Electrical Tester PCE-MO 2002-ICA incl. ISO-Calibration certificate
US$ 1,171.00
ex. VAT, ex. delivery costs
ISO Calibration
This Electrical Tester comes with a housing protected against water splash. With the Electrical Tester PCE-MO 2002 Series you can measure from 100 μΩ up to 2000 Ω.

  • Measuring ranges / resolution: 5 ranges, 0 … 200 mΩ / 0 … 2000 Ω
  • Accuracy: ± 0.5% of reading 
  • Max. Output voltage: (C1-C2) 20 V
  • Power source 12V DC
  • incl. ISO-Calibration certificate
Milliohm Meter PCE-MO 2002-ICA incl. ISO-Calibration certificate
US$ 1,171.00
ex. VAT, ex. delivery costs
ISO Calibration

This Milliohm Meter comes with a housing protected against water intrusion. With the Milliohm Meter PCE-MO 2002 Series you can measure from 100 μΩ up to 2000 Ω. With this Milliohm Meter measurement values are displayed by means of a LCD display with 3.5 digits and a good readability.


  • Measuring ranges / resolution: 5 ranges, 0 … 200 mΩ / 0 … 2000 Ω
  • Accuracy: ± 0.5% of reading 
  • Max. Output voltage: (C1-C2) 20 V
  • Power source 12V DC
  • incl. ISO-Calibration certificate

 

Milliohmmeter PCE-MO 2002-ICA incl. ISO-Calibration certificate
US$ 1,171.00
ex. VAT, ex. delivery costs
ISO Calibration

This Milliohm Meter comes with a housing protected against water intrusion. With the Milliohm Meter PCE-MO 2002 Series you can measure from 100 μΩ up to 2000 Ω. With this Milliohm Meter measurement values are displayed by means of a LCD display with 3.5 digits and a good readability.


  • Measuring ranges / resolution: 5 ranges, 0 … 200 mΩ / 0 … 2000 Ω
  • Accuracy: ± 0.5% of reading
  • Max. Output voltage: (C1-C2) 20 V
  • Power source 12V DC
  • incl. ISO-Calibration certificate

 

Dynamometer PCE-DFG 500 X
US$ 1,170.00
ex. VAT, ex. delivery costs
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

  • Measuring range: 0 … 500 N
  • Resolution: 0.1 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7200 Hz
Force Gauge PCE-DFG 500 X
US$ 1,170.00
ex. VAT, ex. delivery costs
The force gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

  • Measuring range: 0 … 500 N
  • Resolution: 0.1 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7200 Hz
Durometer PCE-2550
US$ 1,168.00
ex. VAT, ex. delivery costs

Due to its compact design, the PCE-2550 durometer is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the durometer PCE-2550 is versatile.

  • Measurement according to Leeb Rebound method
  • Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
  • Accuracy: ± 0.4%, Repeatability: ± 0.6%
  • Impact Device: Type D
  • Measuring Direction: 360°
  • Internal measured value memory

Hardness Tester PCE-2550
US$ 1,168.00
ex. VAT, ex. delivery costs

Due to its compact design, the PCE-2550 hardness tester is easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the hardness tester PCE-2550 is very versatile.

  • Measuring ranges: 170 … 960 HLD
  • Measurement direction: 360°
  • Impact device: Type D
  • Measurement units: HL, HB, HRB, HRC, HRA, HV, HS
  • Internal measurement memory

Material Tester PCE-2550
US$ 1,168.00
ex. VAT, ex. delivery costs

Due to its compact design, the PCE-2550 material tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the material tester PCE-2550 is versatile.

  • Measurement according to Leeb Rebound method
  • Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
  • Accuracy: ± 0.4%, Repeatability: ± 0.6%
  • Impact Device: Type D
  • Measuring Direction: 360°
  • Internal measured value memory

Metal Hardness Tester PCE-2550
US$ 1,168.00
ex. VAT, ex. delivery costs

Due to its compact design, the PCE-2550 metal hardness tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the metal hardness tester PCE-2550 is versatile.

  • Measurement according to Leeb Rebound method
  • Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
  • Accuracy: ± 0.4%, Repeatability: ± 0.6%
  • Impact Device: Type D
  • Measuring Direction: 360°
  • Internal measured value memory