The Anemometer PCE-WSAC 50-121 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 0 ... 10 V
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-211 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 4 ... 20 mA
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-221 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 0 ... 10 V
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-311 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-321 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 0 ... 10 V
- Communication: RS485
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The automotive tester / borescope is an inspection camera for non-destructive measurements. Thus the automotive tester / borescope is the ideal instrument for diagnosis in hard-to-reach places. Mechanical engineering, sanitary and heating engineering and the entire building and construction industry are among the main areas of application for the automotive tester / borescope.

- Camera head diameter: Ø 9 mm / 0.4"
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Storage: Micro SD card
- Front and side view cameras

The car measuring device is an inspection camera for non-destructive measurements. Thus the car measuring device is the ideal instrument for diagnosis in hard-to-reach places. Mechanical engineering, sanitary and heating engineering and the entire building and construction industry are among the main areas of application for the car measuring device.

- Camera head diameter: Ø 9 mm / 0.4"
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Storage: Micro SD card
- Front and side view cameras

The environmental meter is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The environmental meter is equipped with various sensors.

Parameters / Measuring ranges:
- Temperature: 0 ... +50 ºC / 32 ... 122 ºF
- Ambient humidity: 0 ... 100% RH
- Atmospheric pressure: 300 ... 2000 hPa
- CO2: 0 ... 40000 ppm
- 32 GB data storage
- E-paper display with histogram display
- Good / medium / bad rating
- Battery life: approx. 10 months
- incl. ISO calibration certificate

The environmental meter with a pitot tube that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile environmental meter. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-

- Measures air velocities up to 80 m/s / 262 ft/s, 2.24 ... 178.66 MPH  
- Zero, minimum, maximum, average, record and hold functions
- Stores to memory up to 99 measurement values per parameter
- Includes ISO calibration certificate

The environmental tester is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The environmental tester is equipped with various sensors.

Parameters / Measuring ranges:
- Temperature: 0 ... +50 ºC / 32 ... 122 ºF
- Ambient humidity: 0 ... 100% RH
- Atmospheric pressure: 300 ... 2000 hPa
- CO2: 0 ... 40000 ppm
- 32 GB data storage
- E-paper display with histogram display
- Good / medium / bad rating
- Battery life: approx. 10 months
- incl. ISO calibration certificate

The environmental tester with a pitot tube that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile environmental tester. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-

- Measures air velocities up to 80 m/s / 262 ft/s, 2.24 ... 178.66 MPH  
- Zero, minimum, maximum, average, record and hold functions
- Stores to memory up to 99 measurement values per parameter
- Includes ISO calibration certificate

The PCE-HVAC 2 is a Flow Meter that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile Flow Meter. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-

- Measures air velocities up to 80 m/s / 262 ft/s, 2.24 ... 178.66 MPH  
- Zero, minimum, maximum, average, record and hold functions
- Stores to memory up to 99 measurement values per parameter
- Includes ISO calibration certificate

The HVAC meter is an inspection camera for non-destructive measurements. Thus the HVAC meter is the ideal instrument for diagnosis in hard-to-reach places. Mechanical engineering, sanitary and heating engineering and the entire building and construction industry are among the main areas of application for the HVAC meter.

- Camera head diameter: Ø 9 mm / 0.4"
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Storage: Micro SD card
- Front and side view cameras

The hygrometer is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The hygrometer is equipped with various sensors.

Parameters / Measuring ranges:
- Temperature: 0 ... +50 ºC / 32 ... 122 ºF
- Ambient humidity: 0 ... 100% RH
- Atmospheric pressure: 300 ... 2000 hPa
- CO2: 0 ... 40000 ppm
- 32 GB data storage
- E-paper display with histogram display
- Good / medium / bad rating
- Battery life: approx. 10 months
- incl. ISO calibration certificate

The industrial borescope is an inspection camera for non-destructive measurements. Thus the industrial borescope is the ideal instrument for diagnosis in hard-to-reach places. Mechanical engineering, sanitary and heating engineering and the entire building and construction industry are among the main areas of application for the industrial borescope.

- Camera head diameter: Ø 9 mm / 0.4"
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Storage: Micro SD card
- Front and side view cameras

The industrial borescope is an inspection camera for non-destructive measurements. Thus the industrial borescope is the ideal instrument for diagnosis in hard-to-reach places. Mechanical engineering, sanitary and heating engineering and the entire building and construction industry are among the main areas of application for the industrial borescope.

- Camera head diameter: Ø 9 mm / 0.4"
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Storage: Micro SD card
- Front and side view cameras

The inspection camera is for non-destructive measurements. Thus the inspection camera is the ideal instrument for diagnosis in hard-to-reach places. Mechanical engineering, sanitary and heating engineering and the entire building and construction industry are among the main areas of application for the inspection camera.

- Camera head diameter: Ø 9 mm / 0.4"
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Storage: Micro SD card
- Front and side view cameras

The PCE-HVAC 2 is a multifunction air flow meter with a pitot tube that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile air flow meter. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-

- Measures air velocities up to 80 m/s / 262 ft/s, 2.24 ... 178.66 MPH  
- Zero, minimum, maximum, average, record and hold functions
- Stores to memory up to 99 measurement values per parameter
- Includes ISO calibration certificate