Leak Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Material Tester PCE-UCD 100
US$ 6,593.00
ex. VAT, ex. delivery costs
The material testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative material testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
- Includes a camera for measuring crack width
- Bandwidth: 1 to 500 kHz
- Display: 10.1" TFT touchscreen display
- Internal storage: 8 GB
NDT Test Instruments PCE-UCD 100
US$ 6,593.00
ex. VAT, ex. delivery costs
The NDT test instrument sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative NDT test instrument not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
- Includes a camera for measuring crack width
- Bandwidth: 1 to 500 kHz
- Display: 10.1" TFT touchscreen display
- Internal storage: 8 GB
NDT Tester PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The NDT tester for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Paint Viscosity Tester Viscolite d15
US$ 6,593.00
ex. VAT, ex. delivery costs

Viscolite d15 is a portable resonant or vibrational viscometer used in industrial and research applications to measure viscosity in very small to large samples 10 ml / 10cc / 0.39 oz and up. Featuring a built-in thermometer and a nearly maintenance-free design with no openly rotating parts, this handheld viscometer is delivered with one 316L stainless steel measuring probe and displays measurements in centipoise (cP). The energy loss measurement during vibration yields very high accuracy in very small vessels.


- Uses resonant vibration to measure fluid viscosity
- Viscosity range: 0 ... 5,000 cP (mPa.S)
- Reproducibility is better than 1% 
- Small sample of only 10 cc required
- No moving parts to damage, easy cleanup, and virtually maintenance free 

 

Portable Viscometer Viscolite d15
US$ 6,593.00
ex. VAT, ex. delivery costs

Viscolite d15 is a portable resonant or vibrational viscometer used in industrial and research applications to measure viscosity in very small to large samples 10 ml / 10cc / 0.39 oz and up. Featuring a built-in thermometer and a nearly maintenance-free design with no openly rotating parts, this handheld viscometer is delivered with one 316L stainless steel measuring probe and displays measurements in centipoise (cP). The energy loss measurement during vibration yields very high accuracy in very small vessels.


- Uses resonant vibration to measure fluid viscosity
- Viscosity range: 0 ... 5,000 cP (mPa.S)
- Reproducibility is better than 1% 
- Small sample of only 10 cc required
- No moving parts to damage, easy cleanup, and virtually maintenance free 

 

Ultrasonic Leak Detector PCE-LDC 20
US$ 6,593.00
ex. VAT, ex. delivery costs
The ultrasonic leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Ultrasonic Tester / Ultrasonic Testing PCE-UCD 100
US$ 6,593.00
ex. VAT, ex. delivery costs
The ultrasonic tester / ultrasonic testing sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this ultrasonic tester / ultrasonic testing enables accurate verification of concrete piles, concrete beams, and other components. This innovative ultrasonic tester / ultrasonic testing not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
- Includes a camera for measuring crack width
- Bandwidth: 1 to 500 kHz
- Display: 10.1" TFT touchscreen display
- Internal storage: 8 GB
Vibration Analyzer PCE-VM 400B
US$ 6,593.00
ex. VAT, ex. delivery costs
The vibration analyzer is a technologically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The vibration analyzer has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

- 4 channels for measurement
- Measurement on shafts, bearings, motors, generators
- Piezoelectric acceleration sensors
- Wide frequency range: 1 ... 25000 Hz
- Acceleration: 0.001 ... 200 m/s²
- Velocity: 0.001 ... 200 mm/s
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- Evaluation according to ISO 10816
Vibration Meter PCE-VM 400B
US$ 6,593.00
ex. VAT, ex. delivery costs
The vibration meter is a technically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The vibration meter has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

- Wide frequency range: 1 ... 25000 Hz
- Acceleration: 0.001 ... 200 m/s²
- Velocity: 0.001 ... 200 mm/s
- Piezoelectric acceleration sensors
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- 4 channels for measurement
- Evaluation according to ISO 10816
Vibration Recorder PCE-VM 400B
US$ 6,593.00
ex. VAT, ex. delivery costs
The vibration recorder is a technically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The vibration recorder has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

4 channels for measurement
- Measurement on shafts, bearings, motors, generators
- Piezoelectric acceleration sensors
- Wide frequency range: 1 ... 25000 Hz
Acceleration: 0.001 ... 200 m/s²
Velocity: 0.001 ... 200 mm/s
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- Evaluation according to ISO 10816
Absolute Moisture Sensor PCE-MWM 240-A
US$ 6,588.00
ex. VAT, ex. delivery costs

Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

- Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Bulk Material Moisture Analyzer PCE-MWM 240-A
US$ 6,588.00
ex. VAT, ex. delivery costs

Designed specifically for use real-time measurement of percent moisture measurement of bulk materials. Material in flowing mass, such as granular materials, sand, sawdust, fly ash (mineral), wood chips (surface to 5 cm), grain, powders, seed, and pastes is continuously measurable. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. 

 

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

 

Humidity Detector PCE-MWM 240-A
US$ 6,588.00
ex. VAT, ex. delivery costs

Designed specifically for use in humidity measurement of bulk materials, this humidity detector is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

- Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

In-Process Bulk Material Moisture Meter PCE-MWM 240-A
US$ 6,588.00
ex. VAT, ex. delivery costs

Designed specifically for use in humidity measurement of bulk materials, this humidity sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output
Moisture Sensor PCE-MWM 240-A
US$ 6,588.00
ex. VAT, ex. delivery costs

Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output
Moisture Test Instrument PCE-MWM 240-A
US$ 6,588.00
ex. VAT, ex. delivery costs

Designed specifically for use in moisture measurement of various bulk materials, these moisture analyzing test instruments are installed in bins, silos, troughs, bunkers, distributors, augers, and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output
Outdoor Decibel Meter Kit PCE-430-EKIT
US$ 6,581.00
ex. VAT, ex. delivery costs

The Class 1 outdoor decibel meter PCE-430-EKIT with integrated data logger meets all requirements for noise measurement and frequency analysis. This integrated precision pulse outdoor decibel meter kit follows all valid standards and guidelines, and is designed for use outdoors in all weather. The typical applications for this instrument are the measurement of workplace noise, compliance, environmental noise detection, selection of hearing protector selection, selection of appropriate noise abatement measures and noise exposure estimation.

 

- Accuracy class 1 
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise