The PCE-228WINE water analysis meter is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the water analysis meter to a PC via the RS-232 interface.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Especially for wine, beer and other solutions with low conductivity

The PCE-228WINE pH meter is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the pH meter to a PC via the RS-232 interface.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Especially for wine, beer and other solutions with low conductivity

ABBE-REF 1 is a high-precision Abbe refractometer for the accurate measurement of refractive indexes (nD), sucrose or sugar contents (% Brix) and mean dispersion values (nF-nC) of transparent and translucent liquids and substances. This bench-top Abbe refractometer can be used to determine refractive indexes in a temperature range from 0 ... +70 ºC (temperature control included).

Measurement ranges:
  1.300 ... 1.700 nD / 0.0 ... 95 % Brix
- Scale division: 0.0005 nD / 0.25 % Brix
- Resolution and accuracy: 0.0002 nD / 0.1 % Brix

The Durometer is a handy, digital measuring device for measuring tensile and compressive forces. The Durometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 10 N
- Resolution: 0,002 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

- Measuring range: 0 ... 10 N
- Resolution: 0,002 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

The force gauge is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

- Measuring range: 0 ... 10 N
- Resolution: 0,002 N
- Accuracy: ± 0.3% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

ABBE-REF 1 is a high-precision Abbe refractometer for the accurate measurement of refractive indexes (nD), sucrose or sugar contents (% Brix) and mean dispersion values (nF-nC) of transparent and translucent liquids and substances. This bench-top Abbe refractometer can be used to determine refractive indexes in a temperature range from 0 ... +70 ºC (temperature control included).

- Measurement ranges: 1.300 ... 1.700 nD / 0.0 ... 95 % Brix
- Scale division: 0.0005 nD / 0.25 % Brix
- Resolution and accuracy: 0.0002 nD / 0.1 % Brix

 

The belt tension meter is an optical measuring instrument for determining the belt tension force. This belt tension meter consists of a display unit and a sensor on a gooseneck cable. The belt tension meter measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm

The force gauge / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm

The swimming pool pH meter kit is a very easy to use measuring device for determining the pH value in various liquids. With the help of the BNC connection of the pH meter, various pH electrodes can also be connected to the pH meter. The turbidity meter is a handy meter with a large display that meets all the requirements for on-site turbidity measurement.

- Measuring range: 0.00 ... 14.00 pH
- Measurement accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
- Resolution: 0.01 pH
- Exchangeable electrode through BNC connection
- Device kit for outdoor swimming pools
- Incl. turbidity meter PCE-TUM 20
- Measuring range: 0.00 to 50.0 NTU and 50 to 1000 NTU
- Resolution: 0.01 and 1 NTU

- Pipe sizes: DN 15 ... 100 / 20 ... 108 mm / 0.6 ... 3.9 / 0.7 ... 4.2"

- Important! If you order the sensor at a later date, we require the PCE-TDS 200 hand-held unit,
   in order to match the sensor to the hand-held unit!

The pressure transmitter PCE-DMU 40 can be used for relative and absolute pressure measurements. The pressure transmitter can be used for gases, water as well as fuels and oils.

 

- max. 600 Bar
- Media: gases, water as well as fuels and oil
- Output: 4 ... 20 mA / 0 ... 10 V (selectable)
- Pressure type: Absolute or Relative (selectable)
- Membrane: stainless steel
- Accuracy: 0.1 % / 0.25 % FSO

The thickness meter PCE-TG 110 is a thickness gauge with external high-temperature probe for ferrous and non-ferrous metals etc. The PCE-TG 110 is an ideal thickness meter for water pipes, steam pipes and pipes for chemicals. 

- Measurement range: 2.5 mm ... 200 mm / 0.10 in ... 7.87 in  (displays in mm only)
- Suitable for homogeneous materials such as metals, glass, ...
- Including special coated 5 MHz probe (usable up to 400°C / 752°F)
- External sensor

 

The material thickness meter PCE-TG 110 is a thickness gauge with external high-temperature probe for ferrous and non-ferrous metals etc. The PCE-TG 110 is an ideal material thickness meter for water pipes, steam pipes and pipes for chemicals.

- Measurement range: 2.5 mm ... 200 mm / 0.10 in ... 7.87 in (displays in mm only)
- Suitable for homogeneous materials such as metals, glass, ...
- Including special coated 5 MHz probe (usable up to 400°C / 752°F)
- External sensor

The Ultrasonic Thickness Tester PCE-TG 110 is a thickness gauge with external high-temperature probe for ferrous and non-ferrous metals etc. The PCE-TG 110 is an ideal ultrasonic thickness tester for water pipes, steam pipes and pipes for chemicals.

- Measurement range: 2.5 mm ... 200 mm / 0.10 in ... 7.87 in (displays in mm only)
- Suitable for homogeneous materials such as metals, glass, ...
- Including special coated 5 MHz probe (usable up to 400°C / 752°F)
- External sensor