Query results | PCE Instruments

US$ 659.00

ex. VAT, ex. delivery costs

With the radiation detector PCE-EMF 40, it is possible to measure magnetic fields up to 2000 mG directly. At the same time, the radiation detector shows the strength of the magnetic field numerically using an X, Y and Z axis.

- Measuring ranges: 20.00 ... 200.0 µT / 200.0 ... 2000 mG
- Bandwidth: 50 MHz ... 3.5 GHz
- Units: V / m, mV / m, V / m, µW / cm², µW / m², mW / m², mA / m

Radiation Detector PCE-MFM 3500

US$ 659.00

ex. VAT, ex. delivery costs

The radiation detector is a reliable measuring device for measuring the existing magnetic field. This radiation detector is The gauss meter is suitable for measuring both static/permanent magnet (DC) and alternating magnetic (AC) fields.

- Measuring range up to 30,000 G
- DC Milli Tesla, DC Gauss
- AC Milli Tesla, AC Gauss, frequency from 40 to 500 Hz
- Temperature sensor
- Switchable AC or DC measurement
- Memory: Manual / Automatic

Radioactivity Meter PCE-EMF 40

US$ 659.00

ex. VAT, ex. delivery costs

With the gauss radioactivity, it is possible to measure magnetic fields up to 2000 mG directly. At the same time, the radioactivity meter shows the strength of the magnetic field numerically using an X, Y and Z axis.

- Measuring ranges: 20.00 ... 200.0 µT / 200.0 ... 2000 mG

- Bandwidth: 50 MHz ... 3.5 GHz

- Units: V / m, mV / m, V / m, µW / cm², µW / m², mW / m², mA / m

Radioactivity Meter PCE-MFM 3500

US$ 659.00

ex. VAT, ex. delivery costs

The radioactivity meter is a reliable measuring device for measuring the existing magnetic field. This radioactivity meter is suitable for measuring both static/permanent magnet (DC) and alternating magnetic (AC) fields.

- Measuring range up to 30,000 G
- DC Milli Tesla, DC Gauss, Transverse Probe
- AC Milli Tesla, AC Gauss, frequency from 40 to 500 Hz
- Temperature sensor
- Switchable AC or DC measurement
- Memory: Manual / Automatic

Relative Humidity Meter PCE-HMM 50

US$ 659.00

ex. VAT, ex. delivery costs

The hay relative humidity meter PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay relative humidity meter features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay relative humidity meter proves to be extremely robust, designed to withstand applications for many years.

- Measuring lance: 50 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

Surface pH Meter PCE-228SF

US$ 659.00

ex. VAT, ex. delivery costs

The surface pH meter PCE-228SF is used to measure the pH on surfaces such as paper, cardboard, leather, textiles and skin. The special pH electrode of the pH meter is particularly flat and made of epoxy, which makes it particularly resistant to impact. The pH meter can also be used to measure very small sample volumes from 0.1 ml upwards. For this, a special measuring cuvette is supplied.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- pH meter for surfaces

Temperature Meter PCE-HMM 50

US$ 659.00

ex. VAT, ex. delivery costs

The Temperature Meter PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The Temperature Meter features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The Temperature Meter proves to be extremely robust, designed to withstand applications for many years.

- Measuring lance: 50 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

Thermo Hygrometer PCE-HMM 50

US$ 659.00

ex. VAT, ex. delivery costs

The hay thermo hygrometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay thermo hygrometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay thermo hygrometer proves to be extremely robust, designed to withstand applications for many years.

- Measuring lance: 50 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

Thermometer PCE-HMM 50

US$ 659.00

ex. VAT, ex. delivery costs

The hay thermometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay thermometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay thermometer proves to be extremely robust, designed to withstand applications for many years.

- Measuring lance: 50 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

Differential Pressure Gauge PCE-910-ICA Incl. ISO Calibration Certificate

US$ 655.00

ex. VAT, ex. delivery costs

PCE-910 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Differential Pressure Manometer PCE-910-ICA Incl. ISO Calibration Certificate

US$ 655.00

ex. VAT, ex. delivery costs

PCE-910 is a portable handheld digital differential pressure manometer, meter or gauge used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Differential Pressure Meter PCE-910-ICA Incl. ISO Calibration Certificate

US$ 655.00

ex. VAT, ex. delivery costs

PCE-910 is a portable handheld digital differential pressure meter, gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Differential Pressure Vacuum Gauge PCE-910-ICA Incl. ISO Calibration Certificate

US$ 655.00

ex. VAT, ex. delivery costs

PCE-910 is a portable handheld digital differential pressure vacuum gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

HVAC Meter PCE-910-ICA Differential Pressure Incl. ISO Calibration Certificate

US$ 655.00

ex. VAT, ex. delivery costs

PCE-910 is a portable handheld HVAC Meter, digital differential pressure gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Pressure Meter PCE-910-ICA Incl. ISO Calibration Certificate

US$ 655.00

ex. VAT, ex. delivery costs

Class 1 Sound Level Calibrator PCE-SC 09

US$ 654.00

ex. VAT, ex. delivery costs

The Class I Sound Level Calibrator is a battery powered sound source. With the Class I sound level calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out.

- Sound pressure level: 94 dB, 114 dB
- Accuracy class: IEC 942, class 1
- Accuracy sound level: ± 0.3 dB (20°C / 68°C, 760 mm / 30 in Hg)
- Frequency: 1000 Hz for A, B, C and D frequency weighting

Class 1 Sound Level Meter Calibrator PCE-SC 09

US$ 654.00

ex. VAT, ex. delivery costs

The Class I Sound Level Meter Calibrator is a battery powered sound source. With the Class I sound calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out.

Class I Decibel Meter Calibrator PCE-SC 09

US$ 654.00

ex. VAT, ex. delivery costs

The Class I Decibel Meter Calibrator is a battery powered sound source. With the Class I sound calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out.