Order no.: PCE-PDA 100L

The HVAC meter PCE-PDA 100L is a reliable differential pressure gauge for pressure measurement of gases in the range of -100 to +200 kPa. The HVAC meter PCE-PDA 100L has many different pressure measuring functions.

 

- Measuring range: -100 ... 200 kPa  / -14.5 ...  29 psi / -1 ... 2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 10L

The HVAC meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The HVAC meter PCE-PDA 10L has many different pressure measuring functions.


- Measuring range: ± 20 kPa  / ± 2.9 psi / ± 0.2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement
- Pitot tube not included in delivery / optionally selectable

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-MSR 400

PCE-MSR 400 is a multi-position magnetic stirrer with four stirring points for stirring up to four beakers simultaneously. This multi-beaker laboratory stir plate uses the induction method for quiet stirring. The flat stainless steel design is both low profile and easy to clean.


- Adjustable speed: 15 ... 1200 rpm
- Timer
- Stir plate made of stainless steel
- IP65 ingress protection rating
- 4 stirring points

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 100L

The manometer PCE-PDA 100L is a reliable differential pressure gauge for pressure measurement of gases in the range of -100 to +200 kPa. The manometer PCE-PDA 100L has many different pressure measuring functions.


- Measuring range: -100 ... 200 kPa  / -14.5 ...  29 psi / -1 ... 2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 10L

The manometer PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The manometer PCE-PDA 10L has many different pressure measuring functions.


- Measuring range: ± 20 kPa  / ± 2.9 psi / ± 0.2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement
- Pitot tube not included in delivery / optionally selectable

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 10L

The pitot pipe anemometer is a reliable differential pressure gauge for pressure measurement of air in the range of ±20 kPa. The Anemometer can be used in combination with various pitot pipes what makes the instrument very useful in air flow measurements of industrial plants.

- Measuring range: ± 20 kPa  / ± 2.9 psi / ± 0.2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement
- Pitot tube not included in delivery / optionally selectable

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 100L

The pressure gauge PCE-PDA 100L is a reliable differential pressure gauge for pressure measurement of gases in the range of -100 to +200 kPa. The pressure gauge PCE-PDA 100L has many different pressure measuring functions.


- Measuring range: -100 ... 200 kPa  / -14.5 ...  29 psi / -1 ... 2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 10L

The differential pressure gauge PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The differential pressure gauge PCE-PDA 10L has many different pressure measuring functions.

- Measuring range: ± 20 kPa  / ± 2.9 psi / ± 0.2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement
- Pitot tube not included in delivery / optionally selectable

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 100L

The pressure meter PCE-PDA 100L is a reliable differential pressure gauge for pressure measurement of gases in the range of -100 to +200 kPa. The pressure meter PCE-PDA 100L has many different pressure measuring functions.


- Measuring range: -100 ... 200 kPa  / -14.5 ...  29 psi / -1 ... 2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 10L

The pressure meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The pressure meter PCE-PDA 10L has many different pressure measuring functions.


- Measuring range: ± 20 kPa  / ± 2.9 psi / ± 0.2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement
- Pitot tube not included in delivery / optionally selectable

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-PDA 10L

The wind speed meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The wind speed meter PCE-PDA 10L has many different pressure measuring functions.

- Measuring range: ± 20 kPa  / ± 2.9 psi / ± 0.2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement
- Pitot tube not included in delivery / optionally selectable

Manufacturer: PCE Instruments
US$ 593.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GM 80
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
Manufacturer: PCE Instruments
US$ 592.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GM 80
The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
Manufacturer: PCE Instruments
US$ 592.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-GM 80
The surface testing gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
Manufacturer: PCE Instruments
US$ 592.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 5000

The PCE-CT 5000 Automotive Tester is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Automotive Tester goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 5000 µm / 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)

 

Manufacturer: PCE Instruments
US$ 588.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 5000

The PCE-CT 5000 Coating Thickness Gauge is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Coating Thickness Gauge goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 0 ... 5000 µm / 0 ... 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)

 

Manufacturer: PCE Instruments
US$ 588.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 5000

The PCE-CT 5000 Paint Gauge is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Paint Gauge goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 5000 µm / 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)

 

Manufacturer: PCE Instruments
US$ 588.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-RTS 520

The PCE-RTS 520 is a roughness force test stand that works with the PCE-RT Series. If the Ra value of the surface is low then you should use a test stand to ensure precise measurements.


- Stroke is 200 mm
- Dimensions are 260 x 180 x 12 mm
- Weight is 7.3 kg

 

Manufacturer: PCE Instruments
US$ 588.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 5000

The PCE-CT 5000 Thickness Meter is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Thickness Meter goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 5000 µm / 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)

 

Manufacturer: PCE Instruments
US$ 588.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 5000

The PCE-CT 5000 Thickness Test Instrument is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Thickness Test Instrument goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.

  • Measuring range: 5000 µm / 196.8 mils
  • Ferrous metals (Fe)
  • Non-ferrous metals (NFe)
  • Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)
Manufacturer: PCE Instruments
US$ 588.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer