Technical Support

Technical advice

Monday - Friday
9 am - 5 pm ET

(561) 320-9162

2 Years Warrenty 2 Years Warrenty

2-Year Warranty

All PCE-Brand Devices Include a 2-Year Warranty Against Manufacturer Defects

  1. You are here:
  2. Home
  3. Query results
Automotive Tester PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Car Measuring Device PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Coating Thickness Gauge PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Force Gage PCE-N50F
US$ 904.00
ex. VAT, ex. delivery costs
The force gage is suitable for panel mounting. This force gage can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gage.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Details
Force Gauge PCE-N50F
US$ 904.00
ex. VAT, ex. delivery costs
The force gauge is suitable for panel mounting. This force gauge can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gauge.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Details
Material Tester PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Material Thickness Meter PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Paint Gauge PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Paint Thickness Tester PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Panel Meter PCE-N50F
US$ 904.00
ex. VAT, ex. delivery costs
The panel meter is suitable for panel mounting. This panel meter can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the panel meter.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Details
Surface Tester PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Thickness Gauge PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Thickness Meter PCE-CT 80-FN0D5
US$ 904.00
ex. VAT, ex. delivery costs
The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Details
Electrical Tester PCE-MO 2006
US$ 896.00
ex. VAT, ex. delivery costs
The electrical tester is a compact and precise measuring device with 5 selectable scale ranges for measuring resistances. By using the 4-wire measuring method for mΩ measurements, the electrical tester guarantees accurate and reliable results, even with the smallest resistances.

- Measuring range: 0 mΩ ... 2,000 Ω
- Accuracy: ± 0.8 % of Mw.
- Resolution: 0.1 mΩ
- 5 selectable measuring ranges
- Test current: 1 mA, 10 mA, 100 mA
- Internal memory
Details
Milliohmmeter PCE-MO 2006
US$ 896.00
ex. VAT, ex. delivery costs
The milliohmmeter is a compact and precise measuring device with 5 selectable scale ranges for measuring resistances. By using the 4-wire measuring method for mΩ measurements, the milliohmmeter guarantees accurate and reliable results, even with the smallest resistances.

- Measuring range: 0 mΩ ... 2,000 Ω
- Accuracy: ± 0.8 % of Mw.
- Resolution: 0.1 mΩ
- 5 selectable measuring ranges
- Test current: 1 mA, 10 mA, 100 mA
- Internal memory
Details
Closing Force Measuring Device BIA Class 2 for bus doors
US$ 895.00
ex. VAT, ex. delivery costs
ISO Calibration
The original BIA class 2 is a mechanical closing force measuring device for bus doors. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments.

- Measuring range and sensor must be selected!
- Stiffness: 10 N/mm or 25 N/mm depends on the sensor selection
- Accuracy: +/- 10 N or 5% of reading
- Measuring principle: slave pointer
- Precise measurements
- Easy to use
- Standards and directives: 2001 85 EC
- incl. ISO calibration certificate
Details
PCE-TDS 200 MR SENSOR On Rail sensors for the Ultrasonic Flow Meter
US$ 892.00
ex. VAT, ex. delivery costs
Separate on-rail sensors for pipe sizes DN 50 ... 700 / 57 ... 720 mm. The temperature resistance is between -30 ... 160 °C. The sensor on the respective rail is located on a rail and can therefore be positioned appropriately.

Magnets are located underneath the rails which enable it to hold on to pipes with a ferrous metal by itself.

- Pipe sizes: DN 50 ... 700 / 57 ... 720 mm / 1.9 ... 27.5 / 2.2 ... 28.3"
- Temperature resistance: -30 ... 160 °C / -22 ... 320 °F

- Important! If you order the sensor at a later date, we require the PCE-TDS 200 hand-held unit,
   in order to match the sensor to the hand-held unit!
Details
Test stand STAND-PCE-DDx10
US$ 888.00
ex. VAT, ex. delivery costs

Test stand for PCE-DDx series durometers. The test stand can be used to mount the durometers. The test stand allows precise positioning of the probe on the test object. 

- Test stand for mounting of the PCE-DDx durometers

Details