Order no.: PCE-WSAC 50-921

The PCE-WSAC 50-921 air velocity meter is used in a multitude of wind monitoring situations. Besides the actual wind speed, the average wind speed across 120 seconds and 300 seconds is presented. The lightest of wind movement is detected by the air velocity meter, and the instrument can be helpful across the full spectrum of outdoor industries.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 0...10 V
- Interface: RS-485 modbus
- incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 612.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSAC 50-721

The prevailing wind speed and the mean wind speed (across two and five minutes) can be displayed by the PCE-WSAC 50-721 anemometer. The smallest of wind movement is detected by this convenient anemometer. The anemometer is used for a variety of wind monitoring applications in both outdoor industry and outdoor sports.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 230 V AC
- Signal input: 0...10 V
- Interface: RS-485 modbus
- incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 612.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSAC 50-821

The PCE-WSAC 50-821 anemometer can be successfully applied to various wind monitoring applications. The instrument clearly displays the prevailing wind speed and additionally the average wind speed over 2 and 5 minutes. The slightest of wind movement is detected by the anemometer. Aerospace, recycling plants and fruit production are some example areas that can benefit from the device.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 115 V AC
- Signal input: 0...10 V
- Interface: RS-485 modbus
- incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 612.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-WSAC 50-921

The PCE-WSAC 50-921 anemometer is used in a multitude of wind monitoring situations. Besides the actual wind speed, the average wind speed across 120 seconds and 300 seconds is presented. The lightest of wind movement is detected by the anemometer, and the instrument can be helpful across the full spectrum of outdoor industries.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 0...10 V
- Interface: RS-485 modbus
- incl. ISO calibration certificate

Manufacturer: PCE Instruments
US$ 612.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDA 10

The PCE-DDA 10 Shore A durometer is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).


- Portable handheld digital device
- For Shore A hardness testing
- Single and serial measurements
- Data transfer to PC

Manufacturer: PCE Instruments
US$ 612.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDD 10

The PCE-DDD 10 Shore D durometer is a portable handheld device used to check Shore D hardness in hard rubber and thermoplastic. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).


- Portable handheld digital device
- For Shore D hardness testing
- Single and serial measurements
- Data transfer to PC

Manufacturer: PCE Instruments
US$ 612.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDA 10

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units. The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.


- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
US$ 612.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DDD 10

The PCE-DDD 10 shore hardness tester and durometer is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.  The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.


- Handheld device
- For Shore D measurements
- Single and Serial Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
US$ 612.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-895

The dual infrared digital thermometer is used for fast surface temperature measurement. The two laser points of the infrared digital thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-895

The dual infrared thermometer is used for fast surface temperature measurement.The two laser points of the infrared thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement.

- Temperature measurement up to 1600 °C / 2912 °F
- Cross laser thermometer
- K-Type or infrared measurement
- Optical resolution 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DMM 21

The manometer PCE-DMM 21 is suitable for flush sanitary installation. The manometer may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the manometer has a food safe FDA approval. The flush mounting of the manometer can be sterilized.


- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PA6000

The 1-Phase Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this ammeter either directly with the supplied test leads, or indirectly by current clamps.


- Performance
- Power factor
- AC voltage and current
- DC voltage and current, resistance and frequency
- Incl. Data Cable and Test Leads
- Software available in the accessories tab

 

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PA6000

The power meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.


- Performance
- Power factor
- AC voltage and current
- DC voltage and current, resistance and frequency

- Incl. Data Cable and Test Leads
- Software available in the accessories tab

 

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PA6000

The power analyzer PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.


- Performance
- Power factor
- AC voltage and current
- DC voltage and current, resistance and frequency

- Incl. Data Cable and Test Leads
- Software available in the accessories tab

 

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DMM 21

The pressure gauge PCE-DMM 21 is suitable for flush sanitary installation. The pressure gauge may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure gauge has a food safe FDA approval. The flush mounting of the pressure gauge can be sterilized.


- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DMM 21

The pressure indicator PCE-DMM 21 is suitable for flush sanitary installation. The pressure indicator may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure indicator has a food safe FDA approval. The flush mounting of the pressure indicator can be sterilized.


- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DMM 21

The pressure meter PCE-DMM 21 is suitable for flush sanitary installation. The pressure meter may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure meter has a food safe FDA approval. The flush mounting of the pressure meter can be sterilized.


- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DMM 21

The pressure sensor PCE-DMM 21 is suitable for flush sanitary installation. The pressure sensor may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure sensor has a food safe FDA approval. The flush mounting of the pressure sensor can be sterilized.


- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-895

The dual infrared pyrometer is used for fast surface temperature measurement. The two laser points of the pyrometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-895

The dual infrared temperature meter is used for fast surface temperature measurement. The two laser points of the infrared temperature meter PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
US$ 606.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer