Flow Meter PCE-WS US2
US$ 990.00
ex. VAT, ex. delivery costs
Flow Meter with RS485 communication for measuring wind speed and direction outdoors. The Flow Meter offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

  • measurement range: 0 ... 160 km/h
  • accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
  • 5 m cable with 4-pin M12 connection
  • RS485 Modbus RTU communication
  • measurement of wind speed and direction
  • protection class IP65 for outdoor areas
Gloss Meter PCE-GM 80-ICA incl. ISO Calibration Certificate
US$ 990.00
ex. VAT, ex. delivery costs
ISO Calibration

The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
  • Incl. ISO calibration certificate

IoT Sensor PCE-BPH 10
US$ 990.00
ex. VAT, ex. delivery costs
Wireless
With the table-top IoT sensor it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the IoT sensor it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

  • pH measuring range: -2.000 … +19.999 pH
  • Resolution: 0.1 / 0.01 pH
  • Measuring range mV: -1999.9 … +1999.9 mV
  • Resolution: 1 mV
  • Temperature measuring range: -10 … +110 °C / 14 … 230 °F
  • Resolution: 0.1 °C
  • USB and Bluetooth interface
  • Memory for 300 measured values
  • Live viewing software
  • 3 point calibration
NDT Tester - Gloss Meter PCE-GM 80-ICA incl. ISO Calibration Certificate
US$ 990.00
ex. VAT, ex. delivery costs
ISO Calibration

The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
  • Incl. ISO calibration certificate

Paint Gloss Tester PCE-GM 80-ICA incl. ISO Calibration Certificate
US$ 990.00
ex. VAT, ex. delivery costs
ISO Calibration

The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
  • Incl. ISO calibration certificate

Panel Meter PCE-BPD-U-46A
US$ 990.00
ex. VAT, ex. delivery costs
The panel meter is designed in such a way that the measured values displayed can be read from a large distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for panel meters is 25 m or 50 m (82 ft or 164 ft).

  • Function: convert analog signal into usable value
  • Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
  • Display range: -1999 … 9999
  • Digit height: 60 mm / 2.3"
  • Number of outputs: 2
  • Voltage supply: 85 … 265 V AC / 120 … 370 V DC
Panel Meter PCE-BPD-U-46D
US$ 990.00
ex. VAT, ex. delivery costs
The panel meter is designed in such a way that the measured values displayed can be read from a large distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for panel meters is 25 m or 50 m (82 ft or 164 ft).

  • Function: convert analog signal into usable value
  • Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
  • Display range: -1999 … 9999
  • Digit height: 60 mm / 2.3"
  • Number of outputs: 2
  • Voltage supply: 11 … 36 V DC
Redox Meter PCE-BPH 10
US$ 990.00
ex. VAT, ex. delivery costs
Wireless

With the table-top redox meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the redox meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

  • pH measuring range: -2.000 … +19.999 pH
  • Resolution: 0.1 / 0.01 pH
  • Measuring range mV: -1999.9 … +1999.9 mV
  • Resolution: 1 mV
  • Temperature measuring range: -10 … +110 °C / 14 … 230 °F
  • Resolution: 0.1 °C
  • USB and Bluetooth interface
  • Memory for 300 measured values
  • Live viewing software
  • 3 point calibration

Salt Water Swimming Pool pH Meter Kit PCE-PH 22-TUM 20-CM ​​41-KIT
US$ 990.00
ex. VAT, ex. delivery costs
The salt water swimming pool pH meter kit PCE-PH 22-TUM 20-CM ​​41-KIT is a very easy to use measuring device kit for determining the pH value, turbidity or salt content in various liquids. With the help of the BNC connection of the pH meter, various pH electrodes can also be connected to the pH meter. The turbidity meter is a handy meter with a large display that meets all the requirements for on-site turbidity measurement. With the salt content measuring device you have the possibility to measure the conductivity value, the sum of all dissolved solids or salts (TDS / Total Dissolved Solids) and the temperature.

  • PCE-PH 22 measuring range: 0.0 … 14.0 pH
  • Measurement accuracy: ± 0.02 pH
  • Resolution: 0.01 pH
  • Device kit for outdoor swimming pools
  • Including the PCE-TUM 20 turbidity meter
  • PCE-TUM 20 measuring range: 0.00 to 50.0 NTU and 50 to 1000 NTU
  • Resolution: 0.01 and 1 NTU
  • Including conductivity meter
Surface Testing - Gloss Meter PCE-GM 80-ICA incl. ISO Calibration Certificate
US$ 990.00
ex. VAT, ex. delivery costs
ISO Calibration

The surface testing gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
  • Incl. ISO calibration certificate

