Portable Industrial Floor Scale PCE-WWSB8-S
US$ 3,491.00
ex. VAT, ex. delivery costs

PCE-WWSB8-S is a portable industrial floor scale consisting of two weighing platforms and a carrying case with a built-in display and printer. Featuring connections for up to four weighing platforms (additional weighing platforms sold separately - see accessories), this floor scale calculates the total weight, wheel load and axle load of a vehicle.


- Weighing capacity per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
- Sum function for calculating vehicle weight plus trailer
- IP65 ingress protection rating on load cell for outdoor use

Floor Scale PCE-WWSB1.5-S
US$ 2,708.25
ex. VAT, ex. delivery costs
The axle load floor scale PCE-WWSB1.5-S is an optimal tool to determine the weight of small vans in particular. In this version, the axle load scale consists of 2 weighing platforms with a wheel load of 1.5 t. The weighing results are shown on the supplied display.

- Weighing range per platform (wheel load): 1500 kg / 3306 lbs / 1.5 T
- Readability: 0.5 kg / 1.1 lb
- Dimension per platform: 300 x 400 x 58 / 11.8 x 15.7 x 2.3"
- Calibratable
Surface Testing - Colorimeter PCE-CRM 40
US$ 3,260.00
ex. VAT, ex. delivery costs

PCE-CRM 40 is a portable handheld colorimeter or spectrophotometer used to accurately measure the correlated color temperature (CCT - in Kelvin), illuminance, chromaticity, excitation purity (Pe), luminous flux (in lumens - lm), RGB and dominant wavelength of light sources such as LED, organic LED (OLED) and other forms of organic electroluminescence (EL).


- Measuring range: 0.1 ... 150,000 lux / 0.01 ... 15,000 foot-candle
- Spectral wavelength range: 360 ... 780 nm
- Display: 3.2" colour LCD
- Chromaticity: Ev xy, Ev u'v'

Condition Monitoring Inspection Camera PCE-PIC 40
US$ 3,141.00
ex. VAT, ex. delivery costs
The PCE-PIC 40 condition monitoring inspection camera is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The condition monitoring inspection camera PCE-PIC 40 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 40 m / 131 ft push cable
- Electronic meter count
- Battery and mains operation
- Waterproof up to 20 m / 66 ft 
NDT Tester Inspection Camera PCE-PIC 40
US$ 3,141.00
ex. VAT, ex. delivery costs
The PCE-PIC 40 NDT tester inspection camera is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The NDT tester inspection camera PCE-PIC 40 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable.

- Cable diameter / head diameter: 23 mm / 0.9 in
- 40 m / 131 ft push cable
- Electronic meter count
- Battery and mains operation
- Waterproof up to 20 m / 66 ft 
Paint Test Equipment PCE-CRM 40
US$ 3,260.00
ex. VAT, ex. delivery costs

The paint test equipment is used to accurately measure the correlated color temperature (CCT - in Kelvin), illuminance, chromaticity, excitation purity (Pe), luminous flux (in lumens - lm), RGB and dominant wavelength of light sources such as LED, organic LED (OLED) and other forms of organic electroluminescence (EL).


- Measuring range: 0.1 ... 150,000 lux / 0.01 ... 15,000 foot-candle
- Spectral wavelength range: 360 ... 780 nm
- Display: 3.2" colour LCD
- Chromaticity: Ev xy, Ev u'v'

LED Light Meter PCE-CRM 40
US$ 3,260.00
ex. VAT, ex. delivery costs

PCE-CRM 40 is a portable handheld LED light meter or spectrophotometer used to accurately measure the correlated color temperature (CCT - in Kelvin), illuminance, chromaticity, excitation purity (Pe), luminous flux (in lumens - lm), RGB and dominant wavelength of light sources such as LED, organic LED (OLED) and other forms of organic electroluminescence (EL).


- Measuring range: 0.1 ... 150,000 lux / 0.01 ... 15,000 foot-candle
- Spectral wavelength range: 360 ... 780 nm
- Display: 3.2" colour LCD
- Chromaticity: Ev xy, Ev u'v'

Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ S
US$ 3,886.00
ex. VAT, ex. delivery costs
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 91 x 52 x 44 mm
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 10 million measuring points
- LiPo battery
Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ S-ICA incl. ISO-Calibration Certificate
US$ 4,263.00
ex. VAT, ex. delivery costs
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameter DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 91 x 52 x 44 mm
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity, volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
incl. ISO-Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 200+ S-ICA incl. ISO-Calibration Certificate
US$ 4,263.00
ex. VAT, ex. delivery costs
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 91 x 52 x 44 mm
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 10 million measuring points
- LiPo battery
incl. ISO-Calibration Certificate
Portable Ultrasonic Flow Meter PCE-TDS 200 S
US$ 2,640.00
ex. VAT, ex. delivery costs
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the
Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameter: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity, volume flow and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
Portable Ultrasonic Flow Meter PCE-TDS 200 S
US$ 2,640.00
ex. VAT, ex. delivery costs
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
Clamp-on Ultrasonic Flow Meter PCE-TDS 200+ S-SW-KIT incl. software
US$ 4,046.00
ex. VAT, ex. delivery costs
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 91 x 52 x 44 mm
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 10 million measuring points
- LiPo battery
- incl. software
Clamp-on Ultrasonic Flow Meter PCE-TDS 200 S-ICA incl. ISO-Calibration Certificate
US$ 3,017.00
ex. VAT, ex. delivery costs
ISO Calibration
The Clamp-on Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Clamp-on Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameter: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity, volume flow and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
incl. ISO-Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 200 S-ICA incl. ISO-Calibration Certificate
US$ 3,017.00
ex. VAT, ex. delivery costs
ISO Calibration
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
incl. ISO-Calibration Certificate
Portable Ultrasonic Flow Meter PCE-TDS 200 S-SW-KIT incl. software
US$ 2,798.00
ex. VAT, ex. delivery costs
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the
Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
incl. software
Portable Ultrasonic Flow Meter PCE-TDS 200 S-SW-KIT incl. software
US$ 2,798.00
ex. VAT, ex. delivery costs
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- Sensor dimensions: 45 x 30 x 30 mm
- Temperature resistance from -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
- incl. software
HVACR Tester PCE-RS 40
US$ 1,036.00
ex. VAT, ex. delivery costs

HVACR tester for visual inspection in small and narrow holes and cavities. With a diameter of 4 mm and a length of 175 or 432 mm / 6.9 or 17 in this HVACR tester is very versatile. The integrated LED lamp allows for a very good illumination of cavities to be inspected.


- Diameter only 4 mm / 0.16 in
- Useful length 175 or 432 mm / 6.9 or 17 in
- LED lighting
- Battery operation