very easy-to-use measuring device. This environmental tester detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the environmental tester. 

  • Measuring range up to 10000 ppm
  • Audible alarm with 85 dB
  • Rechargeable battery for mobile use
  • Automatic calibration
  • For the detection of combustible gases
In-Process Moisture Sensor for Grain PCE-A-315
US$ 9,558.00
ex. VAT, ex. delivery costs

The PCE-A-315 inline or in-process moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


  • Boasts a measurement range of 5% to 40% for moisture content during  continuous mass flow with an error of just ±0.5% from 5% to 18% grain  moisture
  • Lowers energy costs by enabling shorter drying times and reduces labor costs  by automating the moisture monitoring process
  • Provides nearly maintenance-free operation, delivering consistently accurate  moisture readings over time
  • Analog output of 4 to 20 mA can be converted to digital for dryer control

Moisture Sensor PCE-MWM 220
US$ 7,722.00
ex. VAT, ex. delivery costs

Moisture sensor for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture sensor for liquid materials has a processing unit with RS232/RS485 interfaces.


  • Measurement range: 0 … 100 %
  • Limits of permissible absolute error of the measurements: Δ = 0,035 +0,05·W
  • Temperature measurement range: -40 … +150 °C

Gas Detector Gas-Pro-3
US$ 2,525.03
ex. VAT, ex. delivery costs

This gas detector Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.


  • Purpose: Personal protection
  • Sensor type: CO / CO2 / H2S / O2 / CH4
  • Memory: Yes
  • Interface: USB
  • Includes suction pump
  • Other gas sensors available upon request. Please email jmu@pce-  instruments.com (UK) or rhe@pce-instruments.com (US) for details


Gas Leak Detector PCE-LDC 15
US$ 4,353.00
ex. VAT, ex. delivery costs

The gas leak detector is used in various areas of industry. For example, the gas leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

  • Working frequency: 40 kHz (± 2 kHz)
  • Operating time: >10 hours
  • Various attachments
  • Color display: 3.5" touch panel TFT
  • Soundproof headphones

Moisture Sensor PCE-MWM 240-A
US$ 6,588.00
ex. VAT, ex. delivery costs

Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, … is continuously measurable.

  • Stainless sensor rod (250 mm length)
    • Lab analysis of your sample determines % error
    • Measuring range: 0 … 100%
    • Material temperature range: -0 … +80 °C  (+41 … +176 °F)
    • Analog and digital signal output
Moisture Sensor PCE-MWM 200
US$ 5,669.00
ex. VAT, ex. delivery costs

The moisture sensor is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture sensor is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).


  • Readability mass fraction of water: 0 … 100%
  • Moisture measurement range: ± 0.1 … 100% (water mass fraction))
  • Maximum permissible absolute error moisture measurement: Varies by material, lab test required
  • Temperature range: +5 … +76 °C

Gas Leak Detector Gas-Pro-3
US$ 2,525.03
ex. VAT, ex. delivery costs

This Gas Leak Detector Gas-Pro-3 can gauge with its sensors a maximum of five different gases. Because of this versatility, the Gas Leak Detector Gas-Pro-3 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.


  • Purpose: Personal protection
  • Sensor type: CO / CO2 / H2S / O2 / CH4
  • Memory: Yes
  • Interface: USB
  • Includes suction pump
  • Other gas sensors available upon request. Please email jmu@pce-  instruments.com (UK) or rhe@pce-instruments.com (US) for details


Gas Detector Gas-Pro-2
US$ 2,244.00
ex. VAT, ex. delivery costs

This gas detector Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.


  •  Purpose: Personal protection
  • Sensor type: CO / H2S / O2 / CH4
  • Memory: Yes
  • Interface: USB
  • Includes suction pump
  • Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)