Vehicle Weighing Pads PCE-WWSC15T-S4
US$ 8,127.00
ex. VAT, ex. delivery costs

The vehicle weighing pads fulfill the measuring accuracy of class III described in 2009/23 / EG. The vehicle weighing pads are delivered in calibrated form and, thanks to the proof of measurement accuracy, comply with the SOLAS regulation for weighing containers with 4 support points.

  • Weighing range up to max. 50t (12.5t per corner)
  • 10 m / 32.8 ft cable connection
  • 4 platforms each 500 x 400 x 58 mm / 19.6 x 15.7 x 2.2"
  • Including calibration certificate / certificate of conformity

Legal for Trade Balance PCE-SD 300 SST
US$ 8,085.00
ex. VAT, ex. delivery costs
Verification for Trade / conformity assessment
The legal for trade balance is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The legal for trade balance is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III
Trade Approved Scale PCE-SD 300 SST
US$ 8,085.00
ex. VAT, ex. delivery costs
Verification for Trade / conformity assessment
The trade approved scale is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel trade approved scale is made of solid corrosion and acid-resistant steel.

  • Weighing range: 300 kg
  • Readability: 0.1 kg
  • Calibration included
  • Verifiable M III
Weighbridge PCE-SD 300 SST
US$ 8,085.00
ex. VAT, ex. delivery costs
Verification for Trade / conformity assessment
The weighbridge is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel weighbridge is made of solid corrosion and acid-resistant steel.

  • Weighing range: 300 kg
  • Readability: 0.1 kg
  • Calibration included
  • Verifiable M III
Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
US$ 7,966.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

  • Operating frequency: 60 kHz
  • Sine wave probe: Ø 14 mm / ≈ 0.55 in 
  • Memory: Up to 500 groups of measurements
  • Lift-off and temperature compensation
  • Automatic calibration
  • incl. ISO Calibration Certificate

Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
US$ 7,966.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

  • Operating frequency: 60 kHz
  • Sine wave probe: Ø 14 mm / ≈ 0.55 in 
  • Memory: Up to 500 groups of measurements
  • Lift-off and temperature compensation
  • Automatic calibration
  • incl. ISO Calibration Certificate

NDT Test Instruments PCE-COM 20-ICA incl. ISO Calibration Certificate
US$ 7,966.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

  • Operating frequency: 60 kHz
  • Sine wave probe: Ø 14 mm / ≈ 0.55 in 
  • Memory: Up to 500 groups of measurements
  • Lift-off and temperature compensation
  • Automatic calibration
  • incl. ISO Calibration Certificate

Surface Testing - Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Cal.
US$ 7,966.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive surface testing - conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

  • Operating frequency: 60 kHz
  • Sine wave probe: Ø 14 mm / ≈ 0.55 in 
  • Memory: Up to 500 groups of measurements
  • Lift-off and temperature compensation
  • Automatic calibration
  • incl. ISO Calibration Certificate

Aerosol meter PCE-PQC 20EU Incl. Calibration Certificate
US$ 7,861.00
ex. VAT, ex. delivery costs
ISO Calibration
The Aerosol meter PCE-PQC 20EU is very well suited for monitoring and checking of clean rooms, filter systems in operating rooms and filling systems in the pharmaceutical industry. The stored data records from the Aerosol meter can be read out and processed via the supplied software via Ethernet, USB or Wifi. 

  • Measuring range: 0.3 … 25 μm
  • Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
  • Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
  • Ethernet, USB
  • Incl. temperature and humidity sensor
  • Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921