Temperature Meter PCE-A 430
US$ 90.00
ex. VAT, ex. delivery costs
The temperature meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The temperature meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature: -20 °C ... +50 °C
  • Beaufort scale
  • Cup cross - sensor
Wind Measurer PCE-A 430
US$ 90.00
ex. VAT, ex. delivery costs
The wind measurer enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The wind measurer is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Wind Speed Meter PCE-A 430
US$ 90.00
ex. VAT, ex. delivery costs
The wind speed meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The wind speed meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Clamp on Tester PCE-CM 5
US$ 88.00
ex. VAT, ex. delivery costs
The clamp on tester is a multimeter with a multitude of different functions. Thus, with the clamp on tester, current measurements up to 200 A AC can be carried out without contact. This current range of the clamp on tester already covers a large range of current measurements. 

Measurement function:
  • AC
  • DC
  • DC voltage
  • AC voltage
  • LowZ AC / DC
  • Resistance
  • Continuity test
  • Diode test
  • Capacities
  • Temperature (type K)
  • Frequency (with the current clamp)
  • Frequency (during voltage measurement)
  • frequency (direct measurement)
  • Duty cycle
Air Humidity Meter PCE-HT 70
US$ 86.00
ex. VAT, ex. delivery costs
The air humidity meter records the air temperature and humidity and stores them internally. The compact air humidity meter with a large memory (up to a maximum of 16,000 values) is primarily used for long-term registration, for example in the food sector (e.g. refrigerated counters in supermarkets, refrigerated transport, warehouses) or in the industrial sector (heating and cooling processes, machine temperatures, product warehouses…)

  • Measuring range temperature: -40 … 85 °C
  • Measuring range rel. humidity: 0 … 100%
  • Max. 16,000 data records can be saved
  • Export to software possible
  • 450 day running time
  • Adjustable storage rate from 1 second
Clamp Meter PCE-CM 6
US$ 86.00
ex. VAT, ex. delivery costs
The Clamp Meter is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Clamp Meter is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

  • direct voltage: 0.1 mV ... 1000 V
  • alternating voltage: 0.1 mV ... 750 V
  • alternating current: 0.1 ... 1000 A
  • resistance: 0.1 Ω ... 60 MΩ
  • capacitance: 1 nF ... 100 mF
  • frequency: 0 Hz ... 10 MHz
  • temperature sensor: -20 ... +1000 °C
  • non-contact voltage detection (NCV)
  • automatic and manual measurement range selection
Clamp on Tester PCE-CM 6
US$ 86.00
ex. VAT, ex. delivery costs
The Clamp on Tester is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Clamp on Tester is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

  • direct voltage: 0.1 mV ... 1000 V
  • alternating voltage: 0.1 mV ... 750 V
  • alternating current: 0.1 ... 1000 A
  • resistance: 0.1 Ω ... 60 MΩ
  • capacitance: 1 nF ... 100 mF
  • frequency: 0 Hz ... 10 MHz
  • temperature sensor: -20 ... +1000 °C
  • non-contact voltage detection (NCV)
  • automatic and manual measurement range selection
Climate Meter PCE-HT 70
US$ 86.00
ex. VAT, ex. delivery costs

The climate meter records the air temperature and humidity and stores them internally. The compact climate meter with a large memory (up to a maximum of 16,000 values) is primarily used for long-term registration, for example in the food sector (e.g. refrigerated counters in supermarkets, refrigerated transport, warehouses) or in the industrial sector (heating and cooling processes, machine temperatures, product warehouses…)

  • Measuring range temperature: -40 … 85 °C
  • Measuring range rel. humidity: 0 … 100%
  • Max. 16,000 data records can be saved
  • Export to software possible
  • 450 day running time
  • Adjustable storage rate from 1 second

Current Clamp PCE-CM 6
US$ 86.00
ex. VAT, ex. delivery costs
The Current Clamp is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Current Clamp is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

  • direct voltage: 0.1 mV ... 1000 V
  • alternating voltage: 0.1 mV ... 750 V
  • alternating current: 0.1 ... 1000 A
  • resistance: 0.1 Ω ... 60 MΩ
  • capacitance: 1 nF ... 100 mF
  • frequency: 0 Hz ... 10 MHz
  • temperature sensor: -20 ... +1000 °C
  • non-contact voltage detection (NCV)
  • automatic and manual measurement range selection