Table pH Meter PCE-BPH 10
US$ 990.00
ex. VAT, ex. delivery costs
Wireless

With the table-top pH meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the pH meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

  • pH measuring range: -2.000 … +19.999 pH
  • Resolution: 0.1 / 0.01 pH
  • Measuring range mV: -1999.9 … +1999.9 mV
  • Resolution: 1 mV
  • Temperature measuring range: -10 … +110 °C / 14 … 230 °F
  • Resolution: 0.1 °C
  • USB and Bluetooth interface
  • Memory for 300 measured values
  • Live viewing software
  • 3 point calibration

Ultrasonic Flow Meter PCE-WS US2
US$ 990.00
ex. VAT, ex. delivery costs
Ultrasonic Flow Meter with RS485 communication for measuring wind speed and direction outdoors. The Ultrasonic Flow Meter offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

  • measurement range: 0 ... 160 km/h
  • accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
  • 5 m cable with 4-pin M12 connection
  • RS485 Modbus RTU communication
  • measurement of wind speed and direction
  • protection class IP65 for outdoor areas
Water Analysis Meter PCE-BPH 10
US$ 990.00
ex. VAT, ex. delivery costs
Wireless

With the table-top water analysis meter it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the water analysis meter it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

  • pH measuring range: -2.000 … +19.999 pH
  • Resolution: 0.1 / 0.01 pH
  • Measuring range mV: -1999.9 … +1999.9 mV
  • Resolution: 1 mV
  • Temperature measuring range: -10 … +110 °C / 14 … 230 °F
  • Resolution: 0.1 °C
  • USB and Bluetooth interface
  • Memory for 300 measured values
  • Live viewing software
  • 3 point calibration

Wind Measurer PCE-WS US2
US$ 990.00
ex. VAT, ex. delivery costs
Wind Measurer with RS485 communication for measuring wind speed and direction outdoors. The Wind Measurer offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

  • measurement range: 0 ... 160 km/h
  • accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
  • 5 m cable with 4-pin M12 connection
  • RS485 Modbus RTU communication
  • measurement of wind speed and direction
  • protection class IP65 for outdoor areas
Wind Sensor PCE-WS US2
US$ 990.00
ex. VAT, ex. delivery costs
Wind Sensor with RS485 communication for measuring wind speed and direction outdoors. The Wind Sensor offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

  • measurement range: 0 ... 160 km/h
  • accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
  • 5 m cable with 4-pin M12 connection
  • RS485 Modbus RTU communication
  • measurement of wind speed and direction
  • protection class IP65 for outdoor areas
Wind Speed Meter PCE-WS US2
US$ 990.00
ex. VAT, ex. delivery costs
Wind Speed Meter with RS485 communication for measuring wind speed and direction outdoors. The Wind Speed Meter offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

  • measurement range: 0 ... 160 km/h
  • accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
  • 5 m cable with 4-pin M12 connection
  • RS485 Modbus RTU communication
  • measurement of wind speed and direction
  • protection class IP65 for outdoor areas
Digital Manifold Gauge PCE-RRM 250 Refrigerant Recovery Device for HVAC
US$ 989.00
ex. VAT, ex. delivery costs
Our digital manifold gauge offers a reliable solution for various applications in air conditioning maintenance and refrigeration technology. With a solid inlet pressure of up to 38.5 bar, it processes a wide range of refrigerants. The digital manifold gauge works with an oil-free motor and is easily transportable.

  • Overpressure protection: 38.5 bar
  • Connections: 1/4 inch SAE
  • Motor power: 0.75 hp
  • High torque and efficient motor
  • For refrigerants
    e.g. R12, R134A, R407A, R407B …etc.
  • Recovery capacity (vapour):
      up to 0.25 kg/min
  • Recovery capacity (liquid):
      up to 2.20 kg/min
  • Recovery capacity (push-pull):
      up to 6.30 kg/min
Heat Pump Tester PCE-RRM 250 Refrigerant Recovery Device for HVAC
US$ 989.00
ex. VAT, ex. delivery costs
Our heat pump tester offers a reliable solution for various applications in air conditioning maintenance and refrigeration technology. With a solid inlet pressure of up to 38.5 bar, it processes a wide range of refrigerants. The heat pump tester works with an oil-free motor and is easily transportable.

  • Overpressure protection: 38.5 bar
  • Connections: 1/4 inch SAE
  • Motor power: 0.75 hp
  • High torque and efficient motor
  • For refrigerants
    e.g. R12, R134A, R407A, R407B …etc.
  • Recovery capacity (vapour):
      up to 0.25 kg/min
  • Recovery capacity (liquid):
      up to 2.20 kg/min
  • Recovery capacity (push-pull):
      up to 6.30 kg/min