Industrial Measurement Products and Solutions
Order no.: PCE-N25H

The digital indicator PCE-N25H is used for measuring and displaying direct current and direct voltage. Depending on your specific needs, the digital indicator can be ordered with different inputs, such as ±100 V DC, ±250 V DC, ±400 V DC, ±1 A, ±5 A, 0...100 V DC or 0...250 V DC. The input signal of the digital indicator is freely scalable, which increases its application possibilities.


- 7 different input options
- Accuracy: ± (0.2 % FS + 1 digit)
- Configuration via software
- 5-digit LED display

 

Manufacturer: PCE Instruments
US$ 120.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PH20
The pH meter PCE-PH20 is a user-friendly hand-held pH device that allows fast and reliable pH measurement. This pH meter is very suitable for use in the area of aquaristics or aquarium care. The pH meter PCE-PH20 has a three-point calibration, which is carried out automatically.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media or water based
Manufacturer: PCE Instruments
US$ 119.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PH20
The environmental meter is a user-friendly hand-held pH device that allows fast and reliable pH measurement. This environmental meter is very suitable for use in the area of aquaristics or aquarium care. The environmental meter has a three-point calibration, which is carried out automatically.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media or water based
Manufacturer: PCE Instruments
US$ 119.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PH20
The environmental tester is a user-friendly hand-held pH device that allows fast and reliable pH measurement. This environmental tester is very suitable for use in the area of aquaristics or aquarium care. The environmental tester has a three-point calibration, which is carried out automatically.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media or water based
Manufacturer: PCE Instruments
US$ 119.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PH20
The water analysis meter PCE-PH20 is a user-friendly hand-held pH device that allows fast and reliable pH measurement. This water analysis meter is very suitable for use in the area of aquaristics or aquarium care. The water analysis meter PCE-PH20 has a three-point calibration, which is carried out automatically.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media or water based solutions
Manufacturer: PCE Instruments
US$ 119.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC3
This clamp meter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp meter.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC3
This clamp on tester was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp on tester.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC3
This current clamp was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this current clamp.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC3
This digital multimeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this digital multimeter.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N25S

The digital universal indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the digital universal indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the digital universal indicator is freely scalable, which increases its application possibilities.

 

- IP65 protected front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

 

Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC3
This electrical tester was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this electrical tester.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC3
This HVAC meter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this HVAC meter.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MSR 100

PCE-MSR 100 is a magnetic stirrer or magnetic stir plate commonly used in laboratories to ensure liquid samples are homogeneous in consistency and temperature. Proper mixing also boosts sensor response time, allowing measuring instruments to achieve stable readings more quickly.


- Maximum stirring volume: 2 Liters (L) ≈ 0.52 gallon
- Adjustable stirring speeds: 0 ... 1250 rpm
- Includes one magnetic stirrer bar 

 

Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N25Z
The digital indicator PCE-N25Z can be used for processing different AC input signals. Depending on your specific needs, the digital indicator can be ordered with different inputs, like 100 V AC, 250 V AC, 400 V AC, 1 A AC, 5 A AC and 20...50 Hz. The input signal of the digital indicator is freely scalable, which increases its application possibilities.

- IP65 protected front
- 6 different inputs available
- configuration via software
- 5-digit LED display

Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RE72

The temperature controller PCE-RE72 is a compact PID controller which can be used in a wide range of applications. On the input side, this temperature controller PCE-RE72 processes the widely used process signals 4 ... 20 mA and 0 ... 10 V as well as resistance sensors and thermocouples. The temperature controller can be used very flexibly, since different operating modes are available. Besides the simple on / off control with adjustable hysteresis, the digital controller also offers various combinations of the PID control. Thanks to the SMART PID control, this temperature controller achieves the setpoint value very quickly and with a slight overshoot.


- Two 4-digit LED displays
- Two output relays
- Front protected to IP65
- Analogue universal input

 

Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N25T
The digital indicator PCE-N25T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.

- IP65 protected front
- for thermocouples and resistance thermometers
- configuration via software
- 5-digit LED display

Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC3
This voltmeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this voltmeter.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
Manufacturer: PCE Instruments
US$ 117.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-ICS 30
The inexpensive counting scale PCE-ICS 30 is an ideal companion for fast inventories and inventories. The inexpensive counting scale convinces with the three illuminated displays, which show the user the total weight, the unit weight as well as the number of units even in poorly lit locations.

- Weighing range [Max]: 30,000 g / 30 kg
- Readability [d]: 1 g
- Dimension weighing plate [Ø / WxD]: 260 x 220 mm / 10.2 x 8.7 in 
- Battery operation
- Calibratable
Manufacturer: PCE Instruments
US$ 115.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N24S

The PCE-N24S digital indicator is used for the signal processing of 4 .. 20 mA. The PCE-N24S digital indicator has a 5-digit LED display to allow the user to read the directly measured current values​​.

 

- IP 65 in the front
- for 4-20 mA signals
- connection by means of a screw terminal


Manufacturer: PCE Instruments
US$ 115.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-P20Z

The PCE-P20Z transmitter is used to convert a measured current into a standard signal. This makes it possible to determine the most diverse currents with the transmitter.

- Input: Alternating current
- Various supply voltages
- For direct or indirect current measurement
- Current transformer can be connected
- With voltage output or current output

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
US$ 112.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer