- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function

FME is a handheld timber moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.

- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function

FME is a handheld wood moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.

- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%

The Xgard-1-O2 is a single-gas gas sensor used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-O2 is a single-gas Gassensor used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

Air flow meter to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of air flow meter is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.

- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m³/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

Data logger to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of airflow meter is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.

- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m³/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

Air velocity meter to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of air velocity meter is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.

- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m³/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

Wind measurer to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of wind measurer is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.

- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m³/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

HVAC data logger to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of airflow meter is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.

- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m³/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

The infrared thermometer Hi Temp 1800 measures surface temperatures over a wide temperature range. Additional notable benefits of the infrared thermometer are its very short reaction time (< 1 sec.) and the non-contact IR technology. This infrared thermometer (as all the test instruments) is delivered manufacturer calibrated and can additionally be certified to ISO.

- Measuring range: 100 ... 1800°C / 212 ... 3272°F
- Spectral range: 2.3 - 5 µm
- Resolution:  0.1°C / 0.18°F (<1000°C / 1832°F), 1°C / 1.8°F (1000°C)
- Accuracy: ± 2% or 2°C / 3.6°F, whichever is larger

 

 

- Measuring range: 100 ... 1800°C / 212 ... 3272°F
- Spectral range: 2.3 - 5 µm
- Resolution:  0.1°C / 0.18°F (<1000°C / 1832°F), 1°C / 1.8°F (1000°C)
- Accuracy: ± 2% or 2°C / 3.6°F, whichever is larger

 

Data logger to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of airflow meter is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.

- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m³/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

Thermo-Anemometer to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of Thermo-Anemometer is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.

- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m³/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

Wind speed meter to measure air temperature and velocity with calculation of volume of air current and RS-232. This kind of wind speed meter is mainly for use in HVAC systems. The logging instruments are manufacturer calibrated and are delivered incl. ISO calibration certificate.

- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0 °C / 32 ... 122°F (sensor)
- Volumetric flow:  0 ... 36,000 m³/min
- Internal memory: 16,000 values
- Incl. ISO calibration certificate

The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This accelerometer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display.

Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s²
- Velocity: 0.00 ... 399.9 mm/s
- Displacement: 0.000 ... 3.9 mm
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Includes needle sensor and handgrip
- Incl. ISO calibration certificate

The air quality carbon dioxide meter PCE-WMM 100 consists of a main unit and a remote display. The CO2 air quality meter PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The air quality carbon dioxide meter PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm

The carbon dioxide gas leak detector PCE-WMM 100 consists of a main unit and a remote display. The CO2 gas leak detector PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The gas leak detector PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm