Belt Tension Meter PCE-BTM 2000L
US$ 805.00
ex. VAT, ex. delivery costs

The belt tension meter is an optical measuring instrument for determining the belt tension force. This belt tension meter consists of a display unit and a sensor on a gooseneck cable. The belt tension meter measures the tension of the belt in a stationary state.

  • Measures the oscillation frequency of the belt
  • Measuring range: 10 … 900 Hz
  • Accuracy: ± (1% of rdg. + 4 digits)
  • Resolution: <100 Hz: 0.1 Hz                       >100 Hz: 1 Hz
  • Memory for 750 measured values
  • Length of gooseneck sensor 25 cm / 9,8 in

Checkweighing Scale PCE-SD 150C
US$ 805.00
ex. VAT, ex. delivery costs
Verification for Trade / conformity assessment

The industrial scales PCE-SD 150C are low-cost robust verifiable system balances. The calibration of the industrial scales is according to the trading class M III. The sturdy foundation of the industrial scales is made of painted steel and features a plastic-coated steel platform.


  • Weighing capacity: 150 kg
  • Readability: 50 g
  • Minimum load: 1 kg
  • Platform size: 400 x 500 mm
  • Certifiable: M III

Checkweighing Scale PCE-SD 60C
US$ 805.00
ex. VAT, ex. delivery costs
Verification for Trade / conformity assessment

The checkweighing scale is a low-cost robust verifiable system balances. The calibration of the checkweighing scale is according to the trading class M III. The sturdy foundation of the checkweighing scale is made of painted steel and features a plastic-coated steel platform.


  • Weighing capacity: 60 kg
  • Readability: 20 g
  • Minimum load: 400 g
  • Platform size: 400 x 500 mm
  • Certifiable: M III

Condition Monitoring / Belt Tension Meter PCE-BTM 2000L
US$ 805.00
ex. VAT, ex. delivery costs
The belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

  • Measures the oscillation frequency of the belt
  • Measuring range: 10 … 900 Hz
  • Accuracy: ± (1% of rdg. + 4 digits)
  • Resolution: <100 Hz: 0.1 Hz
                         >100 Hz: 1 Hz
  • Memory for 750 measured values
  • Length of gooseneck sensor 25 cm / 9,8 in
Force Gage PCE-BTM 2000L
US$ 805.00
ex. VAT, ex. delivery costs
The Force Gage is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

  • Measures the oscillation frequency of the belt
  • Measuring range: 10 … 900 Hz
  • Accuracy: ± (1% of rdg. + 4 digits)
  • Resolution: <100 Hz: 0.1 Hz                       >100 Hz: 1 Hz
  • Memory for 750 measured values
  • Length of gooseneck sensor 25 cm / 9,8 in
Force Gauge / Belt Tension Meter PCE-BTM 2000L
US$ 805.00
ex. VAT, ex. delivery costs

The force gauge / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

  • Measures the oscillation frequency of the belt
  • Measuring range: 10 … 900 Hz
  • Accuracy: ± (1% of rdg. + 4 digits)
  • Resolution: <100 Hz: 0.1 Hz                       >100 Hz: 1 Hz
  • Memory for 750 measured values
  • Length of gooseneck sensor 25 cm / 9,8 in

Gloss Meter PCE-GM 80
US$ 805.00
ex. VAT, ex. delivery costs
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
Legal for Trade Scale PCE-SD 60C
US$ 805.00
ex. VAT, ex. delivery costs
Verification for Trade / conformity assessment

The legal for trade scale is a low-cost robust verifiable system balance. The calibration of the legal for trade scale is according to the trading class M III. The sturdy foundation of the legal for trade scale is made of painted steel and features a plastic-coated steel platform.


  • Weighing capacity: 60 kg
  • Readability: 20 g
  • Minimum load: 400 g
  • Platform size: 400 x 500 mm
  • Certifiable: M III

NDT Test Meter / Belt Frequency Meter PCE-BTM 2000L
US$ 805.00
ex. VAT, ex. delivery costs
The belt frequency meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The tension meter measures the tension of the belt in a stationary state.

  • Measures the oscillation frequency of the belt
  • Measuring range: 10 … 900 Hz
  • Accuracy: ± (1% of rdg. + 4 digits)
  • Resolution: <100 Hz: 0.1 Hz
                         >100 Hz: 1 Hz
  • Memory for 750 measured values
  • Length of gooseneck sensor 25 cm / 9,8 in
NDT Tester - Gloss Meter PCE-GM 80
US$ 805.00
ex. VAT, ex. delivery costs

The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB

Paint Gloss Tester PCE-GM 80
US$ 805.00
ex. VAT, ex. delivery costs
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
Surface Testing - Gloss Meter PCE-GM 80
US$ 805.00
ex. VAT, ex. delivery costs

The surface testing gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB

Paint Thickness Tester PCE-TG 120
US$ 798.00
ex. VAT, ex. delivery costs

The Ultrasonic Thickness Gauge PCE-TG120 is a very easy-to-use wall thickness gauge for all materials. This ultrasonic thickness gauge works to accurately measure the material thickness / wall thickness with ultrasound.

- Measurement range: 1 mm ... 30 mm / 0.04 in ... 1.18 in (displays in mm only)
- Resolution: 0.1 mm / 3.94 mil
- Accuracy: ± 0.1 mm 
- Integrated test block

Material Thickness Meter PCE-TG 120
US$ 798.00
ex. VAT, ex. delivery costs

The material thickness meter PCE-TG120 is a very easy-to-use wall thickness gauge for all materials. This material thickness meter works to accurately measure the material thickness / wall thickness with ultrasound.

- Measurement range: 1 mm ... 30 mm / 0.04 in ... 1.18 in  (displays in mm only)
- Resolution: 0.1 mm / 3.94 mil
- Accuracy: ± 0.1 mm 
- Integrated test block

Ultrasonic Thickness Tester PCE-TG 120
US$ 798.00
ex. VAT, ex. delivery costs

The Ultrasonic Thickness Tester PCE-TG120 is a very easy-to-use wall thickness gauge for all materials. This ultrasonic thickness tester works to accurately measure the material thickness / wall thickness with ultrasound.

- Measurement range: 1 mm ... 30 mm / 0.04 in ... 1.18 in (displays in mm only)
- Resolution: 0.1 mm / 3.94 mil
- Accuracy: ± 0.1 mm 
- Integrated test block

Ultrasonic Thickness Gauge PCE-TG 120
US$ 798.00
ex. VAT, ex. delivery costs

The Ultrasonic Thickness Gauge PCE-TG120 is a very easy-to-use wall thickness gauge for all materials. This ultrasonic thickness gauge works to accurately measure the material thickness / wall thickness with ultrasound.

- Measurement range: 1 mm ... 30 mm / 0.04 in ... 1.18 in (displays in mm only)
- Resolution: 0.1 mm / 3.94 mil
- Accuracy: ± 0.1 mm 
- Integrated test block

Wall Thickness Meter PCE-TG 120
US$ 798.00
ex. VAT, ex. delivery costs

The wall thickness meter is a very easy-to-use wall thickness gauge for all materials. This wall thickness meter works to accurately measure the material thickness / wall thickness with ultrasound.

- Measurement range: 1 mm ... 30 mm / 0.04 in ... 1.18 in  (displays in mm only)
- Resolution: 0.1 mm / 3.94 mil
- Accuracy: ± 0.1 mm 
- Integrated test block

Thickness Meter PCE-TG 120
US$ 798.00
ex. VAT, ex. delivery costs

The thickness meter PCE-TG120 is a very easy-to-use wall thickness gauge for all materials. This thickness meter works to accurately measure the material thickness / wall thickness with ultrasound.


- Measurement range: 1 mm ... 30 mm / 0.04 in ... 1.18 in (displays in mm only)
- Resolution: 0.1 mm / 3.94 mil
- Accuracy: ± 0.1 mm 
- Integrated test block