Durometer PCE-HT-225A
US$ 513.00
ex. VAT, ex. delivery costs

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • kg/cm², psi, and MPa conversion tables 
  • Optional test anvil to verify accuracy listed under accessories 

Material Tester PCE-HT-225A
US$ 513.00
ex. VAT, ex. delivery costs

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² (1450 … 8702 psi)
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • kg/cm², psi, and MPa conversion tables 
  • Optional test anvil to verify accuracy listed under accessories 

Hardness Test Instrument PCE-HT-225A
US$ 513.00
ex. VAT, ex. delivery costs

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • kg/cm², psi, and MPa conversion tables 
  • Optional test anvil to verify accuracy listed under accessories 

Roll Hardness Test Instrument PCE-HT-225A
US$ 513.00
ex. VAT, ex. delivery costs

PCE-HT-225A is a heavy-duty roll hardness tester or concrete test hammer, also called a paper roll rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with rolled paper, concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • kg/cm², psi, and MPa conversion tables 
  • Optional test anvil to verify accuracy listed under accessories 

Concrete Rebound Test Hammer PCE-HT-225A
US$ 513.00
ex. VAT, ex. delivery costs

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² (1450 … 8702 psi)
  • Impact energy: 2.207 J or N-m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • kg/cm², psi, and MPa conversion tables 
  • Optional test anvil to verify accuracy listed under accessories 

NDT Test Instruments PCE-HT-225A
US$ 513.00
ex. VAT, ex. delivery costs

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • kg/cm², psi, and MPa conversion tables 
  • Optional test anvil to verify accuracy listed under accessories 

Concrete Hardness Tester PCE-HT-225A
US$ 513.00
ex. VAT, ex. delivery costs

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • kg/cm², psi, and MPa conversion tables 
  • Optional test anvil to verify accuracy listed under accessories 

Surface Testing - Concrete Hammer PCE-HT-225A
US$ 513.00
ex. VAT, ex. delivery costs

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • kg/cm², psi, and MPa conversion tables 
  • Optional test anvil to verify accuracy listed under accessories 

Durometer PCE-HT 225E
US$ 2,903.00
ex. VAT, ex. delivery costs

PCE-HT 225E is a durometer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

Hardness Tester PCE-HT 225E
US$ 2,903.00
ex. VAT, ex. delivery costs

PCE-HT 225E is a hardness test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

Material Tester PCE-HT 225E
US$ 2,903.00
ex. VAT, ex. delivery costs

PCE-HT 225E is a material test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

Concrete Rebound Test Hammer PCE-HT 225E
US$ 2,903.00
ex. VAT, ex. delivery costs

PCE-HT 225E is a concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

NDT Test Instruments PCE-HT 225E
US$ 2,903.00
ex. VAT, ex. delivery costs

PCE-HT 225E is a roll hardness test hammer, also called a rolled paper rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with rolled paper, concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

Surface Testing - Concrete Hammer PCE-HT 225E
US$ 2,903.00
ex. VAT, ex. delivery costs

PCE-HT 225E is a surface testing concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

Durometer PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs

The durometer is an analog measuring device to determine concrete strength. The measuring method of the concrete durometer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the durometer. The resulting rebound enables the durometer to determine the strength of the concrete.

  • Nominal kinetic energy: 4.5 J
  • For high-strength concrete
  • Simple and quick operation
  • For determining concrete hardness
  • Schmidt principle

Material Tester PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs

The material tester is an analog measuring device to determine concrete strength. The measuring method of the material tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the material tester. The resulting rebound enables the material tester to determine the strength of the concrete.

  • Nominal kinetic energy: 4.5 J
  • For high-strength concrete
  • Simple and quick operation
  • For determining concrete hardness
  • Schmidt principle

Roll Hardness Tester PCE-HT-450
US$ 1,957.00
ex. VAT, ex. delivery costs

The roll hardness tester is an analog measuring device to determine concrete strength. The measuring method of the roll hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the roll hardness tester. The resulting rebound enables the roll hardness tester to determine the strength of the concrete.

  • Nominal kinetic energy: 4.5 J
  • For high-strength concrete
  • Simple and quick operation
  • For determining concrete hardness
  • Schmidt principle

Universal Testing Machine PCE-HTS 50
US$ 2,196.00
ex. VAT, ex. delivery costs

The motorized tension-compression Universal Testing Machine is a motorized test station with a force range of up to 500 N. With the help of the horizontal Universal Testing Machine, it is possible to to carry out tension-compression tests.

  • Force range: 500 N / 50 kg / 110 lb
  • Distance display resolution: 0.02 mm
  • Resolution: 1 mm/min
  • Tensile and compression testing
  • Travel: 270 mm / 10.6"