Industrial Measurement Products and Solutions
Order no.: PCE-NDL 10

The data logging condition monitoring device is used to determine volume. The PCE-NDL 10 data logging condition monitoring device is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data logging condition monitoring device has an SD card slot that enables the use of an SD card as an additional storage medium.


- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Selectable storage interval
- Backlit LC display
- Dose measurement or SPL measurement

Manufacturer: PCE Instruments
US$ 711.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-BTM 2000
The belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                      >100 Hz: 1 Hz
- Memory for 750 measured values
- Sensor on gooseneck
Manufacturer: PCE Instruments
US$ 710.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-123-ICA

PCE-123 is a current calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use current calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the current calibrator useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 710.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-123-ICA

PCE-123 is a digital multimeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multimeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multimeter useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 710.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-123-ICA

PCE-123 is a electrical tester used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use electrical tester provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the electrical tester useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 710.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-BTM 2000
The belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The force gauge measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                      >100 Hz: 1 Hz
- Memory for 750 measured values
- Sensor on gooseneck
Manufacturer: PCE Instruments
US$ 710.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-123-ICA

PCE-123 is a multifunction calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multifunction calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multifunction calibrator useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 710.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-BTM 2000
The belt frequency meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The tension meter measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                      >100 Hz: 1 Hz
- Memory for 750 measured values
- Sensor on gooseneck
Manufacturer: PCE Instruments
US$ 710.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-123-ICA

PCE-123 is a process calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use process calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the process calibrator useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 710.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-123-ICA

PCE-123 is a voltage calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use voltage calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the voltage calibrator useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
US$ 710.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LES 100-ICA

The PCE-LES 100-ICA automotive tester combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the automotive tester does not need periodic changing of bulbs. The automotive tester is sent to you calibrated (by the manufacturer PCE Instruments).


- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- 2 bright LEDs (1400 lux @ 50 cm)
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

Manufacturer: PCE Instruments
US$ 704.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LES 100-ICA

The PCE-LES 100-ICA handheld tachometer combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the handheld tachometer does not need periodic changing of bulbs. The handheld tachometer is sent to you calibrated (by the manufacturer PCE Instruments).


- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- 2 bright LEDs (1400 lux @ 50 cm)
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

Manufacturer: PCE Instruments
US$ 704.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LES 100-ICA

The PCE-LES 100-ICA Stroboscope combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the stroboscope does not need periodic changing of bulbs. The stroboscope is sent to you calibrated (by the manufacturer PCE Instruments).


- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- 2 bright LEDs (1400 lux @ 50 cm)
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

Manufacturer: PCE Instruments
US$ 704.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LES 100-ICA

The PCE-LES 100-ICA tachometer combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the tachometer does not need periodic changing of bulbs. The tachometer is sent to you calibrated (by the manufacturer PCE Instruments).


- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- 2 bright LEDs (1400 lux @ 50 cm)
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

Manufacturer: PCE Instruments
US$ 704.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-LES 100-ICA

The PCE-LES 100-ICA condition monitoring tachometer combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the condition monitoring tachometer does not need periodic changing of bulbs. The condition monitoring tachometer is sent to you calibrated (by the manufacturer PCE Instruments).


- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- 2 bright LEDs (1400 lux @ 50 cm)
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

Manufacturer: PCE Instruments
US$ 704.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... 60°C / 14 ... 140°F, and dew point from -55 ... 60°C / -67 ... 140°F. Affording a large graphic display and multi-language menu, the easy-to-use RH5.


- Measuring range 0...100% rH, -10 ... 60°C / 14 ... 140°F
- Offers an accuracy of ± 1.5% r.h. and ± 0.1%°C / 0.3°F
- Supplied with a 295 mm / 11.6 in aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
US$ 699.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... 60°C / 14 ... 140°F, and dew point from -55 ... 60°C / -67 ... 140°F. Affording a large graphic display and multi-language menu, the easy-to-use RH5.


- Measuring range 0...100% rH, -10 ... 60°C / 14 ... 140°F
- Offers an accuracy of ± 1.5% r.h. and ± 0.1%°C / 0.3°F
- Supplied with a 295 mm / 11.6 in aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
US$ 699.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... 60°C / 14 ... 140°F, and dew point from -55 ... 60°C / -67 ... 140°F. Affording a large graphic display and multi-language menu, the easy-to-use RH5.


- Measuring range 0...100% rH, -10 ... 60°C / 14 ... 140°F
- Offers an accuracy of ± 1.5% r.h. and ± 0.1%°C / 0.3°F
- Supplied with a 295 mm / 11.6 in aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
US$ 699.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... 60°C / 14 ... 140°F, and dew point from -55 ... 60°C / -67 ... 140°F. Affording a large graphic display and multi-language menu, the easy-to-use RH5.


- Measuring range 0...100% rH, -10 ... 60°C / 14 ... 140°F
- Offers an accuracy of ± 1.5% r.h. and ± 0.1%°C / 0.3°F
- Supplied with a 295 mm / 11.6 in aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
US$ 699.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... 60°C / 14 ... 140°F, and dew point from -55 ... 60°C / -67 ... 140°F. Affording a large graphic display and multi-language menu, the easy-to-use RH5.


- Measuring range 0...100% rH, -10 ... 60°C / 14 ... 140°F
- Offers an accuracy of ± 1.5% r.h. and ± 0.1%°C / 0.3°F
- Supplied with a 295 mm / 11.6 in aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
US$ 699.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer