Order no.: PCE-MPC 30
This Environmental Testing Device has many functions. With the Environmental Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MPC 30
This Fine Dust Measuring Device has many functions. With the fine dust measuring device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DFG N 500

Digital force gauge PCE-DFG N 500 for tensile force measurement and pressure force measurement up to 500 N. The PCE-DFG N 500 is a digital force gauge PCE-DFG N 500 for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

HVAC Meter with network Analyzer / Clamp on Tester with data logger.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RS 27

Rigid Inspection Camera for visual inspection in small and narrow holes and cavities. With a diameter of 2.7 mm / 0.11 in and a length of 175 mm / 6.9 in this rigid Inspection Camera is very versatile. The integrated LED lamp allows for a very good illumination of cavities to be inspected.


- Diameter 2.7 mm / 0.11 in
- Useful length 175 mm / 6.9 in
- LED lighting
- Battery operation

 

Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MPC 30
This Particle Counter Device has many functions. With the Particle Counter Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
 
- Measurable particle sizes:  PM 2.5 and PM 10
- Measuring range: 0 ... 2000 µg / m³
- Resolution: 1 µg / m³
- Particle counter, HCHO, temperature measurement
- Dew point and wet bulb temperature
Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

The 1-Phase-Power Meter PCE-GPA 62 (Graphic Power Quality Analyzer) with network analyzer / power and energy meter with data logger. The one-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

This power analyzer is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The power analyzer clamp is equipped with data logger. The test instrument is delivered manufacurer calibrated (ISO or certification as an option).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

The power data logger (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TTC 30
The process calibrator PCE-TTC 30 can be used to simulate different thermocouples as well as mV. Thus, the process calibrator can be used for many thermometers and temperature displays with thermocouple connection.

- Simulation and measurement mode for thermocouples E, J, K, T, B, R, S, N, mV
- 24V supply for current loops
- HART compatible
- continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RS 27

Rigid industrial borescope for visual inspection in small and narrow holes and cavities. With a diameter of 2.7 mm / 0.11 in and a length of 175 mm / 6.9 in this rigid borescope is very versatile. The integrated LED lamp allows for a very good illumination of cavities to be inspected. The robust and compact design of this type of industrial borescope is very good for use in routine inspections in various industries as in the automotive industry.


- Diameter 2.7 mm / 0.11 in
- Useful length 175 mm / 6.9 in
- LED lighting
- Battery operation

 

Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TTC 30
The temperature data logger PCE-TTC 30 can be used to simulate different thermocouples as well as mV. Thus, the temperature data logger can be used for many thermometers and temperature displays with thermocouple connection.

- Simulation and measurement mode for thermocouples E, J, K, T, B, R, S, N, mV
- 24V supply for current loops
- HART compatible
- continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-TTC 30
The thermocouple calibrator PCE-TTC 30 can be used to simulate different thermocouples as well as mV. Thus, the thermocouple calibrator can be used for many thermometers and temperature displays with thermocouple connection. You can buy the thermocouple calibrator PCE-TTC 30 here in our online shop.

- Simulation and measurement mode
for thermocouples E, J, K, T, B, R, S, N, mV
- 24V supply for current loops
- HART compatible
- continuity test
- Data logger function
Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

Three-Phase Digital Multimeter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GPA 62

Three-Phase Electrical Tester with network analyzer / power and energy meter with data logger.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Manufacturer: PCE Instruments
US$ 865.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2500N-ICA

PCE-2500N-ICA is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

- Measuring principle: Leeb Rebound method
- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
- Accuracy: ± 0.5%; Repeatability: ± 0.8%
Type D impact device
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
US$ 859.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-900

The Leeb Hardness Test Instrument PCE-900 measures the hardness of nine different metals using the Leeb rebound method. This means that with the hardness test instrument a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The hardness test instrument PCE-900 measures the metal hardness in 6 different hardness scales. 

- Measurement according to Leeb Rebound method
- Testing of HRC, HRB, HV, HB, HSD
- Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
- Accuracy: 0.80% / Repeatability: 1.10%
Incl. type D Leeb probe 
Incl. ISO calibration certificate 
- Optional Software Available

Manufacturer: PCE Instruments
US$ 859.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2500N-ICA

PCE-2500N-ICA is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

- Measuring principle: Leeb Rebound method
- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
- Accuracy: ± 0.5%; Repeatability: ± 0.8%
Type D impact device
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
US$ 859.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-900

The Leeb Material Hardness Tester PCE-900 measures the hardness of nine different metals using the Leeb rebound method. This means that with the material hardness tester a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The Material Hardness Tester PCE-900 measures the metal hardness in 6 different hardness scales. 

- Measurement according to Leeb Rebound method
- Testing of HRC, HRB, HV, HB, HSD
- Measurement Range: 200-900 HLD / 13-99 HRB / 20-68 HRC / 20-655 HB / 80-940 HV / 32-99 HSD
- Accuracy: 0.80% / Repeatability: 1.10%
Incl. type D Leeb probe 
Incl. ISO calibration certificate 
- Optional Software Available

Manufacturer: PCE Instruments
US$ 859.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-2500N-ICA

PCE-2500N-ICA is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

- Measuring principle: Leeb Rebound method
- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
- Accuracy: ± 0.5%; Repeatability: ± 0.8%
Type D impact device
- Includes ISO calibration certificate

Manufacturer: PCE Instruments
US$ 859.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer