PCE-CT 50 is a Automotive Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm 

The SKM 1.0 Automotive Tester precisely measures closing forces to prevent personal injuries. The closing Automotive Tester is suitable for measuring forces in the field of automatic doors, windows, and cut off walls; such as in warehouses, general stores, and public offices. The Automotive Tester is delivered manufacturer calibrated and can optionally be certified to ISO standards.

- Measurement range: 1000 N
- Resolution: 1 N
- Accuracy: ± 3 N
- External load cell

PCE-CT 50 is a Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, copper,  brass, zinc, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm 

The SKM 1.0 Force Gauge precisely measures closing forces to prevent personal injuries. The closing Force Gauge is suitable for measuring forces in the field of automatic doors, windows, and cut off walls; such as in warehouses, general stores, and public offices. The Force Gauge is delivered manufacturer calibrated and can optionally be certified to ISO standards.

- Measurement range: 1000 N
- Resolution: 1 N
- Accuracy: ± 3 N
- External load cell

PCE-CT 50 is a Paint Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

PCE-CT 50 is a Surface Testing - Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

PCE-CT 50 is a Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

PCE-CT 50 is a Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils
  ±3.5 % of 1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

The PCE-LES 100 Automotive Meter combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the Automotive Meter does not need periodic changing of bulbs. The Automotive Meter is sent to you calibrated (by the manufacturer PCE Instruments).

- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

The PCE-LES 100 Rotation Meter combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the Rotation Meter does not need periodic changing of bulbs. The Rotation Meter is sent to you calibrated (by the manufacturer PCE Instruments).

- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

The PCE-LES 100 Handheld Tachometer combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the Handheld Tachometer does not need periodic changing of bulbs. The tachometer is sent to you calibrated (by the manufacturer PCE Instruments).

- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- 2 bright LEDs (1400 lux @ 50 cm)
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

The PCE-LES 100 Stroboscope combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the stroboscope does not need periodic changing of bulbs. The stroboscope is sent to you calibrated (by the manufacturer PCE Instruments).

- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- 2 bright LEDs (1400 lux @ 50 cm)
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

The PCE-LES 100 Tachometer combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the Tachometer does not need periodic changing of bulbs. The tachometer is sent to you calibrated (by the manufacturer PCE Instruments).

- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- 2 bright LEDs (1400 lux @ 50 cm)
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

The absolute moisture meter is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The absolute moisture meter determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw. 

- Fast moisture control
- Electrical resistance method
- For biomasses such as straw, hay, sawdust, etc.
- Sample size up to approx. 120 cm³

The Absolute Moisture Meter is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The Absolute Moisture Meter determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw.

- Fast moisture control
- Electrical resistance methods
- For biomasses such as straw, hay, sawdust, etc.
- Sample size up to approx. 120 cm³

The Moisture Tester for wood is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The Moisture Tester for wood determines the absolute moisture of sawdust and other types of biomass, such as Wood shavings, hay, straw.

- Fast moisture control
- Electrical resistance method
- For biomasses such as straw, hay, sawdust, etc.
- Sample size up to approx. 120 cm³

The Wood Moisture Meter is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The Wood Moisture Meter determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw.

- Fast moisture control
- Electrical resistance method
- For biomasses such as straw, hay, sawdust, etc.
- Sample size up to approx. 120 cm³

The Data Logger with microprocessor is a high precision 1-channel temperature gauge. The Data Logger with microprocessor is ideal for use with various Pt100 sensors. The temperature logging test instruments are manufacturer calibrated (ISO calibration certificate is included).

- High precision: ±2% r.H.
- 1 channel temperature Recorder
- Automatic shutdown
- Memory size: 5,000 values
- Sampling rate: 2/sec.
- Incl. ISO calibration certificate